Your shopping cart is empty!
JTOPTICS® Active Optical Cable (AOC) cable assemblies are
designed to meet data center, networking and high-performance computing
application needs for a high-density cabling interconnect system. We can
customize the cable compatibility for major brands like
Cisco, Juniper, Arista, Dell, HPE, Extreme, Brocade, Mellanox, H3C, Intel, IBM,
Nokia, Zte, Ciena, Huawei, Ixia etc.
JTOPTICS® 800G QSFP-DD AOC (active optical cable) is a 800 Gb/s parallel active optical cable, which transmits parallel 8×100 Gb/s PAM4 signals over multi-mode fiber (MMF) cables up to 30m. It is compliant with QSFP-DD MSA. The 800G QSFP-DD AOC cables supports eight electrical interface lanes, each of which operate in the data rate of 106.25G/s, with an overall aggregate bandwidth up to 850Gb/s. These modules of cables are designed to operate over multi-mode fiber systems using a nominal wavelength of 850nm. This cable is compliant with IEEE 802.3ck, QSFP-DD HW Specification Rev 6.3, and CMIS Rev 5.0. The built-in digital diagnostics monitoring (DDM) allows access to real-time operating parameters.Hot-pluggable QSFP-DD AOC assemblies8x 100G PAM4 electrical interface8x 100G PAM4 optical interfaceData rate up to 106.25Gbps per channelCompliant with QSFP-DD MSA, CMIS and IEEE 802.3Low power dissipationCommercial Case Temperature 0°C to 70°CSingle 3.3V power supplyBuilt-in digital diagnost..
JTOPTICS® 800G OSFP AOC (active optical cable) is a 800 Gb/s parallel active optical cable, which transmits parallel 8×100 Gb/s PAM4 signals over multi-mode fiber (MMF) cables up to 30m. It is compliant with OSFP MSA. The 800G OSFP AOC cables supports eight electrical interface lanes, each of which operate in the data rate of 106.25G/s, with an overall aggregate bandwidth up to 850Gb/s. These modules of cables are designed to operate over multi-mode fiber systems using a nominal wavelength of 850nm. This cable is compliant with IEEE 802.3ck, QSFP-DD HW Specification Rev 6.3, and CMIS Rev 5.0. The built-in digital diagnostics monitoring (DDM) allows access to real-time operating parameters.Hot-pluggable OSFP AOC assemblies8x 100G PAM4 electrical interface8x 100G PAM4 optical interfaceData rate up to 106.25Gbps per channelCompliant with OSFP MSA, CMIS and IEEE 802.3Low power dissipationCommercial Case Temperature 0°C to 70°CSingle 3.3V power supplyBuilt-in digital diagnostic functionalit..
JTOPTICS® 400G QSFP-DD AOC (active optical cable) is a 400 Gb/s parallel active optical cable, which transmits parallel 8×50 Gb/s PAM4 signals over multi-mode fiber (MMF) cables up to 100m. It is compliant with QSFP-DD MSA and the CMIS 4.0. The 400G QSFP56-DD AOC cables supports eight electrical interface lanes, each of which operate in the data rate of 53.125G, with an overall aggregate bandwidth up to 425Gb/s. These modules of cables are designed to operate over multi-mode fiber systems using a nominal wavelength of 850nm.The electrical interface uses a 76 contact edge type connector. This active optical cable is compliant with IEEE 802.3cd, OIF-CEI-04.0, QSFP-DD MSA, and QSFP-DD-CMIS-rev4p0.Hot-pluggable QSFP-DD active optical cable assemblies8x 50G PAM4 electrical interface8x 50G PAM4 optical interfaceData rate up to 53.125Gbps per channel.8-channels 850nm VCSEL array and PIN photo-detector arrayCompliant with QSFP-DD MSA, CMIS and IEEE 802.3Low power dissipationCompliant with IEEE..
The Arista AOC-D-D-400G is a 400G Active Optical Cable (AOC) designed for high-speed data transfer between QSFP-DD (Quad Small Form-Factor Pluggable Double Density) ports. Utilizing OM3 multimode fiber, it supports 400Gbps Ethernet for short-range connections in data centers and high-performance networks. The active optical design ensures superior signal quality, reduced latency, and low power consumption, making it an ideal solution for high-density environments. With enhanced reach over traditional copper cables, the Arista AOC-D-D-400G provides efficient, reliable, and scalable connectivity for modern infrastructures that demand robust performance and seamless data transmission in demanding network applications...
