Your shopping cart is empty!
Your shopping cart is empty!
JTOPTICS®-1000BASE-SR-500m-SFPP-optical-transceiver,-1G-SFP-SR-(JT-1G-SFP-DD-SR)-SFP-transceiver-supports-up-to-500m-link-lengths-over-OM4-MMF-(300m-over-OM3-MMF)-via-an-LC-duplex-connector.-Digital-diagnostics-monitoring-is-available-via-a-2-wire-serial-interface,-as-specified-in-SFF-8472.-Each-SFP-transceiver-module-is-individually-tested-to-be-used-on-a-series-of-Cisco-switches,-routers,-servers,-network-interface-card-(NICs)-etc.Full-duplex-transceiver-moduleHot-pluggable-SFP-form-factorCompliant-with-SFP-MSA-standardVCSEL-transmitter-and-PIN-receiverData-rate-up-to-1.1GbpsCompliant-with-CPRI-specificationMaximum-link-length-of-500mLow-power-dissipationOperating-case-temperature-range-Commercial-or-IndustrialSingle-3.3V-power-supplyRoHS-6-compliant-(lead-free)..
₹ 708.00 Ex Tax: ₹ 600.00
JTOPTICS MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 100G / 400G /800G connectivity. 24 fiber MPO to LC Fan out Assemblies provide connections between single CFP/CXP (100G transceiver with MPO interface) and 10 x SFP+ (10G transceivers with LC Duplex Interface). JTOPTICS MPO harness cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables..
₹ 8,732.00 Ex Tax: ₹ 7,400.00
JTOPTICS Outdoor Cable Assembly-Waterproof Series Designed for harsh environment, our outdoor FTTA Patch Cord is made of waterproof housing, which fulfills IP67/IP68 environmental sealing requirements. LC UPC duplex connectors, the cable features superior crush resistance and a high degree of flexibility with the armored tube. Furthermore, the cable features a flame retardant LSZH jacket which is UV stabilized and highly resistant to chemicals commonly found in industrial environments, also suitable for both indoor and outdoor industrial installations. As 5G becomes increasingly present in our lives, the fiber between the radio units and baseband units will see an increase in traffic, which raises higher requirements for today's fiber bandwidth. CPRI and eCPRI are likely to play a prominent role in 5G networks to solve such types of problems. eCPRI is more suitable than CPRI in 5G fronthaul. ..
₹ 3,929.40 Ex Tax: ₹ 3,330.00
The JT Mobility holder facilitates the organized storage of your Type 1 female (Electric Vehicle end) plug near the home charging station or charger when not in use. This product is engineered for enhanced strength, anti-aging properties, environmental friendliness, and being halogen-free. It exhibits increased resistance to bending, resulting in a longer service life.Designed by JT Mobility's skilled engineers, the IEC Dummy socket is tailored to real-world usage scenarios. The EVSE plug holder is meticulously crafted to safeguard core contacts, offering a high carrying capacity and a long mechanical life.Upon completing the charging process and disconnecting the cable from the car, it is advisable to store the cable in a warm and dry place for 24 hours to promote longevity. Therefore, the dummy socket provides the ideal means to keep your cable organized and well-maintained.Type-1 AC Dummy Socket Holder for SAE J1772 Type 1 EV PlugAnti-flaming materialPressure-resistant, abrasion res..
₹ 1,180.00 Ex Tax: ₹ 1,000.00
JTOPTICS MTP® trunk patch cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. MTP® trunk type is for 40G QSFP+ SR4/CSR4, 100G QSFP28 SR4/PSM4, 400G SR4/DR4, optics direct connection and high-density data center applications. MTP® cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables..
