Your shopping cart is empty!
Your shopping cart is empty!
JT Mobility's Combined Charging System (CCS) is grounded in open and universal standards tailored for electric vehicles. The CCS seamlessly integrates single-phase and rapid three-phase charging utilizing alternating current, with a maximum capacity of 43 kilowatts (kW). Additionally, it supports direct-current charging with a maximum capacity of 200 kW, with future compatibility projected to reach up to 350 kW – all within a singular system. This comprehensive approach addresses all essential charging requirements.The Combo CCS2 charging connectors are available in a range from 60A to 200A. They incorporate both alternating current (AC) Type 2 charging and direct current (DC) CCS fast charge capabilities in a single inlet, catering to the vehicle side of the charging process.80A-200A CCS2 Male Inlet Socket, 1000V DC CCS Type 2 IEC 62196-3 with 0.5-meter cable.IP55 RatedUnique Integrated DesignMounted on the side of the vehicle/EVSE.High strength flame retardant nylonPin Material: Copp..
₹ 18,939.00 Ex Tax: ₹ 16,050.00
JT Mobility's Combined Charging System (CCS) is grounded in open and universal standards tailored for electric vehicles. The CCS seamlessly integrates single-phase and rapid three-phase charging utilizing alternating current, with a maximum capacity of 43 kilowatts (kW). Additionally, it supports direct-current charging with a maximum capacity of 200 kW, with future compatibility projected to reach up to 350 kW – all within a singular system. This comprehensive approach addresses all essential charging requirements.The Combo CCS2 charging connectors are available in a range from 60A to 200A. They incorporate both alternating current (AC) Type 2 charging and direct current (DC) CCS fast charge capabilities in a single inlet, catering to the vehicle side of the charging process.CCS2 Car EV Male Inlet Socket, 1000V DC CCS Type 2 IEC 62196-3, 0.5-meter cable and locking actuator.IP55 RatedUnique Integrated DesignMounted on the side of the vehicle/EVSE.High strength flame retardant nylonPin..
₹ 27,730.00 Ex Tax: ₹ 23,500.00
JTOPTICS®-10Gb/s-(JT-10G-SFPP-RJ)-standards-as-specified-in-IEEE-Std-802.3.-10GBASE-T-SFP+-copper-transceivers-use-the-SFP's-RX_LOS-pin-for-link-indication.-If-pull-up-SFP's-TX_DISABLE-pin,-PHY-GBASE-T-SFP+-copper-transceivers-are-based-on-the-SFP-Multi-Source-Agreement-(MSA).-They-are-compatible-with-the-10GBASE-T-/-IC-will-be-reset.The-module-provides-standard-serial-ID-information-compliant-with-SFP-MSA,-which-can-be-accessed-with-address-of-A0h-via-the-2wire-serial-CMOS-EEPROM-protocol.-The-physical-IC-can-also-be-accessed-via-2wire-serial-bus-at-address-ACh.-Hot-pluggable-SFP-footprint-Support-10GBASE-T-Compact-RJ-45-connector-assembly-Commercial-Temperature-Range:-0-to-70°CSingle-+3.3V-power-supply10-Gigabit-Ethernet-over-Cat6a/Cat7-cable--RoHS-compliant-and-lead-freeAccess-to-Physical-Layer-IC-via-2-Wire-Serial-Bus-Compliant-with-IEEE-Std-802.3-2002Compliant-with-MSA..
₹ 5,888.20 Ex Tax: ₹ 4,990.00
JTOPTICS® SFPP 10GBASE LR SFP+ transceiver supports up to 10km link lengths over LC duplex SMF fiber. Digital diagnostics monitoring is available via a 2 wire serial interface, as specified in SFF 8472. Each SFP+ transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface card (NICs) etc. Featuring low power consumption, high speed, this 10G SFP+ transceiver is ideal for data center, enterprise wiring closet, service provider transport application, Radio & Baseband Unit, etc.Full duplex transceiver moduleHot pluggable SFP+ form factorCompliant with SFP+ MSA standardDFB transmitter and PIN receiverData rate up to 11.3GbpsCompliant with CPRI specificationWavelength with 1310nmMaximum link length of 10kmLow power dissipationBuilt in digital diagnostic interfaceOperating case temperature Commercial or IndustrialSingle 3.3V power supplyRoHS 6 compliant (lead free)..
₹ 1,593.00 Ex Tax: ₹ 1,350.00
JTOPTICS® 10GBASE SR 300m SFPP optical transceiver, 10G SFPP SR(JT 10G SFPP DD SR) SFP+ transceiver supports up to 400m link lengths over OM4 MMF (300m over OM3 MMF) via an LC duplex connector. Digital diagnostics monitoring is available via a 2 wire serial interface, as specified in SFF 8472. Each SFP+ transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface card (NICs) etc.Full duplex transceiver moduleHot pluggable SFP+ form factorCompliant with SFP+ MSA standardVCSEL transmitter and PIN receiverData rate up to 11.3GbpsCompliant with CPRI specificationMaximum link length of 300mLow power dissipationOperating case temperature range Commercial or IndustrialSingle 3.3V power supplyRoHS 6 compliant (lead free)..
