Your shopping cart is empty!
Your shopping cart is empty!
JTOPTICS Optical adaptor uses zirconia or Phosphor Bronze sleeve used for high precision alignment for reliability and improved reconnect ability and complied to Bell core GR-326 performance requirement. We adopt high quality raw materials and make these fiber optic adapters strictly according to international standard, this makes our fiber optic adapters fully compatible with the products from other manufacturers' in the market.Complies with IEC 61754-15High precision alignment sleeveLow insertion loss and high reconnect abilityRoHS, REACH SvHC compliant..
₹ 106.20 Ex Tax: ₹ 90.00
JTOPTICS Optical adaptor uses zirconia or Phosphor Bronze sleeve used for high precision alignment for reliability and improved reconnect ability and complied to Bell core GR-326 performance requirement. We adopt high quality raw materials and make these fiber optic adapters strictly according to international standard, this makes our fiber optic adapters fully compatible with the products from other manufacturers' in the market.Complies with IEC 61754-15High precision alignment sleeveLow insertion loss and high reconnect abilityRoHS, REACH SvHC compliant..
₹ 53.10 Ex Tax: ₹ 45.00
JTOPTICS Optical adaptor uses zirconia or Phosphor Bronze sleeve used for high precision alignment for reliability and improved reconnect ability and complied to Bell core GR-326 performance requirement. We adopt high quality raw materials and make these fiber optic adapters strictly according to international standard, this makes our fiber optic adapters fully compatible with the products from other manufacturers' in the market.Complies with IEC 61754-15High precision alignment sleeveLow insertion loss and high reconnect abilityRoHS, REACH SvHC compliant..
₹ 106.20 Ex Tax: ₹ 90.00
JTOPTICS Optical adaptor uses zirconia or Phosphor Bronze sleeve used for high precision alignment for reliability and improved reconnect ability and complied to Bell core GR-326 performance requirement. We adopt high quality raw materials and make these fiber optic adapters strictly according to international standard, this makes our fiber optic adapters fully compatible with the products from other manufacturers' in the market.Complies with IEC 61754-15High precision alignment sleeveLow insertion loss and high reconnect abilityRoHS, REACH SvHC compliant..
₹ 53.10 Ex Tax: ₹ 45.00
JTOPTICS Optical adaptor uses zirconia or Phosphor Bronze sleeve used for high precision alignment for reliability and improved reconnect ability and complied to Bell core GR-326 performance requirement. We adopt high quality raw materials and make these fiber optic adapters strictly according to international standard, this makes our fiber optic adapters fully compatible with the products from other manufacturers' in the market.Complies with IEC 61754-15High precision alignment sleeveLow insertion loss and high reconnect abilityRoHS, REACH SvHC compliant ..
₹ 141.60 Ex Tax: ₹ 120.00
JTOPTICS Optical adaptor uses zirconia or Phosphor Bronze sleeve used for high precision alignment for reliability and improved reconnect ability and complied to Bell core GR-326 performance requirement. We adopt high quality raw materials and make these fiber optic adapters strictly according to international standard, this makes our fiber optic adapters fully compatible with the products from other manufacturers' in the market.Complies with IEC 61754-15High precision alignment sleeveLow insertion loss and high reconnect abilityRoHS, REACH SvHC compliant ..
₹ 141.60 Ex Tax: ₹ 120.00
The JT Mobility Mode 3 charging cable serves as the connecting link between the charging station and the electric car, enabling the charging of electric vehicles equipped with Type 2 plugs. This cable conforms to the ISO 17409 and IEC 61851 standards for mode 3 charging and is universally compatible with all charging stations, as well as electric vehicles with the Type 2 standard.Designed to operate safely on charging stations of varying power capacities, this cable is suitable for use in all environments, including outdoor and rainy conditions. Its robust structure allows it to withstand potential vehicle-related pressure. The Type 2 (Male) – Type 2 (Female) Cable facilitates a single-phase 16Amps charge to flow into the electric vehicle. Its purpose is to connect the vehicle with the Electric Vehicle Supply Equipment (EVSE) Socket (Female) to the Electric Vehicle Inlet Socket (Male). Type 2 IEC 62196-2 Male to Type 2 Female, Single Phase, 16 Amp, 3Kw, 5 meter.Plug in/pull out &g..