The Cisco QDD-400-AOC is a 400G Active Optical Cable (AOC) designed for high-speed, short-distance data transmission in data centers and enterprise networks. It features QSFP-DD (Quad Small Form-Factor Pluggable Double Density) connectors on both ends and uses OM3 multimode fiber to support 400Gbps Ethernet. This AOC offers excellent signal integrity, lower power consumption, and reduced latency, making it ideal for high-density, high-performance environments. Its active optical design allows for extended reach compared to copper alternatives, while maintaining efficient and reliable connectivity. The Cisco QDD-400-AOC is a robust solution for demanding workloads and scalable network architectures...
The Dell AOC-Q56DD-400G is a 400G Active Optical Cable (AOC) designed for connecting QSFP-DD (Quad Small Form-Factor Pluggable Double Density) ports using OM3 multimode fiber. This high-performance cable supports 400Gbps Ethernet, making it ideal for short-range data transmission in data centers, cloud infrastructures, and high-performance computing environments. With an active optical design, it provides superior signal integrity, reduced latency, and lower power consumption compared to traditional copper cables. The Dell AOC-Q56DD-400G ensures reliable, scalable, and energy-efficient connectivity, making it an excellent choice for high-density networks that require fast, seamless data transfer and robust performance...
The Juniper QDD-400G-AOC is a 400G Active Optical Cable (AOC) designed to connect QSFP-DD (Quad Small Form-Factor Pluggable Double Density) ports using OM3 multimode fiber. This high-performance cable supports 400Gbps Ethernet, ideal for short-distance connections in data centers, cloud environments, and high-performance computing. The active optical design delivers superior signal integrity, reduced latency, and lower power consumption, offering a significant advantage over copper alternatives. Optimized for high-density and scalable network infrastructures, the Juniper QDD-400G-AOC provides reliable and efficient connectivity, ensuring seamless data transmission in demanding, bandwidth-intensive applications that require robust and flexible networking solutions...
The Mellanox/Nvidia MFA1W00-W is a 400G Active Optical Cable (AOC) designed for high-speed connections between QSFP-DD (Quad Small Form-Factor Pluggable Double Density) ports. Utilizing OM3 multimode fiber, this AOC supports 400Gbps Ethernet, making it ideal for short-distance, high-bandwidth applications in data centers and cloud environments. Its active optical design ensures enhanced signal integrity, reduced latency, and improved power efficiency compared to copper cables, allowing for reliable performance in high-density setups. The Mellanox/Nvidia MFA1W00-W offers seamless, scalable connectivity, meeting the demands of modern network infrastructures with its robust, low-latency, and energy-efficient operation...
JTOPTICS® 400G QSFP56-DD AOC (active optical cable) is a 400 Gb/s parallel active optical cable, which transmits parallel 4X100 Gb/s PAM4 signals over multi-mode fiber (MMF) cables up to 100m. It is compliant with QSFP56-DD MSA and the CMIS 4.0. The 400G QSFP56-DD AOC cables supports eight electrical interface lanes, each of which operate in the data rate of 100G, with an overall aggregate bandwidth up to 425Gb/s. These modules of cables are designed to operate over multi-mode fiber systems using a nominal wavelength of 850nm.The electrical interface uses a 76 contact edge type connector. This active optical cable is compliant with IEEE 802.3cd, OIF-CEI-04.0, QSFP-DD MSA, and QSFP-DD-CMIS-rev4p0.Hot-pluggable QSFP-DD active optical cable assemblies4x 100G PAM4 electrical interface4x 100G PAM4 optical interfaceData rate up to 100Gbps per channel.8-channels 850nm VCSEL array and PIN photo-detector arrayCompliant with QSFP-DD MSA, CMIS and IEEE 802.3Low power dissipationCompliant with IEE..