₹ 1,014.80 Ex Tax: ₹ 860.00
JTOPTICS MPO trunk patch cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. MPO trunk type is for 40G QSFP+ SR4/CSR4, 100G QSFP28 SR4/PSM4, 400G SR4/DR4, optics direct connection and high-density data center applications. MPO cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables..
₹ 3,304.00 Ex Tax: ₹ 2,800.00
JT Mobility's Combined Charging System (CCS) is grounded in open and universal standards tailored for electric vehicles. The CCS seamlessly integrates single-phase and rapid three-phase charging utilizing alternating current, with a maximum capacity of 43 kilowatts (kW). Additionally, it supports direct-current charging with a maximum capacity of 200 kW, with future compatibility projected to reach up to 350 kW – all within a singular system. This comprehensive approach addresses all essential charging requirements.The Combo CCS2 charging connectors are available in a range from 60A to 200A. They incorporate both alternating current (AC) Type 2 charging and direct current (DC) CCS fast charge capabilities in a single inlet, catering to the vehicle side of the charging process.60A 80A 125A 200A CCS 2 IEC 62196-3 Male Inlet SocketIP55 RatedUnique Integrated DesignMounted on the side of the vehicle/EVSE.High strength flame retardant nylonPin Material: Copper Alloy & Silver PlatingBett..
₹ 17,287.00 Ex Tax: ₹ 14,650.00
JTOPTICS®-SFPP-10GBASE-LR-SFP+-transceiver-supports-up-to-20km-link-lengths-over-LC-duplex-SMF-fiber.-Digital-diagnostics-monitoring-is-available-via-a-2-wire-serial-interface,-as-specified-in-SFF-8472.-Each-SFP+-transceiver-module-is-individually-tested-to-be-used-on-a-series-of-Cisco-switches,-routers,-servers,-network-interface-card-(NICs)-etc.-Featuring-low-power-consumption,-high-speed,-this-10G-SFP+-transceiver-is-ideal-for-data-center,-enterprise-wiring-closet,-service-provider-transport-application,-Radio-&-Baseband-Unit,-etc.Full-duplex-transceiver-moduleHot-pluggable-SFP+-form-factorCompliant-with-SFP+-MSA-standardDFB-transmitter-and-PIN-receiverData-rate-up-to-11.3GbpsCompliant-with-CPRI-specificationWavelength-with-1310nmMaximum-link-length-of-20kmLow-power-dissipationBuilt-in-digital-diagnostic-interfaceOperating-case-temperature-Commercial-or-IndustrialSingle-3.3V-power-supplyRoHS-6-compliant-(lead-free)..
₹ 1,593.00 Ex Tax: ₹ 1,350.00
JTOPTICS® 10Gb/s transceiver module supports up to 10km link lengths over LC duplex SMF fiber. Digital diagnostics monitoring is available via a 2 wire serial interface, as specified in SFF 8472. Each SFP+ transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface card (NICs) etc. Featuring low power consumption, high speed, this 10G SFP+ transceiver is ideal for data center, enterprise wiring closet, service provider transport application, Radio & Baseband Unit, etc.Full duplex transceiver moduleHot pluggable SFP+ form factorCompliant with SFP+ MSA standardEML transmitter and APD receiverData rate up to 11.3GbpsCompliant with CPRI specificationWavelength with 1310 nmMaximum link length of 40kmLow power dissipation Available with Commercial and Industrial TemperatureSingle 3.3V power supplyRoHS 6 compliant (lead free)..
₹ 14,183.60 Ex Tax: ₹ 12,020.00
JTOPTICS MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 40G / 100G /200G/ 400G connectivity. 8/12 Fiber MPO Fanout Assemblies provide connections between QSFP+ to 4 x SFP+, QSFP28 to 4 x SFP28 and QSFP-DD to 4 x QSFP-28 Transceiver Modules. JTOPTICS MPO harness cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables..
₹ 5,428.00 Ex Tax: ₹ 4,600.00
The JT Mobility holder is designed to assist you in neatly storing your CCS Combo 2 (Electric Vehicle end) plug near the home charging station or charger when it is not in use. This product is engineered to be stronger, anti-aging, more environmentally friendly, and halogen-free. It offers increased resistance to bending, ensuring a longer service life.Engineered by JT Mobility's skilled engineers, the IEC Dummy socket is crafted to emulate real usage scenarios. The EVSE plug holder is designed to protect core contacts, boasting high carrying capacity and a long mechanical life.After completing the charging process and disconnecting the cable from the car, it is recommended to store the cable in a warm and dry place for 24 hours to enhance its longevity. Therefore, the dummy socket is the perfect way to keep your cable organized and well-maintained.CCS Type-2 AC Dummy Socket Holder for IEC-62196-3 CCS-2 EV PlugAnti-flaming materialPressure-resistant, abrasion resistance, impact resista..