₹ 12,980.00 Ex Tax: ₹ 11,000.00
The JT Mobility Single Phase 32A Type 2 tethered charging cable is specifically crafted for mode 3 charging, offering seamless connection and charging compatibility with both private and public AC charging stations. This Type-2 AC charging cable is comprised of a vehicle charging connector and an open cable end wire, designed for efficiently charging electric vehicles (EVs) with alternating current (AC).The connector features an ergonomic design, ensuring easy and comfortable handling during connection. When the cable is plugged in, it is safeguarded against the intrusion of particles and water. The protective cover possesses an IP55 degree of protection, effectively shielding against dust ingress. This open-end cable replacement is intended for integration into the charging station, allowing users to charge their EVs equipped with a Type 2 port. With a visually appealing design, a hand-friendly ergonomic structure, and user-friendly plug-in ease, this product combines practicality wit..
₹ 9,912.00 Ex Tax: ₹ 8,400.00
JTOPTICS MPO Cassette Modules are fitted with 12 Fibers breakout cable and have LC adapters on the front side and MPO Adaptor at the rear. This cassette is made into smaller size and can be deployed in an ODF. JTOPTICS MPO Cassette Modules reduce the overall cost and setup time for complex high density networking used in data center applicationHigh density pre-terminated fiber optic systemComplied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942Aluminum alloy shell protect the inner fibers effectivelyHigh-quality MPO connectors and guaranteed by 3D interferometerSmall Design and Compatible with HD Fiber Enclosures..
₹ 3,835.00 Ex Tax: ₹ 3,250.00
JTOPTICS MPO pre-terminated Trunk Cables are designed for high density application which offers excellent benefits in terms on-site installation time and space saving. The trunk cable assemblies are composed of high quality LSZH jacketed fiber optic cables used in data center, telecom and backbone application for 100G, 400G & 800G connectivity. MPO cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables..
₹ 3,717.00 Ex Tax: ₹ 3,150.00
JTOPTICS® 400G QSFP-DD Breakout AOC (Active Optical Cable) assemblies include 400G QSFP-DD to 2x 200G QSFP56 breakout AOC. The module integrates eight parallel lanes on 400G end and fan-out to two parallel lanes on each 200G end. Each lane operate 53.125Gb/ps PAM4 modulation signal. These 400G parallel breakout Active Optical Cable (AOC) assemblies transmit parallel 8x 50G PAM4 signals over multi-mode fiber (MMF) cables up to 100m. Compliant with QSFP-DD/SFP MSA and CMIS 4.0. They are designed with high performance, high density and low power, which are suitable for short range interconnection for data center, high-performance computing networks.Hot-pluggable QSFP-DD/QSFP56 form factor full-duplex transceiver assembly8-channels 850nm VCSEL array and PIN photo-detector arrayData rate up to 53.125Gbps (26.5625GBd PAM4) per channel.400GAUI-8 and 200GAUI-4 electrical interfacesCompliant with QSFP-DD MSA, CMIS 4.0 and IEEE 802.3cm 400GBASE-SR8Compliant with QSFP56 MSA and IEEE 802.3cd..
₹ 166,498.00 Ex Tax: ₹ 141,100.00
JTOPTICS 400G QSFP-DD to 4x 100G QSFP28 PCC (Passive Copper Cable), also known as Direct Attach Copper (DAC) cable or Twinax cable, provides robust connections between 400G Ethernet and 100G Ethernet systems. Each cable consists of four lanes each operating at data rates of up to 100Gb/s (PAM4). This integrated cable solution provides reliable transport for aggregate data rates of up to 400Gb/s. Optimizing systems to operate with JTOPTICS 400Gb/s passive copper cables significantly reduces power consumption and EMI emission, eliminating the use of Enterprise Data Center (EDC) hosts.Hot-pluggable QSFP-DD form factor Data rate up to 425Gbps.8x 53Gb/s PAM4 modulation QSFP-DD MSA, CMIS and IEEE 802.3 compliant Operating case temperature of 0-70℃ 8x50G PAM4 Retimed 400GAUI-8 Electrical InterfaceCopper link length up to 3m Supports 400G to 4x100G Ethernet InteroperabilitySingle 3.3V supply voltage Bit Error Rate (BER) better than 1E-15 RoHS compliantData ra..
₹ 21,676.60 Ex Tax: ₹ 18,370.00
JTOPTICS® QSFPDD 400GBASE DR4 is offers a transmission distance of up to 500 meter over a single mode fiber link. Quad Small Form Factor Pluggable Double Density (QSFP DD) transceiver with optical MPO 12/MTP 12 connector is designed for long range single mode 400 Gigabit Ethernet (400GbE) high speed applications of up to 400 gigabits per second. The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane. It can be used as 4x100G breakout to QSFP28 DR 100G. It supports link lengths of up to 500m parallel SMF with MTP/MPO 12 connector. It is compliant to QSFP DD MSA, IEEE 802.3bs protocol and 400GAUI 8 standards. It can be used as 4x100G breakout to QSFP28 DR 100G..QSFP DD MSA and CMIS compliant Compliant to 802.3bs 400GBASE DR4 8x53.125Gbit/s PAM4 electrical interface(400GAUI 8) 4x106.25Gbps(53.125GBd PAM4) Optics architecture Power consumption <10W Maximum link length of 500m G.652 SMF with KP FEC&n..
