Your shopping cart is empty!
Your shopping cart is empty!
JTOPTICS Fiber Optical Attenuator is used in fiber optic communications to reduce optical fiber power at a certain level. The most commonly used type is female to male plug type fiber optic attenuator, and it has male fiber Connector at one side and the other side is a female type fiber optic adapter. attenuators mainly used in fiber optic to debug optical power performance & optical instrument calibration correction & fiber signal attenuation to ensure the optical power in a stable and desired level in the link without any changes on its original transmission wave.Flat response over all wavelengthsEnvironmentally stableBellcore / RoSH CompliantPlug-in type packageAccurate attenuationUltra-low back reflectionBroad wavelength bandFlat response over all wavelengthsEnvironmentally stable..
₹ 519.20 Ex Tax: ₹ 440.00
JTOPTICS MPO trunk patch cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. MPO trunk type is for 40G QSFP+ SR4/CSR4, 100G QSFP28 SR4/PSM4, 400G SR4/DR4, optics direct connection and high-density data center applications. MPO cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables..
₹ 5,428.00 Ex Tax: ₹ 4,600.00
JTOPTICS uniboot LC-LC Fiber patch cable is constructed with advanced flat clip Uniboot LC connectors, specifically tailored for high-density data center settings, as seen in UHD series products. Its streamlined design reduces bulk fiber optic cabling by 50% compared to traditional duplex cables, featuring a thinner body. The cable employs a unique "round duplex" design, enabling duplex transmission within a single 2mm cable. These characteristics enhance airflow and visibility in high-density network environments. ..
₹ 542.80 Ex Tax: ₹ 460.00
JTOPTICS optical fiber patch cords are designed for low loss telecommunication applications. The patch cords provide flexible interconnection to active equipment, passive optical devices and cross-connects. JTOPTICS Fiber patch cords are terminated with premium grade zirconia ferrule connectors which help assure high transmission quality and low optical power loss, cables are 100% optically tested for insertion loss to ensure high quality. JTOPTICS patch cables adhere to industry standards, including IEC 62005, BS-EN 61754, IEC 61300, and Telcordia GR-326-CORE. Designed for Telecom and Data Center needs, they are available in OM3, OM4, OM5, or OS2 fiber types. Each terminator undergoes meticulous parameter testing to guarantee optimal network performance...
₹ 448.40 Ex Tax: ₹ 380.00
JTOPTICS 2X12F MPO Cassette Modules are fitted with 2 nos of 12 Fibers SM breakout cable and have LC adapters on the front side and MPO Adaptor at the rear. This cassette is made into smaller size and can be deployed in an ODF. JTOPTICS MPO Cassette Modules reduce the overall cost and setup time for complex high density networking used in data center application.High density pre-terminated fiber optic systemComplied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942Aluminum alloy shell protect the inner fibers effectivelyHigh-quality MPO connectors and guaranteed by 3D interferometerSmall Design and Compatible with HD Fiber Enclosures..
₹ 6,372.00 Ex Tax: ₹ 5,400.00
The JT Mobility Type 2 IEC 62196-2 Smart portable chargers offer convenient on-the-go charging from all types of sockets, including standard outlets. These chargers effectively and accurately charge all Electric Vehicles (EVs) manufactured based on the Type-2 standard (Europe/India), ensuring a high level of compatibility. Equipped with protective elements, these chargers prioritize the complete safety of both the car and the charging unit.Enhanced by a TPU sheath cable, these chargers improve bending life and wear resistance, ensuring durability and reliability over time. The robust shell effectively insulates against water, thereby enhancing safety levels, even in adverse weather conditions or special circumstances.The Type-2 IEC 62196-2 Portable EV Charger features a compact and modularized design tailored to fit various EV interfaces. With an overheating protection mechanism and an IP66/CEE enclosure rating suitable for outdoor use, this EV portable charger provides a secure and ef..
