Search

Search Criteria

Products meeting the search criteria

Show:
Sort By:

JTOPTICS 100G QSFP28 Transceiver 100GBASE-PSM4 QSFP28 1310nm 2km DOM MTP/MPO-12 SMF Optical Transceiver Module

JTOPTICS® QSFP28 100GBASE PSM4 is a Four Channel, Pluggable, Parallel, Fiber Optic transceiver support InfiniBand DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications. It integrates four data lanes in each direction with 104 Gbps bandwidth. Each lane can operate at 26Gbps up to 2km over Single mode fiber. These modules are designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector.Hot pluggable QSFP28 form factor4 channels full duplex transceiver moduleSupports 103.1Gb/s aggregate bit rate.Max. link length Up to 2km over single mode fiber4 channels 1310nm DFB4 channels PIN photo detector arrayInternal CDR circuits (receiver and transmitter channels)Support CDR bypassTransmission data rate up to 26Gbps per channel.Supports SM MPO/MTP 12 (APC) Connector3.5 W maximum powe..

₹ 20,343.20 Ex Tax: ₹ 17,240.00

JTOPTICS 10G DAC Cable 10GBASE-CR SFP+ passive twinax copper cable 1 Meter 30AWG , Direct Attached Cable

JTOPTICS SFP+ cable assemblies are high-performance, cost-effective I/O solutions for 10Gb Ethernet and 10G Fibre Channel applications. SFP+ passive copper modules allow hardware manufacturers to achieve high port density, configurability, and utilization at a very low cost and to reduce power budget. The high-speed cable assemblies meet and exceed the performance and reliability requirements stipulated by Gigabit Ethernet and Fibre Channel industry standards.JTOPTICS 10G SFP+ Passive Direct Attach Copper Twinax Cable is designed for use in 10GBASE Ethernet. This cable is compliant with IEEE 802.3, SFF-8431, and SFP+ MSA.Hot-pluggable SFP+ DAC cable assemblyData rate up to 10.3125GbpsData rates backward compatible to 1Gb/sHot-pluggable SFP+ 20PIN footprint1x 10G NRZ electrical interfaceCompliant with SFP+ MSA, IEEE 802.3Compliant to SFF-8431 and SFF-8432Low power dissipationOperating case temp. range 0°C to +70°CRoHS-6 compliant (lead free)..

₹ 885.00 Ex Tax: ₹ 750.00

JTOPTICS 24 Fiber Mm Om4 Mpo Lc Break Out Cable, 24f Mpo Female to 12 X Lc Duplex Fan Out / Harness Cable, Low Loss OFNP (Plenum), Om4 Multimode, Aqua, Polarity A

JTOPTICS MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 100G / 400G /800G connectivity. 24 fiber MPO to LC Fan out Assemblies provide connections between single CFP/CXP (100G transceiver with MPO interface) and 10 x SFP+ (10G transceivers with LC Duplex Interface). JTOPTICS MPO harness cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables..

₹ 8,850.00 Ex Tax: ₹ 7,500.00

JTOPTICS 24 Fiber Sm Mpo Lc Break Out Cable, 24f Mpo Female to 12 X Lc Duplex Fan Out / Harness Cable, Low Loss OFNR (Riser), G.657A1 Single Mode, Yellow, Polarity A

JTOPTICS MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 100G / 400G /800G connectivity. 24 fiber MPO to LC Fan out Assemblies provide connections between single CFP/CXP (100G transceiver with MPO interface) and 10 x SFP+ (10G transceivers with LC Duplex Interface). JTOPTICS MPO harness cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables..

₹ 8,437.00 Ex Tax: ₹ 7,150.00

JTOPTICS 25G AOC Cable SFP28 to SFP28 Active Optical Cable 1 Meter OM3 Multimode cable

JTOPTICS® 25G SFP28 AOC (Active Optical Cable) is a SFP28 MSA compliant, low power consumption and lightweight solution for 25G high speed interconnect applications over multi-mode fibers. It meets 25G Ethernet, InfiniBand EDR and CPRI/eCPRI protocols and is widely used in data centers, HPC (High-performance computing) and 5G fronthaul applications. The 25G SFP28 AOC cables provide an ideal alternative option to SFP28 direct attach copper cables (DAC) and SFP28 optical transceiver connections of short reach. The 25G SFP28 AOC cables are composed of SFP28 optical transceivers at both ends and OM3 or OM4 multi-mode fiber cable of different cable lengths. Hot-pluggable SFP28 AOC assemblies1x 25G NRZ electrical interface1x 25G NRZ optical interfaceData rate up to 25.78125Gbps per channel.Compliant with SFP28 MSA, 25GBASE-SR Ethernet and InfiniBand EDR850nm VCSEL laser • PIN photodetector. Low power consumption < 1W per end Compliant with InfiniBand QDR Length up to 3..

