Certified Quality
Our quality policy is maintained throughout our business in accordance with our commitment to customer and regulatory requirements.
VGA to Fiber Optics Transmitter/Receiver digitally transmits high-resolution VGA/RGB (up to WXGA) and stereo audio over one single-core fiber, single-mode, 1310 nm wavelength. Ideal for point-to-point, point-to-multipoint and drop-and-repeat applications, it supports VGA, SVGA, XGA and WXGA (640 x 480, 1024*768, and 1280*1024, up to 1366 x 768) or RGBHV format.
| FEATURES | • Audio Channel: 1 channel bidirectional stereo Audio • Video Channel: 1 channel Unidirectional • Transmission Distance:10km • Fiber Type: Single-mode Simplex • CRAFT: uncompressed technology • Highest resolution: 1920x1080@60 |
| APPLICATIONS | • CCTV • Video Transmission • Video monitor • CATV |
| SPECIFICATIONS | |
| Connector | Standard 3.5 mm stereo headphone jack |
| Number of Channels | 1-channel |
| Video type | RGB with single and sync H, V |
| Data Rate | 2.50 |
| Wavelength | 1310nm |
| Bandwidth Rating | 300MHz |
| Input level | 0.7Vp-p |
| Bit width | 10bit |
| Compatibility | Using PS2 to USB cable, it works fine |
| Weighted signal-to-noise ratio | ≥90 dB |
| Resolution | Max1080P@60Hz |
| Interface | DB-15 |
| Output level | 0.7Vp-p |
| Fiber optic | Single-mode, 10Km |
| Max. link loss | 12dB（option） |
| Receiver Sensitivity | ≥20dBm |
| Signal level | RS232 standard level |
| Signal-to-Noise Ratio(SNR) | ≥115200bps |
| Total harmonic distortion | ≤1% |
| Audio coding | 24bit |
| Input/output Impedance | 600Ω or 100KΩ |
| Input/output interface | Terminal block |