₹ 3,374.80 Ex Tax: ₹ 2,860.00
JTOPTICS® 1GBASE BD LR 20Km SFP optical transceiver, 1G SFP BD LR(JT 1G SFP BD LR) Bidirectional SFP transceiver is intended mainly for connecting high speed hubs, Ethernet switches, and routers together in different wiring closets or buildings using long cabling runs and developed to support longer length on fiber backbones. BIDI Transceiver used only one fiber to transmit and receive optical signal.It is mainly used in different applications such as router,media converter,switched backlane applications. Dual data rate of 1.25Gbps operation;1310nm FP laser and PIN photo detector for 20km Compliant with SFP MSA and SFF 8472 Duplex LC receptacle;Digital Diagnostic MonitoringInternal Compatible with SONET OC 24 LR 1Complied with RoHS..
₹ 1,699.20 Ex Tax: ₹ 1,440.00
JTOPTICS® 1Gb/s (JT 1G SFP RJ) Copper Small Form Pluggable (SFP) transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE T standards as specified in IEEE 802. 3 2002 and IEEE 802.3ab, which supporting 1000Mbps data rate up to 100 meters reach over unshielded twisted pair category 5 cable.The module supports 1000 Mbps full duplex data links with 5 level Pulse Amplitude Modulation (PAM) signals. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.Support 1000BASE T Operation in Host SystemsSupport RX_LOS as Link indication For 100m Reach Over UTP Cat 5/5e/6Cable Hot Pluggable SFP FootprintFully Metallic Enclosure for low EMILow Power Dissipation (1.05W Typical) Compact RJ 45 ConnectorAccess to Physical Layer IC via 2 Wire Serial Bus Com..
₹ 1,354.64 Ex Tax: ₹ 1,148.00
JTOPTICS MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 100G / 400G /800G connectivity. 24 fiber MPO to LC Fan out Assemblies provide connections between single CFP/CXP (100G transceiver with MPO interface) and 10 x SFP+ (10G transceivers with LC Duplex Interface). JTOPTICS MPO harness cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables..
₹ 8,260.00 Ex Tax: ₹ 7,000.00
The JT Mobility Type 2 AC Female electric car plug is purposefully crafted to facilitate the creation of a personalized EV charger. This involves selecting the desired cable length and connectors. The connector adheres to the IEC 62196-2 standard. The EV Connector gun is provided as a component, inclusive of the correct resistance required for assembly.It's essential to note that this offering does not constitute a complete charging cable. Instead, the components provided here serve as the building blocks for assembling a complete Type 2 charging cable. This Type 2 female plug, coupled with a 16A/32A single/three-phase cable, is specifically suitable for self-built Mode 2 and Mode 3 charging cables.Type 2 IEC 62196-2 Female 16A Single Phase EV PlugPlug in/pull out >10000 times.Comply to IEC 62196-1: 2014; IEC 62196-2:2017; CE Standards.Body is made with High Grade ABS and Thermoplastic MaterialRated with IP55 (working condition).Anti-flaming, pressure-resistant, impact resistance ma..
₹ 3,776.00 Ex Tax: ₹ 3,200.00
JTOPTICS® SFPP 10GBASE LR SFP+ transceiver supports up to 10km link lengths over LC duplex SMF fiber. Digital diagnostics monitoring is available via a 2 wire serial interface, as specified in SFF 8472. Each SFP+ transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface card (NICs) etc. Featuring low power consumption, high speed, this 10G SFP+ transceiver is ideal for data center, enterprise wiring closet, service provider transport application, Radio & Baseband Unit, etc.Operating Data Rate up to 1.25Gbps1550nm DFB Laser Transmitter40km with 9/125 µm SMFSingle 3.3V Power SupplyHot Pluggable SFP FootprintDuplex LC Connector InterfaceCompliant with MSA SFP SpecificationCompliant with SFF 8472..
₹ 1,923.40 Ex Tax: ₹ 1,630.00
JTOPTICS® 1Gb/s transceiver module supports up to 20km link lengths over LC duplex SMF fiber. Featuring low power consumption, the hot swappable 1G SFP transceiver is ideal for Internet Service Provider (ISP) Gigabit Ethernet communication links, Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks and other optical links. Featuring low power consumption, high speed, this 10G SFP+ transceiver is ideal for data center, enterprise wiring closet, service provider transport application, Radio & Baseband Unit, etc.Dual data rate of 1.25Gbps/1.063Gbps operation1310nm FP laser and PIN photo detector for 20km Compliant with SFP MSA and SFF 8472 with duplex LC receptacleComplied with RoHS20km with 9/125 µm SMFHot Pluggable SFP Footprint Duplex LC Connector InterfaceSingle 3.3V Power SupplyClass 1 FDA and IEC60825 1 Laser Safety Compliant..