The Dell 470-BBGD 400G QSFP56 Active Optical Cable (AOC) is a high-performance, multimode OM3 fiber solution designed for high-speed data transmission over short distances. It connects two QSFP56-DD (Quad Small Form-Factor Pluggable Double Density) ports, supporting 400Gbps Ethernet and optimized for data centers and high-performance computing environments. With its active optical design, the cable offers enhanced signal integrity, low power consumption, and longer reach compared to copper alternatives. Ideal for high-density applications, the Dell 470-BBGD provides reliable, low-latency performance for demanding workloads, ensuring seamless connectivity and efficient operation in advanced networking setups. It is a robust, scalable choice...
JTOPTICS® 400G QSFP112 AOC (active optical cable) is a 400 Gb/s parallel active optical cable, which transmits parallel 8×50 Gb/s PAM4 signals over multi-mode fiber (MMF) cables up to 100m. It is compliant with QSFP112 MSA and the CMIS 4.0. The 400G QSFP112 AOC cables supports eight electrical interface lanes, each of which operate in the data rate of 53.125G, with an overall aggregate bandwidth up to 425Gb/s. These modules of cables are designed to operate over multi-mode fiber systems using a nominal wavelength of 850nm.The electrical interface uses a 76 contact edge type connector. This active optical cable is compliant with IEEE 802.3cd, OIF-CEI-04.0, QSFP112 MSA.Hot-pluggable QSFP112 active optical cable assemblies8x 50G PAM4 electrical interface8x 50G PAM4 optical interfaceData rate up to 53.125Gbps per channel.8-channels 850nm VCSEL array and PIN photo-detector arrayCompliant with QSFP112 MSA, CMIS and IEEE 802.3Low power dissipationCompliant with IEEE 802.3cd 200GBASE-SR4 and I..
JTOPTICS® 400G OSFP AOC (active optical cable) is a 400 Gb/s parallel active optical cable, which transmits parallel 8×50 Gb/s PAM4 signals over multi-mode fiber (MMF) cables up to 100m. It is compliant with OSFP MSA and the CMIS 4.0. The 400G OSFP AOC cables supports eight electrical interface lanes, each of which operate in the data rate of 53.125G, with an overall aggregate bandwidth up to 425Gb/s. These modules of cables are designed to operate over multi-mode fiber systems using a nominal wavelength of 850nm.The electrical interface uses a 76 contact edge type connector. This active optical cable is compliant with IEEE 802.3cd, OIF-CEI-04.0, OSFP MSA.Hot-pluggable OSFP active optical cable assemblies8x 50G PAM4 electrical interface8x 50G PAM4 optical interfaceData rate up to 53.125Gbps per channel.8-channels 850nm VCSEL array and PIN photo-detector arrayCompliant with OSFP MSA, CMIS and IEEE 802.3Low power dissipationCompliant with IEEE 802.3cd 200GBASE-SR4 and InfiniBand HDR/HDR1..
The Arista AOC-O-O-400G is a 400G OSFP Active Optical Cable (AOC) designed for high-speed data transmission in data centers and high-performance computing environments. This cable connects two OSFP (Octal Small Form-Factor Pluggable) ports and supports 400Gbps Ethernet speeds over OM3 multimode fiber. Its active optical design ensures superior signal quality, low latency, and energy efficiency, enabling extended reach compared to traditional copper cables. Optimized for short-range, high-density applications, the Arista AOC-O-O-400G provides reliable, scalable connectivity with low power consumption, making it ideal for modern networking infrastructures requiring top-tier performance and minimal signal degradation...
JTOPTICS® 400G QSFP-DD Breakout AOC (Active Optical Cable) assemblies include 400G QSFP-DD to 2x 200G QSFP56 breakout AOC. The module integrates eight parallel lanes on 400G end and fan-out to two parallel lanes on each 200G end. Each lane operate 53.125Gb/ps PAM4 modulation signal. These 400G parallel breakout Active Optical Cable (AOC) assemblies transmit parallel 8x 50G PAM4 signals over multi-mode fiber (MMF) cables up to 100m. Compliant with QSFP-DD/SFP MSA and CMIS 4.0. They are designed with high performance, high density and low power, which are suitable for short range interconnection for data center, high-performance computing networks.Hot-pluggable QSFP-DD/QSFP56 form factor full-duplex transceiver assembly8-channels 850nm VCSEL array and PIN photo-detector arrayData rate up to 53.125Gbps (26.5625GBd PAM4) per channel.400GAUI-8 and 200GAUI-4 electrical interfacesCompliant with QSFP-DD MSA, CMIS 4.0 and IEEE 802.3cm 400GBASE-SR8Compliant with QSFP56 MSA and IEEE 802.3cd..