₹ 4,283.40 Ex Tax: ₹ 3,630.00

JTOPTICS 50G AOC Cable SFP56 to SFP56 Active Optical Cable 1 Meter OM3 Multimode cable

50G SFP56 Active Optical Cables (AOCs) are direct-attach fiber assemblies with SFP56 connectors, compliant with 50G Ethernet IEEE 802.3ba 56GBASE-SR standard. They are suitable for short distances and offer a cost-effective solution to connect within racks and across adjacent racks. The length is up to 70 meters using OM3 MMF. The 50G SFP56 AOC is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 20-contact edge type connector. Hot-pluggable SFP56 form-factor connectorsFull-duplex active optical cables850nm VCSEL array and PIN photo-detector arrayInternal CDR circuits on both receiver and transmitter channelsSupport CDR bypassCompliant with SFP56 MSA and IEEE 802.3cd 50GBASE-SRData rate up to 53.125GbpsPower consumption < 2W per endLength up to 70m (OM3) or 100m (OM4) over MMFOperating case temperature range from 0°C to 70°C3.3V power supply voltageRoHS compliant (lead free)..

₹ 125,516.60 Ex Tax: ₹ 106,370.00

JTOPTICS 800G 16 Fiber Mpo Break-Out Cable With Mpo Female And 8 X Lc/Pc Duplex Om4 Multimode Green Color (Ofnp) Low Loss Plenum Cable

JTOPTICS breakout cable assemblies are composed of high quality OFNP jacketed fiber optic cables used in data center, telecom and backbone application for 400G / 800G connectivity. 16 Fiber MPO harness patch cord assemblies are used to interconnect QSFP-DD and QSFP-DD800 transceivers. QSFP-DD to 8 x SFP-56 and QSFP-DD800 to QSFP-28 with SR8 Transceiver Modules. MPO cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality OFNP jacketed fiber optic cables ..

₹ 8,732.00 Ex Tax: ₹ 7,400.00

JTOPTICS 800G 16 Fiber Mpo Break-Out Cable With Mpo Female And 8 X Lc/Pc Duplex Om5 Multimode Green Color (Ofnp) Low Loss Plenum Cable

JTOPTICS breakout cable assemblies are composed of high quality OFNP jacketed fiber optic cables used in data center, telecom and backbone application for 400G / 800G connectivity. 16 Fiber MPO harness patch cord assemblies are used to interconnect QSFP-DD and QSFP-DD800 transceivers. QSFP-DD to 8 x SFP-56 and QSFP-DD800 to QSFP-28 with SR8 Transceiver Modules. MPO cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality OFNP jacketed fiber optic cables..

₹ 9,912.00 Ex Tax: ₹ 8,400.00

JTOPTICS 800G 16 Fiber Mpo Trunk Cable Mpo Female - Mpo Female Om4 Multimode Pink Color (Ofnp) Low Loss Plenum Cable

JTOPTICS Trunk cable assemblies are composed of high quality OFNP jacketed fiber optic cables used in data center, telecom and backbone application for 400G / 800G connectivity. MPO Trunk Cable are built with highest quality components. 16 Fiber MPO trunk patch cord assemblies are used to interconnect QSFP-DD and QSFP-DD800 SR8 transceivers. MPO cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality OFNP jacketed fiber optic cables ..

₹ 6,608.00 Ex Tax: ₹ 5,600.00

JTOPTICS 800G 16 Fiber Mpo Trunk Cable Mpo Female - Mpo Female Om5 Multimode Green Color (Ofnp) Low Loss Plenum Cable

JTOPTICS Trunk cable assemblies are composed of high quality OFNP jacketed fiber optic cables used in data center, telecom and backbone application for 400G / 800G connectivity. MPO Trunk Cable are built with highest quality components. 16 Fiber MPO trunk patch cord assemblies are used to interconnect QSFP-DD and QSFP-DD800 SR8 transceivers. MPO cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality OFNP jacketed fiber optic cables..