₹ 108,111.60 Ex Tax: ₹ 91,620.00
JTOPTICS Ethernet to Dual fiber converter can convert and transmit Ethernet networks into fiber optic networks on dual fiber, it is used in Ethernet as copper to fiber conversion equipment. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port with Auto-MDIX capability for more convenient connection. Built-in 10/100 switch enables the fiber able connection to operate at 100 Mbps connected to either a 10BaseT or 100BaseTX network, while remaining completely 100BaseFX standard-compliantComplied with IEEE802.3 10Base-T, IEEE802.3u 100Base-T and 100Base-FXAuto-adaptation Support Full/half-duplex mode at twisted pair portSupport Auto MDI/MDIX without need of cable selectionUp to 6 LEDs for status indicationExternal and buil..
₹ 1,416.00 Ex Tax: ₹ 1,200.00
JTOPTICS uniboot LC-LC Fiber patch cable is constructed with advanced flat clip Uniboot LC connectors, specifically tailored for high-density data center settings, as seen in UHD series products. Its streamlined design reduces bulk fiber optic cabling by 50% compared to traditional duplex cables, featuring a thinner body. The cable employs a unique "round duplex" design, enabling duplex transmission within a single 2mm cable. These characteristics enhance airflow and visibility in high-density network environments. ..
₹ 495.60 Ex Tax: ₹ 420.00
JTOPTICS Single mode to Multimode Media Optical Converter is a device to conduct the transparent conversion between the media of single mode and multimode optical fiber. It is used in the applications where media conversion required between multimode segments separated by long distances. We offer different single mode to multimode media converters from 850nm to 1310nm wavelengths. Multimode to Single mode Converters provide efficient solutions for interconnecting multimode fiber LANs over longer distances by integrating single mode fiber optic cable into the LAN. The converter also enables Ethernet LAN and WAN connectivity, by providing a multimode interface to single mode fiber carrier demarcation points.Extend a Ethernet backbone connection up to 20 km for MAN applicationsConverts Multimode to Single mode (and vice versa)Converts Single mode to Single mode or Multimode to MultimodeIncreases Distance Between NodesCross Connects Fiber TypesPerforms Optical Repeater Function..
₹ 1,652.00 Ex Tax: ₹ 1,400.00
JTOPTICS optical fiber patch cords are designed for low loss telecommunication applications. The patch cords provide flexible interconnection to active equipment, passive optical devices and cross-connects. JTOPTICS Fiber patch cords are terminated with premium grade zirconia ferrule connectors which help assure high transmission quality and low optical power loss, cables are 100% optically tested for insertion loss to ensure high quality. JTOPTICS patch cables adhere to industry standards, including IEC 62005, BS-EN 61754, IEC 61300, and Telcordia GR-326-CORE. Designed for Telecom and Data Center needs, they are available in OM3, OM4, OM5, or OS2 fiber types. Each terminator undergoes meticulous parameter testing to guarantee optimal network performance...
₹ 401.20 Ex Tax: ₹ 340.00
JTOPTICS SFP based Ethernet to Fiber Converters provide an economical path to extend the distance of an existing network, the life of non-fiber based equipment, or the distance between two devices. The pluggable fiber optics port allows for flexible network configurations using SFP transceivers supplied by us or other manufacturers of MSA compliant SFPs. For steady and reliable performance it is designed in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission.Complied with IEEE802.3 10Base-T, IEEE802.3u 100Base-TIEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-FXAuto-adaptation rateSupport Full/half-duplex mode at twisted pair portSupport Auto MDI/MDIX without need of cable selectionUp to 6 LEDs for status indicationExternal and built-in DC power suppliesSupport up to 1024 MAC addresses512 kb data integrated storage..