The HPE Aruba P45733-B is a high-performance 400G to 2x200G Active Optical Cable (AOC) designed for seamless connectivity in data centers and high-bandwidth networking environments. This cable features a QSFP-DD (Quad Small Form-Factor Pluggable Double Density) connector on one end and two QSFP56 (Quad Small Form-Factor Pluggable 56) connectors on the other, allowing for the splitting of a 400Gbps connection into two 200Gbps links. Utilizing OM3 multimode fiber, the P45733-B ensures excellent signal quality and low latency, making it ideal for demanding applications. Its active optical design offers energy efficiency and extended reach, providing reliable and scalable connectivity for modern network architectures...
JTOPTICS® 400G QSFP-DD Breakout AOC (Active Optical Cable) assemblies include 400G QSFP-DD to 4x 100G QSFP56 breakout AOC. The module integrates eight parallel lanes on 400G end and fan-out to four parallel lanes on each 100G end. Each lane operate 53.125Gb/ps PAM4 modulation signal. These 400G parallel breakout Active Optical Cable (AOC) assemblies transmit parallel 8x 50G PAM4 signals over multi-mode fiber (MMF) cables up to 100m. Compliant with QSFP-DD/SFP MSA and CMIS 4.0. they are designed with high performance, high density and low power, which are suitable for short range interconnection for data center, high-performance computing networks,Hot-pluggable QSFP-DD/QSFP28 form factor full-duplex transceiver assembly8-channels 850nm VCSEL array and PIN photo-detector arrayData rate up to 53.125Gbps (26.5625GBd PAM4) per channel400GAUI-8 and 100GAUI-2 electrical interfacesCompliant with QSFP-DD MSA, CMIS 4.0 and IEEE 802.3cm 400GBASE-SR8Compliant with InfiniBand HDR/HDR100MMF cable wi..
The Dell 470-AEDF is a versatile 400G to 4x100G Active Optical Cable (AOC) designed for high-performance connectivity in data centers and enterprise networks. This cable features a QSFP-DD (Quad Small Form-Factor Pluggable Double Density) connector on one end and four QSFP28 (Quad Small Form-Factor Pluggable) connectors on the other, enabling the aggregation of four 100Gbps connections. Utilizing OM3 multimode fiber, it ensures excellent signal integrity and low latency, making it suitable for high-density applications. The active optical design provides energy efficiency and extended reach compared to copper alternatives, facilitating seamless data transmission and scalability in modern network infrastructures...
JTOPTICS® 400G QSFP-DD to 8x50G SFP56 breakout active optical cables operate over multi-mode fibers (MMF). This breakout cable is compliant with QSFP-DD MSA/SFP28 MSA and IEEE 802.3cd Standards. Thin and lightweight AOC cables simplify cable management, enabling an efficient system airflow, which is critical in high-density racks. It is used extensively in cloud and supercomputers due to its low cost, high-value proposition, and increased reliability.JTOPTICS 400G QSFP-DD to 8x 50G SFP56 Breakout AOC (Active Optical Cable) assemblies are designed to support 400G/4x50G Ethernet and InfiniBand HDR/HDR100, suitable for data center and HPC (High-Performance Computing) links up to 100m over multi-mode fiber.Hot Pluggable QSFP-DD and SFP56 MSA Compliant8-channels 850nm VCSEL array and PIN photo-detector arrayData rate up to 53.125Gbps (26.5625GBd PAM4) per channel.400GAUI-8 electrical interfacesCompliant with QSFP-DD MSA, CMIS 4.0 and IEEE 802.3cm 400GBASE-SR8Supports 400G to 8x 50G Ethernet..