₹ 708.00 Ex Tax: ₹ 600.00
JTOPTICS MTP® breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MTP® harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 100G / 400G /800G connectivity. 24 fiber MTP® to LC Fan out Assemblies provide connections between single CFP/CXP (100G transceiver with MTP® interface) and 10 x SFP+ (10G transceivers with LC Duplex Interface). JTOPTICS MTP® harness cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality coMTP®nents of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are coMTP®sed of high quality LSZH/OFNP jacketed fiber optic cables..
₹ 10,431.20 Ex Tax: ₹ 8,840.00
JTOPTICS OM3 Multimode patch cords are designed for low loss data center applications. They provide flexible interconnection to active equipment, passive optical devices and cross-connects. JTOPTICS patch cords are terminated with standard grade zirconia ferrule connectors which help assure high transmission quality. All cables conform to IEC, EIA TIA or Telcordia standards. ..
₹ 413.00 Ex Tax: ₹ 350.00
The JT Mobility Type 2 AC Female electric car plug is purposefully crafted to facilitate the creation of a personalized EV charger. This involves selecting the desired cable length and connectors. The connector adheres to the IEC 62196-2 standard. The EV Connector gun is provided as a component, inclusive of the correct resistance required for assembly.It's essential to note that this offering does not constitute a complete charging cable. Instead, the components provided here serve as the building blocks for assembling a complete Type 2 charging cable. This Type 2 female plug, coupled with a 16A/32A single/three-phase cable, is specifically suitable for self-built Mode 2 and Mode 3 charging cables.Type 2 IEC 62196-2 Female 16A Three Phase EV PlugPlug in/pull out >10000 times.Comply to IEC 62196-1: 2014; IEC 62196-2:2017; CE Standards.Body is made with High Grade ABS and Thermoplastic MaterialRated with IP55 (working condition).Anti-flaming, pressure-resistant, impact resistance mat..
₹ 4,012.00 Ex Tax: ₹ 3,400.00
JTOPTICS MTP® breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MTP® harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 40G / 100G /200G/ 400G connectivity. 8/12 Fiber MTP® Fanout Assemblies provide connections between QSFP+ to 4 x SFP+, QSFP28 to 4 x SFP28 and QSFP-DD to 4 x QSFP-28 Transceiver Modules. JTOPTICS MTP® harness cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables..
₹ 5,369.00 Ex Tax: ₹ 4,550.00
JTOPTICS® 1GBASE SX SFP transceivers s are small form factor pluggable module for bi directional serial optical data communications such as Gigabit Ethernet 1000BASE SX and Fiber Channel FC PH 2 for 100 M5 SN 1 and 100 M6 SN 1. . It is with the SFP 20 pin connector to allow hot plug capability.This module is designed for multi mode fiber and operates at a nominal wavelength of 850nm. Operating Data Rate up to 1.25Gbps850nm VCSEL Laser Transmitter550m with 50/125µm MMF300m on 62.5/125µm MMFHot Pluggable SFP Footprint Duplex LC Connector InterfaceSingle 3.3V Power SupplyCompliant with MSA SFP Specification..
₹ 2,242.00 Ex Tax: ₹ 1,900.00
JTOPTICS OM3 Multimode patch cords are designed for low loss data center applications. They provide flexible interconnection to active equipment, passive optical devices and cross-connects. JTOPTICS patch cords are terminated with standard grade zirconia ferrule connectors which help assure high transmission quality. All cables conform to IEC, EIA TIA or Telcordia standards. ..