₹ 7,788.00 Ex Tax: ₹ 6,600.00

JTOPTICS High Quality Lc Lc Om4 Mm Dx Ofc Patch Cord, Lc Pc Lc Pc Multimode Om4 Duplex OFNP Plenum 2mm Pink Color Optical Fiber Patch Cable

JTOPTICS OM4 Multimode patch cords are designed for low loss and high spped connectivity in data center applications. They provide flexible interconnection to active equipment, passive optical devices and cross-connects. JTOPTICS patch cords are terminated with standard grade zirconia ferrule connectors which help assure high transmission quality. All cables conform to IEC, EIA TIA or Telcordia standards. ..

₹ 495.60 Ex Tax: ₹ 420.00

JTOPTICS Sc Lc Sm Dx Optical Patch Cord, Sc/Upc Lc/Upc Single Mode Os2 Duplex Lszh 2Mm Optical Fiber Premium Quality Patch Cable

JTOPTICS optical fiber patch cords are designed for low loss telecommunication applications. The patch cords provide flexible interconnection to active equipment, passive optical devices and cross-connects. JTOPTICS Fiber patch cords are terminated with premium grade zirconia ferrule connectors which help assure high transmission quality and low optical power loss, cables are 100% optically tested for insertion loss to ensure high quality. JTOPTICS patch cables adhere to industry standards, including IEC 62005, BS-EN 61754, IEC 61300, and Telcordia GR-326-CORE. Designed for Telecom and Data Center needs, they are available in OM3, OM4, OM5, or OS2 fiber types. Each terminator undergoes meticulous parameter testing to guarantee optimal network performance...

₹ 401.20 Ex Tax: ₹ 340.00

JT MOBILITY Single Phase 32A EV Copper Cable 3x6.0mm and 2x0.7mm2 EV Charging Cable, 5 meter, 5 Core, 15mm Outer Diameter

The JT Mobility electric vehicle copper cables (EV Cables) are meticulously designed to meet international standards, specifically IEC 62893 and in accordance with the EN 50620 standard. JT Mobility offers options of TPU (Thermoplastic Polyurethane) and TPE (Thermoplastic Elastomer) for insulation and outer sheath, providing a balance of high strength and softness properties.The cable sheath is constructed from high-performance materials with characteristics such as weather resistance, high and low-temperature resistance, and rub resistance. Our high-quality oxygen-free copper conductor ensures excellent conductivity, rendering the cable soft, elastic, with a flexible index, and resistant to hardening in low temperatures.These EV cables, tailored for Electric Vehicle conductive charging systems, are suitable for Battery Electric Vehicles, Fuel Cell Vehicles (FCVs), and Hybrid Electric Vehicles (HEVs). They find widespread application in the charging connection between electric vehicles..

₹ 2,773.00 Ex Tax: ₹ 2,350.00

JTOPTICS 100G QSFP28 Transceiver 100GBASE-LR4 QSFP28 1310nm 10km DOM Duplex LC SMF Optical Transceiver Module

JTOPTICS® 100Gb/s transceiver module designed for optical communication applications compliant to 100G 4WDM 10 MSA. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of CWDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de multiplexes a 100Gb/s optical input into 4 channels of CWDM optical signals and then converts them to 4 output channels of electrical data. The high performance cooled CWDM DFB transmitters and high sensitivity PIN receivers provide superior performance for 100 Gigabit Ethernet applications up to 10km.Hot pluggable QSFP28 form factorMax. link length of 10kM over Single mode Fiber.4 x 26Gb/s DFB based CWDM Cooling transmitter.4 channels PIN ROSA.Internal CDR circuits (receiver and transmitter channels)Support CDR bypassTransmission data rate up to 26Gbps per channel.Duplex LC ConnectorComply with IEEE 802.3ba 100GBASE LR4, IEEE 802.3bm, SFF 8665 an..

₹ 43,188.00 Ex Tax: ₹ 36,600.00

JTOPTICS 10G AOC Cable 10GBASE-CR SFP+ Active Optical Cable 1 Meter OM3 Multimode cable

JTOPTICS® SFP+ Active Optical Cable (AOC) is designed to support single channel, high speed data link applications. This cable is a full duplex construction capable of transmitting data at rates up to 10Gb/s and supporting signal transmission at distances between 1m and 100m. It is fully compatible with industry standard SFF-8431 Pluggable (SFP+) interface requirements and performance. 10G SFP+ Active Optical Cables (AOCs) are direct-attach fiber assemblies with SFP+ connectors. They are suitable for short distances and offer a cost-effective solution to connect within racks and across adjacent racks. The length is up to 300 meters using OM3 MMF. SFF-8431 compliant SFP+ form-factor connectors 1x 10G NRZ electrical interface1x 10G NRZ optical interfaceHot-pluggable electrical interface Transmission data rate up to 10.3Gbps  850nm VCSEL laser • PIN photo-detector. Low power consumption < 1W per end Compliant with InfiniBand QDR Length up to..