JTOPTICS® 200G QSFP56 AOC is a QSFP56 VCSEL (Vertical Cavity Surface-Emitting Laser) based active optical cable (AOC) designed for use in 200Gb/s Ethernet or InfiniBand HDR systems. The 200G QSFP56 AOC offers high-end port density and configurability, and a much longer reach than passive copper cables in the data centers. 200G QSFP56 AOC has a standard SFF-8665 compliant QSFP56 port on the electrical side towards the host system. It contains four channels multi-mode fibers (MMF) optic transceivers per end, each channel of transceivers operates data rates up to 50Gb/ with PAM4 modulated signals (4x 50G PAM4). Assembled with fixed length of fiber cable, the AOC is easy to install and replace. Hot-pluggable QSFP56 form factor full-duplex transceiver assembly4-channel 850nm VCSEL array and PIN photo-detector arrayData rate up to 53.125Gbps (26.5625GBd PAM4) per channel.200GAUI-4 electrical interfaceCompliant with QSFP56 MSA, CMIS 4.0 and IEEE 802.3cd 200GBASE-SR4Compliant with IEEE 80..
The HPE Aruba P06153-B is a high-performance 200G Active Optical Cable (AOC) designed for connecting QSFP56 ports using OM3 multimode fiber. This cable supports data rates of up to 200Gbps, making it ideal for high-speed data transmission in data centers, cloud environments, and high-performance computing applications. Its active optical design ensures superior signal integrity and low latency while consuming less power compared to traditional copper cables. The P06153-B provides reliable and efficient connectivity, enabling seamless integration within modern networking infrastructures that require high bandwidth and scalable solutions for demanding workloads...
The Juniper QDD-2X200G-AOC is a 200G Active Optical Cable (AOC) designed for connecting QSFP56 ports using OM3 multimode fiber. This cable facilitates high-speed data transmission at rates of up to 200Gbps, making it an ideal solution for data centers, high-performance computing, and cloud networking environments. Its active optical design enhances signal integrity, minimizes latency, and reduces power consumption compared to copper alternatives, ensuring reliable performance in high-density applications. The QDD-2X200G-AOC provides seamless, scalable connectivity, supporting modern network infrastructures that demand efficient and robust data transfer capabilities for demanding workloads...
The Mellanox/Nvidia MFS1S00-V is a 200G Active Optical Cable (AOC) engineered for efficient connectivity between QSFP56 ports, utilizing OM3 multimode fiber. This cable supports data rates of up to 200Gbps, making it suitable for high-speed data transmission in data centers, cloud computing environments, and other bandwidth-intensive applications. Its active optical design enhances signal integrity, reduces latency, and lowers power consumption compared to traditional copper cables, providing reliable performance in high-density setups. The MFS1S00-V is ideal for modern networking infrastructures, ensuring seamless and scalable connectivity while maintaining optimal data transfer efficiency...
JTOPTICS® 200G QSFP28-DD Breakout AOC is a QSFP56 VCSEL-based (Vertical Cavity Surface-Emitting Laser), cost effective 200Gb/s to 2 x 100Gb/s active optical splitter cable (AOC) designed for use in 200G/2x100G Ethernet and InfiniBand EDR applications. It is compliant with QSFP28 and QSFP-DD MSA specifications. It provides connectivity between system units with a 200Gb/s QSFP-DD connector on one side and two separate 100Gb/s QSFP28 connectors on the other side, such as link between a switch and two servers. The cable connects data signals of 8x25G NRZ from one single QSFP-DD end to two QSFP28 ends, which operates 4 x25G NRZ signals each.Hot Pluggable QSFP-DD and QSFP28 MSA Compliant4-channel 850nm VCSEL array and PIN photo-detector arraySupports 200G to 2x 100G Ethernet Interoperability8x 25G NRZ electrical interface8x 25G NRZ optical interfaceData rate up to 25.78125Gbps per channel.Compliant with QSFP-DD MSA, CMIS and IEEE 802.3Low power dissipationMax. Power Consumption 4WCommercial ..
The Dell 470-ACUC is a 200G Active Optical Cable (AOC) designed to connect a QSFP56 port to two QSFP28 ports, effectively allowing the aggregation of a 200Gbps connection into two separate 100Gbps links. Utilizing OM3 multimode fiber, this cable is ideal for high-speed data transmission in data centers, cloud environments, and high-performance computing applications. The active optical design ensures superior signal integrity, low latency, and energy efficiency compared to traditional copper cables. The Dell 470-ACUC provides reliable and scalable connectivity, making it an excellent choice for modern network infrastructures that demand high bandwidth and flexibility for diverse workloads...