₹ 25,725.00 Ex Tax: ₹ 24,500.00
JTOPTICS 200G QSFP28-DD Breakout DAC cables include 200G QSFP-DD to 2x100G QSFP28 breakout copper cables and 200G QSFP-DD to 8x 25G SFP28 Passive Direct Attach Copper Breakout Cables. It splits the QSFP28-DD port of 200G signal (8x 25G-NRZ) into two QSFP28 ports of 100G signal (4x 25G-NRZ), or eight SFP28 ports of 25G signal (25G-NRZ). The 200G QSFP-DD breakout DAC splitter cables are high-speed, cost-effective alternatives to fiber optics in 200Gb/s Ethernet applications. The passive DAC uses simply copper wires and have no electronics, zero power consumption, and minimal latency and insertion losses. It also enables higher port bandwidth, density and configurability at low cost and reduced power requirement of data centers.Hot-pluggable QSFP-DD DAC cable assemblies8x 25G NRZ electrical interfaceData rate up to 25.78125Gbps per channel.Compliant with QSFP-DD MSA, CMIS and IEEE 802.3Low power consumptionCommercial case operating temp. rangeSingle 3.3V power supplyRoHS compliant (lead f..
₹ 10,007.58 Ex Tax: ₹ 8,481.00
JTOPTICS 200G QSFP56 Breakout DAC cables include 200G QSFP56 to 4x50G SFP56 breakout copper cables and 200G QSFP56 to 2x 100G SFP56 Passive Direct Attach copper breakout cables. It splits a QSFP56 port with 200GE/200G HDR signal (4x 50G-PAM4) into four SFP56 ports with 50G signal (50G-PAM4). The 200G QSFP56 breakout DAC splitter cables are high-speed, cost-effective alternatives to fiber optics in 200Gb/s Ethernet and InfiniBand HDR applications. The passive DAC uses simply copper wires and have no electronics, zero power consumption, and have the lowest latency and insertion losses. It also enables higher port bandwidth, density and configurability at low cost and reduced power requirements in the data centers. Hot-pluggable QSFP56/SFP56 form factor Data rate up to 212.5Gbps QSFP56/SFP56 MSA compliant4x 53Gb/s PAM4 modulationQSFP56 MSA compliantOperating case temperature of 0-70°CSingle 3.3V supply voltageBit Error Rate (BER) better than 1E-15RoHS compliantSFF-8636 comp..
₹ 10,006.40 Ex Tax: ₹ 8,480.00
JTOPTICS QSFP56 passive copper cable assembly feature eight differential copper pairs, providing four data transmission channels at speeds up to 56Gbps (PAM4) per channel, and meets 200G Ethernet and InfiniBand Enhanced Data Rate (EDR) requirements. Available in a broad range of wire gages-from 26AWG through 30AWG-this 200G copper cable assembly features low insertion loss and low cross talk. QSFP56 uses PAM4 signals for transmission, which doubles the rate. However, there are more stringent requirements for cable insertion loss. For detailed requirements, please see High Speed Characteristics. 200G QSFP56 DAC cables are suitable for very short links and offer a cost-effective way to establish a 200-Gigabit link between QSFP-200G ports of switches/routers within racks and across adjacent racks.Hot-pluggable QSFP56 form factorData rate up to 212.5Gbps4x 53Gb/s PAM4 modulationQSFP56 MSA compliantOperating case temperature of 0-70°CSingle 3.3V supply voltageBit Error Rate (BER) bette..
₹ 6,796.80 Ex Tax: ₹ 5,760.00
JTOPTICS MPO pre-terminated Trunk Cables are designed for high density application which offers excellent benefits in terms on-site installation time and space saving. The trunk cable assemblies are composed of high quality LSZH jacketed fiber optic cables used in data center, telecom and backbone application for 100G, 400G & 800G connectivity. MPO cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables..
₹ 3,964.80 Ex Tax: ₹ 3,360.00
JTOPTICS® 400G QSFP-DD Breakout AOC (Active Optical Cable) assemblies include 400G QSFP-DD to 4x 100G QSFP56 breakout AOC. The module integrates eight parallel lanes on 400G end and fan-out to four parallel lanes on each 100G end. Each lane operate 53.125Gb/ps PAM4 modulation signal. These 400G parallel breakout Active Optical Cable (AOC) assemblies transmit parallel 8x 50G PAM4 signals over multi-mode fiber (MMF) cables up to 100m. Compliant with QSFP-DD/SFP MSA and CMIS 4.0. they are designed with high performance, high density and low power, which are suitable for short range interconnection for data center, high-performance computing networks,Hot-pluggable QSFP-DD/QSFP28 form factor full-duplex transceiver assembly8-channels 850nm VCSEL array and PIN photo-detector arrayData rate up to 53.125Gbps (26.5625GBd PAM4) per channel400GAUI-8 and 100GAUI-2 electrical interfacesCompliant with QSFP-DD MSA, CMIS 4.0 and IEEE 802.3cm 400GBASE-SR8Compliant with InfiniBand HDR/HDR100MMF cable wi..