₹ 2,466.20 Ex Tax: ₹ 2,090.00

JTOPTICS 12f Mpo Female Sm Loopback Cable, 12 Fiber Mpo (F) Connector, Single Mode, Polarity B

MPO Loopback Assemblies are designed for testing of MPO parallel links and for device burn-in. By creating a loop of signal from transmitter to receiver within one MPO plug it forms optical link which allows testing of optical network segment by segment. Our MPO loopback cables are factory pre-terminated, tested and packed along with the test reports. 12 Fiber MPO loopback patch cord assemblies are used to loopback QSFP+/QSFP/PSM4 transceivers. ..

₹ 1,121.00 Ex Tax: ₹ 950.00

JTOPTICS Lc Sc Sm Sx Optical Patch Cord, Sc/Upc Lc/Upc Single Mode Os2 Simplex Lszh 2Mm Optical Fiber Premium Quality Patch Cable

JTOPTICS optical fiber patch cords are designed for low loss telecommunication applications. The patch cords provide flexible interconnection to active equipment, passive optical devices and cross-connects. JTOPTICS Fiber patch cords are terminated with premium grade zirconia ferrule connectors which help assure high transmission quality and low optical power loss, cables are 100% optically tested for insertion loss to ensure high quality. JTOPTICS patch cables adhere to industry standards, including IEC 62005, BS-EN 61754, IEC 61300, and Telcordia GR-326-CORE. Designed for Telecom and Data Center needs, they are available in OM3, OM4, OM5, or OS2 fiber types. Each terminator undergoes meticulous parameter testing to guarantee optimal network performance...

₹ 200.60 Ex Tax: ₹ 170.00

JT MOBILITY Three Phase 32A EV Copper Cable 5x6.0mm and 2x0.7mm2 for EV Charging, 5 meter, 7 Core, 20mm Outer Diameter

The JT Mobility electric vehicle copper cables (EV Cables) are meticulously designed to meet international standards, specifically IEC 62893 and in accordance with the EN 50620 standard. JT Mobility offers options of TPU (Thermoplastic Polyurethane) and TPE (Thermoplastic Elastomer) for insulation and outer sheath, providing a balance of high strength and softness properties.The cable sheath is constructed from high-performance materials with characteristics such as weather resistance, high and low-temperature resistance, and rub resistance. Our high-quality oxygen-free copper conductor ensures excellent conductivity, rendering the cable soft, elastic, with a flexible index, and resistant to hardening in low temperatures.These EV cables, tailored for Electric Vehicle conductive charging systems, are suitable for Battery Electric Vehicles, Fuel Cell Vehicles (FCVs), and Hybrid Electric Vehicles (HEVs). They find widespread application in the charging connection between electric vehicles..

₹ 4,301.10 Ex Tax: ₹ 3,645.00

JTOPTICS 100G QSFP28 Transceiver 100GBASE-ER4 QSFP28 1310nm 40km DOM Duplex LC SMF Optical Transceiver Module

JTOPTICS® 100Gbps transceiver module designed for optical communication applications compliant to 100GBASE-ER4. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data. The high-performance cooled LAN WDM EML transmitters and high sensitivity PIN+SOA receivers provide superior performance for 100Gigabit Ethernet applications up to 40km links and compliant to optical interface with IEEE802.3ba 100GBASE-ER4 requirementsHot-pluggable QSFP28 form factor4 channels full-duplex transceiver module.Max. link length of 10kM over Single mode Fiber.4 X 25/28G LAN-WDM EML Integrated TOSA.4 x PIN+SOA Receiver.Internal CDR circuits (receiver and transmitter channels)Support CDR bypassTran..