₹ 413.00 Ex Tax: ₹ 350.00
The JT Mobility Type 2 AC Female electric car plug is purposefully crafted to facilitate the creation of a personalized EV charger. This involves selecting the desired cable length and connectors. The connector adheres to the IEC 62196-2 standard. The EV Connector gun is provided as a component, inclusive of the correct resistance required for assembly.It's essential to note that this offering does not constitute a complete charging cable. Instead, the components provided here serve as the building blocks for assembling a complete Type 2 charging cable. This Type 2 female plug, coupled with a 16A/32A single/three-phase cable, is specifically suitable for self-built Mode 2 and Mode 3 charging cables.Type 2 IEC 62196-2 Female 32A Single Phase EV PlugPlug in/pull out >10000 times.Comply to IEC 62196-1: 2014; IEC 62196-2:2017; CE Standards.Body is made with High Grade ABS and Thermoplastic MaterialRated with IP55 (working condition).Anti-flaming, pressure-resistant, impact resistance ma..
₹ 3,776.00 Ex Tax: ₹ 3,200.00
JTOPTICS MTP® breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MTP® harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 40G / 100G /200G/ 400G connectivity. 8/12 Fiber MTP® Fanout Assemblies provide connections between QSFP+ to 4 x SFP+, QSFP28 to 4 x SFP28 and QSFP-DD to 4 x QSFP-28 Transceiver Modules. JTOPTICS MTP® harness cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables...
₹ 5,522.40 Ex Tax: ₹ 4,680.00
JTOPTICS OM3 Multimode patch cords are designed for low loss data center applications. They provide flexible interconnection to active equipment, passive optical devices and cross-connects. JTOPTICS patch cords are terminated with standard grade zirconia ferrule connectors which help assure high transmission quality. All cables conform to IEC, EIA TIA or Telcordia standards. ..
₹ 413.00 Ex Tax: ₹ 350.00
The JT Mobility Type 2 AC Female electric car plug is purposefully crafted to facilitate the creation of a personalized EV charger. This involves selecting the desired cable length and connectors. The connector adheres to the IEC 62196-2 standard. The EV Connector gun is provided as a component, inclusive of the correct resistance required for assembly.It's essential to note that this offering does not constitute a complete charging cable. Instead, the components provided here serve as the building blocks for assembling a complete Type 2 charging cable. This Type 2 female plug, coupled with a 16A/32A single/three-phase cable, is specifically suitable for self-built Mode 2 and Mode 3 charging cables.Type 2 IEC 62196-2 Female 32A Three Phase EV PlugPlug in/pull out >10000 times.Comply to IEC 62196-1: 2014; IEC 62196-2:2017; CE Standards.Body is made with High Grade ABS and Thermoplastic MaterialRated with IP55 (working condition).Anti-flaming, pressure-resistant, impact resistance mat..
₹ 4,012.00 Ex Tax: ₹ 3,400.00
JTOPTICS MTP® breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MTP® harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 40G / 100G /200G/ 400G connectivity. 8/12 Fiber MTP® Fanout Assemblies provide connections between QSFP+ to 4 x SFP+, QSFP28 to 4 x SFP28 and QSFP-DD to 4 x QSFP-28 Transceiver Modules. JTOPTICS MTP® harness cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables..
₹ 5,215.60 Ex Tax: ₹ 4,420.00
JTOPTICS® Horizontal Cable Management Panels with D Rings are built with steel for strength and durability. Easily route large amounts of cable horizontally and vertically through robust rings. The D-Ring provides a creative solution for adding individual D-Ring to a rack or on a wall using appropriate fasteners. ..
₹ 1,062.00 Ex Tax: ₹ 900.00
JTOPTICS OM4 Multimode patch cords are designed for low loss and high spped connectivity in data center applications. They provide flexible interconnection to active equipment, passive optical devices and cross-connects. JTOPTICS patch cords are terminated with standard grade zirconia ferrule connectors which help assure high transmission quality. All cables conform to IEC, EIA TIA or Telcordia standards. ..
₹ 448.40 Ex Tax: ₹ 380.00