₹ 124,431.00 Ex Tax: ₹ 105,450.00
JTOPTICS 400G QSFP-DD DAC (Passive Direct Attach Copper) enables high-bandwidth 400G links and supports 400G Ethernet rate. It is high-speed, cost-effective alternatives to fiber optics in 400G Ethernet applications. The 400G QSFP-DD DAC cable contains 16 high-speed copper pairs, each operating at data rates of up to 53Gb/s, which are suitable for very short links and offer a cost-effective and power-efficient way to establish a 400-Gigabit link between QSFP-400G ports of switches/routers within racks and across adjacent racks. They enable higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers. Hot-pluggable QSFP-DD form factor Data rate up to 425Gbps.8x 53Gb/s PAM4 modulation QSFP-DD MSA, CMIS and IEEE 802.3 compliant Operating case temperature of 0-70℃ Copper link length up to 3m Single 3.3V supply voltage Bit Error Rate (BER) better than 1E-15 RoHS compliantData rate up to 53.125Gbps ..
₹ 15,894.60 Ex Tax: ₹ 13,470.00
JTOPTICS® 400Gb/s FR4 transceiver module is designed for high speed, long range 400 Gigabit Ethernet applications of up to 400 gigabits per second. The JT QSFP 400G FR4 is offered with optical LC Duplex Connector. This module utilizes the 400GBASE FR4 technology for transmission. With this transceiver, two Ethernet switches can be connected through two single mode fiber cores. The JT QSFPDD 400G FR4 supports a transmission distance of up to 2 kilometers. It is compliant to IEEE 802.3bs, 400GBASE FR4 Spec of 100G Lambda MSA group, and 400GAUI 8/CEI 56G VSR PAM4 standards.4 channels full duplex transceiver modulesTransmission data rate up to 100Gbps per channel4x100Gbps PAM4 transmitter and PAM4 receiverCompliant with IEEE 802.3bs standard4 channels 1310nm EML arrayInternal CDR circuits on both receiver and transmitterPower consumption < 10WReach up to 2 Km SMFLC connector receptacleBuilt in digital diagnostic functionsOperating case temperature range 0°C to +70°C3.3V power supp..
₹ 111,864.00 Ex Tax: ₹ 94,800.00
JTOPTICS Optical adaptor uses zirconia or Phosphor Bronze sleeve used for high precision alignment for reliability and improved reconnect ability and complied to Bell core GR-326 performance requirement. We adopt high quality raw materials and make these fiber optic adapters strictly according to international standard, this makes our fiber optic adapters fully compatible with the products from other manufacturers' in the market.Complies with IEC 61754-15High precision alignment sleeveLow insertion loss and high reconnect abilityRoHS, REACH SvHC compliant ..
₹ 141.60 Ex Tax: ₹ 120.00
JTOPTICS Gigabit Ethernet to single fiber converter can convert and transmit Gigabit Ethernet networks into Gigabit fiber optic networks on single fiber, it is used in Gigabit Ethernet as copper to fiber conversion equipment. Each Media Converter provides a 10/100/1000BaseT/TX auto-negotiating RJ-45 twisted-pair connector port with Auto-MDIX capability for more convenient connection. Built-in 10/100/1000 switch enables the fiber able connection to operate at 1000 Mbps connected to either a 10BaseT or 100BaseTX or 1000BaseTX network, while remaining completely 1000BaseFX standard-compliant.10/100/1000Mbps auto-negotiationIEEE 802.3x full-duplex flow control and back pressure half-duplex flow controlSupports MAC self-learningStandards: Complied with IEEE802.3 10Base-T, IEEE802.3u 100Base-T IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-FX ..
₹ 2,832.00 Ex Tax: ₹ 2,400.00
JTOPTICS Optical adaptor uses zirconia or Phosphor Bronze sleeve used for high precision alignment for reliability and improved reconnect ability and complied to Bell core GR-326 performance requirement. We adopt high quality raw materials and make these fiber optic adapters strictly according to international standard, this makes our fiber optic adapters fully compatible with the products from other manufacturers' in the market.Complies with IEC 61754-15High precision alignment sleeveLow insertion loss and high reconnect abilityRoHS, REACH SvHC compliant ..