₹ 111,592.60 Ex Tax: ₹ 94,570.00

JTOPTICS 12f Mpo Female Mm Loopback Cable, 12 Fiber Mpo (F) Connector, Multimode, Polarity B

MPO Loopback Assemblies are designed for testing of MPO parallel links and for device burn-in. By creating a loop of signal from transmitter to receiver within one MPO plug it forms optical link which allows testing of optical network segment by segment. Our MPO loopback cables are factory pre-terminated, tested and packed along with the test reports. 12 Fiber MPO loopback patch cord assemblies are used to loopback QSFP+/QSFP/PSM4 transceivers ..

₹ 1,062.00 Ex Tax: ₹ 900.00

JTOPTICS Lc Fc Sm Sx Optical Patch Cord, Fc Upc Lc/Upc Single Mode Os2 Simplex Lszh 2Mm Optical Fiber Premium Quality Patch Cable

JTOPTICS optical fiber patch cords are designed for low loss telecommunication applications. The patch cords provide flexible interconnection to active equipment, passive optical devices and cross-connects. JTOPTICS Fiber patch cords are terminated with premium grade zirconia ferrule connectors which help assure high transmission quality and low optical power loss, cables are 100% optically tested for insertion loss to ensure high quality. JTOPTICS patch cables adhere to industry standards, including IEC 62005, BS-EN 61754, IEC 61300, and Telcordia GR-326-CORE. Designed for Telecom and Data Center needs, they are available in OM3, OM4, OM5, or OS2 fiber types. Each terminator undergoes meticulous parameter testing to guarantee optimal network performance...

₹ 200.60 Ex Tax: ₹ 170.00

JT MOBILITY Single Phase 16A EV Copper Cable 3x2.5mm and 2x0.7mm2 EV Charging Cable, 5 meter, 5 Core, 10mm Outer Diameter

The JT Mobility electric vehicle copper cables (EV Cables) are meticulously designed to meet international standards, specifically IEC 62893 and in accordance with the EN 50620 standard. JT Mobility offers options of TPU (Thermoplastic Polyurethane) and TPE (Thermoplastic Elastomer) for insulation and outer sheath, providing a balance of high strength and softness properties.The cable sheath is constructed from high-performance materials with characteristics such as weather resistance, high and low-temperature resistance, and rub resistance. Our high-quality oxygen-free copper conductor ensures excellent conductivity, rendering the cable soft, elastic, with a flexible index, and resistant to hardening in low temperatures.These EV cables, tailored for Electric Vehicle conductive charging systems, are suitable for Battery Electric Vehicles, Fuel Cell Vehicles (FCVs), and Hybrid Electric Vehicles (HEVs). They find widespread application in the charging connection between electric vehicles..

₹ 1,327.50 Ex Tax: ₹ 1,125.00

JTOPTICS 24f Mpo Female Sm Loopback Cable, 24 Fiber Mpo (F) Connector, Single Mode, Yellow, Polarity A

MPO Loopback Assemblies are designed for testing of MPO parallel links and for device burn-in. By creating a loop of signal from transmitter to receiver within one MPO plug it forms optical link which allows testing of optical network segment by segment. Our MPO loopback cables are factory pre-terminated, tested and packed along with the test reports. 24 Fiber MPO loopback patch cord assemblies are used to loopback CFP/CFP+/CXP transceivers. ..

₹ 2,242.00 Ex Tax: ₹ 1,900.00

JTOPTICS 40G QSFP+ Transceiver 40GBASE-SR4 QSFP+ 850nm 150m DOM MTP/MPO-12 MMF Optical Transceiver Module

JTOPTICS® 40GBASE SR4 150m QSFP+ designed for use in 40 Gigabit per second links over multimode fiber. They are compliant with the QSFP+ MSA and IEEE 802.3ba 40GBASE SR4 and breakout to 4 10GBASE SR. Digital diagnostics functions are available via an I2C interface, including Tx and Rx power monitoring. The optical transceiver is compliant per the RoHS 6 Directive 2011/65/EU.40G QSFP+ Transceiver adopts 12 Fibers MTP/MPO Male connectors, reaching a link up to 150m over OM4 MMF (100m over OM3).Four channel full duplex transceiver module Hot Pluggable QSFP+ form factorMaximum link length of 100m on OM3 & 150m on OM4 MMF Maximum power dissipation < 1.5W Reliable VCSEL array technologyBuilt in digital diagnostic functionsCommercial temperature range 0°C to 70°C Single 1x12 MPO receptacleRoHS 6 compliant..

₹ 3,717.00 Ex Tax: ₹ 3,150.00

Track Order