₹ 1,239.00 Ex Tax: ₹ 1,050.00
The JT Mobility Mode 3 charging cable serves as the connecting link between the charging station and the electric car, enabling the charging of electric vehicles equipped with Type 2 plugs. This cable conforms to the ISO 17409 and IEC 61851 standards for mode 3 charging and is universally compatible with all charging stations, as well as electric vehicles with the Type 2 standard.Designed to operate safely on charging stations of varying power capacities, this cable is suitable for use in all environments, including outdoor and rainy conditions. Its robust structure allows it to withstand potential vehicle-related pressure. The Type 2 (Male) – Type 2 (Female) Cable facilitates a three-phase 16Amps charge to flow into the electric vehicle. Its purpose is to connect the vehicle with the Electric Vehicle Supply Equipment (EVSE) Socket (Female) to the Electric Vehicle Inlet Socket (Male). Type 2 IEC 62196-2 Male to Type 2 Female, three Phase, 16 Amp, 11Kw, 5 meter.Plug in/pull out >..
₹ 14,632.00 Ex Tax: ₹ 12,400.00
The JT Mobility Three Phase 32A Type 2 tethered charging cable is specifically crafted for mode 3 charging, offering seamless connection and charging compatibility with both private and public AC charging stations. This Type-2 AC charging cable is comprised of a vehicle charging connector and an open cable end wire, designed for efficiently charging electric vehicles (EVs) with alternating current (AC).The connector features an ergonomic design, ensuring easy and comfortable handling during connection. When the cable is plugged in, it is safeguarded against the intrusion of particles and water. The protective cover possesses an IP55 degree of protection, effectively shielding against dust ingress. This open-end cable replacement is intended for integration into the charging station, allowing users to charge their EVs equipped with a Type 2 port. With a visually appealing design, a hand-friendly ergonomic structure, and user-friendly plug-in ease, this product combines practicality with..
₹ 14,632.00 Ex Tax: ₹ 12,400.00
HDTVI/HDCVI/AHD Video to Optical fiber converter required to transmit HDTVI/HDCVI/AHD Camera Video to long distance (Up to 80km) over optical fiber. 1 Channel HDTVI/HDCVI/AHD to Fiber Converter can simultaneously transmit 1 channels of HDTVI/HDCVI/AHD Video over one single-mode optical fiber. LED indicators are provided for instantly monitoring system status. Compatible with HDTVI/HDCVI/AHD-H, HDTVI/HDCVI/AHD-M , HDTVI/HDCVI/AHD-L. Lossless non-compression real time transmission. Electronic and optical adjustments are never required. Compatible with 1080P/50,1080P/60 Lossless non-compression real time transmission.10-bit digitally encoded and non-compression broadcast quality video transmissionDirectly compatible with NTSC, PAL, and SECAM CCTV camera systemsSupport analog video signal VIDEO : 1080P/50,1080P/60Video Supported: 1-ch unidirectional, Data: 1-ch reverse RS485..
₹ 10,148.00 Ex Tax: ₹ 8,600.00
JTOPTICS Gigabit Ethernet to Dual fiber converter can convert and transmit Gigabit Ethernet networks into Gigabit fiber optic networks on dual fiber, it is used in Gigabit Ethernet as copper to fiber conversion equipment. Each Media Converter provides a 10/100/1000BaseT/TX auto-negotiating RJ-45 twisted-pair connector port with Auto-MDIX capability for more convenient connection. Built-in 10/100/1000 switch enables the fiber able connection to operate at 1000 Mbps connected to either a 10BaseT or 100BaseTX or 1000BaseTX network, while remaining completely 1000BaseFX standard-compliant10/100/1000Mbps auto-negotiationIEEE 802.3x full-duplex flow control and back pressure half-duplex flow controlSupports MAC self-learningStandards: Complied with IEEE802.3 10Base-T, IEEE802.3u 100Base-T IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-FX &nb..
₹ 2,832.00 Ex Tax: ₹ 2,400.00
JTOPTICS MPO Cassette Modules are fitted with 12 Fibers breakout cable and have LC adapters on the front side and MPO Adaptor at the rear. This cassette is made into smaller size and can be deployed in an ODF. JTOPTICS MPO Cassette Modules reduce the overall cost and setup time for complex high density networking used in data center applicationHigh density pre-terminated fiber optic systemComplied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942Aluminum alloy shell protect the inner fibers effectivelyHigh-quality MPO connectors and guaranteed by 3D interferometerSmall Design and Compatible with HD Fiber Enclosures..
₹ 4,071.00 Ex Tax: ₹ 3,450.00
JTOPTICS MPO pre-terminated Trunk Cables are designed for high density application which offers excellent benefits in terms on-site installation time and space saving. The trunk cable assemblies are composed of high quality LSZH jacketed fiber optic cables used in data center, telecom and backbone application for 100G, 400G & 800G connectivity. MPO cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables..
₹ 4,000.20 Ex Tax: ₹ 3,390.00