₹ 106.20 Ex Tax: ₹ 90.00
JTOPTICS Optical adaptor uses zirconia or Phosphor Bronze sleeve used for high precision alignment for reliability and improved reconnect ability and complied to Bell core GR-326 performance requirement. We adopt high quality raw materials and make these fiber optic adapters strictly according to international standard, this makes our fiber optic adapters fully compatible with the products from other manufacturers' in the market.Complies with IEC 61754-15High precision alignment sleeveLow insertion loss and high reconnect abilityRoHS, REACH SvHC compliant ..
₹ 53.10 Ex Tax: ₹ 45.00
JTOPTICS Optical adaptor uses zirconia or Phosphor Bronze sleeve used for high precision alignment for reliability and improved reconnect ability and complied to Bell core GR-326 performance requirement. We adopt high quality raw materials and make these fiber optic adapters strictly according to international standard, this makes our fiber optic adapters fully compatible with the products from other manufacturers' in the market.Complies with IEC 61754-15High precision alignment sleeveLow insertion loss and high reconnect abilityRoHS, REACH SvHC compliant ..
₹ 106.20 Ex Tax: ₹ 90.00
JTOPTICS Optical adaptor uses zirconia or Phosphor Bronze sleeve used for high precision alignment for reliability and improved reconnect ability and complied to Bell core GR-326 performance requirement. We adopt high quality raw materials and make these fiber optic adapters strictly according to international standard, this makes our fiber optic adapters fully compatible with the products from other manufacturers' in the market.Complies with IEC 61754-15High precision alignment sleeveLow insertion loss and high reconnect abilityRoHS, REACH SvHC compliant ..
₹ 53.10 Ex Tax: ₹ 45.00
JTOPTICS uniboot LC connector featuring the Push–Pull Tab is a connector is distinctive design enables easy polarity switching without the need for any tools. The Push/Pull Tab is ergonomically designed, making it effortless to insert and pull out from the LC adapter. An additional innovative feature is the removable tab after insertion, streamlining the installation process and enhancing overall efficiency...
₹ 519.20 Ex Tax: ₹ 440.00
JTOPTICS optical fiber patch cords are designed for low loss telecommunication applications. The patch cords provide flexible interconnection to active equipment, passive optical devices and cross-connects. JTOPTICS Fiber patch cords are terminated with premium grade zirconia ferrule connectors which help assure high transmission quality and low optical power loss, cables are 100% optically tested for insertion loss to ensure high quality. JTOPTICS patch cables adhere to industry standards, including IEC 62005, BS-EN 61754, IEC 61300, and Telcordia GR-326-CORE. Designed for Telecom and Data Center needs, they are available in OM3, OM4, OM5, or OS2 fiber types. Each terminator undergoes meticulous parameter testing to guarantee optimal network performance...
₹ 224.20 Ex Tax: ₹ 190.00
JTOPTICS MPO adapter works for any MTP / MPO Connector from 4 fiber to 72 fiber. Widely used in trunk cabling and cassettes, this adapter meets appropriate standards and is perfect for your parallel optics and MTP Adapter needs. MPO Adapter body is made of Poly ethermide, the spring clip is made of stainless steel, and the dust cap is made of polycarbonate.Complies with IEC 61754-15High precision alignment sleeveLow insertion loss and high reconnect abilityRoHS, REACH SvHC compliant ..
₹ 767.00 Ex Tax: ₹ 650.00
JTOPTICS 2X12F MPO Cassette Modules are fitted with 2 nos of 12 Fibers MM breakout cable and have LC adapters on the front side and MPO Adaptor at the rear. This cassette is made into smaller size and can be deployed in an ODF. JTOPTICS MPO Cassette Modules reduce the overall cost and setup time for complex high density networking used in data center application. High density pre-terminated fiber optic systemComplied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942Aluminum alloy shell protect the inner fibers effectivelyHigh-quality MPO connectors and guaranteed by 3D interferometerSmall Design and Compatible with HD Fiber Enclosures..
₹ 6,608.00 Ex Tax: ₹ 5,600.00
JTOPTICS Optical adaptor uses zirconia or Phosphor Bronze sleeve used for high precision alignment for reliability and improved reconnect ability and complied to Bell core GR-326 performance requirement. We adopt high quality raw materials and make these fiber optic adapters strictly according to international standard, this makes our fiber optic adapters fully compatible with the products from other manufacturers' in the market.Complies with IEC 61754-15High precision alignment sleeveLow insertion loss and high reconnect abilityRoHS, REACH SvHC compliant ..
₹ 141.60 Ex Tax: ₹ 120.00
