Mpo Connector

JTOPTICS® MPO Connector

The MPO (Multi-fiber Push On) connector is a multi-Fiber connector, the connector can be from 12 to 72 fibers located on the 12 fibers in a row. MPO connector is standardized in the international regulatory framework (the IEC 61754-7 standard) and the U.S. (TIA-604-5 Standard).

MPO connector is designed for high-density transmission and space-saving applications. Each individual connector contains 8, 12 or 24 strands of fiber through an MT ferrule, which provides quick and reliable interconnections with guide pin. MPO optical connector with guide pin called male type, and female type if without guide pin.

 

MPO connector kits include Dust Cap, Outer Housing, (Guide Pin) Pin Keeper, Spring, Rear Body, Crimp Ring, Boot. Guide Pin only appears in the male type of connector

MT Ferrule For MPO

MT Ferrule is one of the key parts in the connector. Optical properties like insertion loss & return loss of connector are mostly depends on the quality of ferrule.

High performance IL & RL

Housing can be removed for re-polishing

Can be un-plugged from adapter with push-pull tab

Available for 45-degree, 90-degree and flexible boot

IEC 61754-7 and TIA/EIA 604-5 Compliant for MPO/MTP interfaces

MPO Flex Boot Angled Boot Connector

Flex-Boot connector is designed to fit in tight spaces and in applications where a non-standard angle of connection is required. These fiber optic patch cables are built using pvc jackets along. These cables utilize specialized flexible boots that can be bent in a variety of angles including 90° without exceeding the recommended bend tolerances of the cable. Bend them into the angle that best fits your application.