₹ 1,888.00 Ex Tax: ₹ 1,600.00
JTOPTICS®-10GBASE-ZR-SFP+-transceivers-are-Enhanced-Small-Form-Factor-Pluggable-SFP+-transceivers-designed-for-use-in-10-Gigabit-multi-rate-links-up-to-100km-of-G.652-single-mode-fiber.-They-support-10G-Ethernet-ZR-and-10G-Fibre-Channel.-Digital-diagnostics-functions-are-available-via-a-2-wire-serial-interface.-The-optical-transceiver-is-compliant-per-the-RoHS-Directive-2011/65/EU.Full-duplex-transceiver-moduleHot-pluggable-SFP+-form-factorCompliant-with-SFP+-MSA-standardEML-transmitter-and-APD-receiverData-rate-up-to-11.3GbpsCompliant-with-CPRI-specificationWavelength-with-1550-nmMaximum-link-length-of-80kmLow-power-dissipation-Available-with-Commercial-and-Industrial-TemperatureSingle-3.3V-power-supplyRoHS-6-compliant-(lead-free)..
₹ 14,183.60 Ex Tax: ₹ 12,020.00
JTOPTICS MTP® trunk patch cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. MTP® trunk type is for 40G QSFP+ SR4/CSR4, 100G QSFP28 SR4/PSM4, 400G SR4/DR4, optics direct connection and high-density data center applications. MTP® cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables..
₹ 3,528.20 Ex Tax: ₹ 2,990.00
JTOPTICS®-1000BASE-SR-500m-SFPP-optical-transceiver,-1G-SFP-SR-(JT-1G-SFP-DD-SR)-SFP-transceiver-supports-up-to-500m-link-lengths-over-OM4-MMF-(300m-over-OM3-MMF)-via-an-LC-duplex-connector.-Digital-diagnostics-monitoring-is-available-via-a-2-wire-serial-interface,-as-specified-in-SFF-8472.-Each-SFP-transceiver-module-is-individually-tested-to-be-used-on-a-series-of-Cisco-switches,-routers,-servers,-network-interface-card-(NICs)-etc.Full-duplex-transceiver-moduleHot-pluggable-SFP-form-factorCompliant-with-SFP-MSA-standardVCSEL-transmitter-and-PIN-receiverData-rate-up-to-1.1GbpsCompliant-with-CPRI-specificationMaximum-link-length-of-500mLow-power-dissipationOperating-case-temperature-range-Commercial-or-IndustrialSingle-3.3V-power-supplyRoHS-6-compliant-(lead-free)..
₹ 708.00 Ex Tax: ₹ 600.00
JTOPTICS® 1GBASE BD LR 20Km SFP optical transceiver, 1G SFP BD LR(JT 1G SFP BD LR) Bidirectional SFP transceiver is intended mainly for connecting high speed hubs, Ethernet switches, and routers together in different wiring closets or buildings using long cabling runs and developed to support longer length on fiber backbones. BIDI Transceiver used only one fiber to transmit and receive optical signal.It is mainly used in different applications such as router,media converter,switched backlane applications. Dual data rate of 1.25Gbps operation;1310nm FP laser and PIN photo detector for 20km Compliant with SFP MSA and SFF 8472 Duplex LC receptacle;Digital Diagnostic MonitoringInternal Compatible with SONET OC 24 LR 1Complied with RoHS..
₹ 1,699.20 Ex Tax: ₹ 1,440.00
JTOPTICS® 1Gb/s (JT 1G SFP RJ) Copper Small Form Pluggable (SFP) transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE T standards as specified in IEEE 802. 3 2002 and IEEE 802.3ab, which supporting 1000Mbps data rate up to 100 meters reach over unshielded twisted pair category 5 cable.The module supports 1000 Mbps full duplex data links with 5 level Pulse Amplitude Modulation (PAM) signals. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.Support 1000BASE T Operation in Host SystemsSupport RX_LOS as Link indication For 100m Reach Over UTP Cat 5/5e/6Cable Hot Pluggable SFP FootprintFully Metallic Enclosure for low EMILow Power Dissipation (1.05W Typical) Compact RJ 45 ConnectorAccess to Physical Layer IC via 2 Wire Serial Bus Com..
₹ 1,354.64 Ex Tax: ₹ 1,148.00
JTOPTICS MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 100G / 400G /800G connectivity. 24 fiber MPO to LC Fan out Assemblies provide connections between single CFP/CXP (100G transceiver with MPO interface) and 10 x SFP+ (10G transceivers with LC Duplex Interface). JTOPTICS MPO harness cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables..
₹ 8,260.00 Ex Tax: ₹ 7,000.00
JTOPTICS® SFPP 10GBASE LR SFP+ transceiver supports up to 10km link lengths over LC duplex SMF fiber. Digital diagnostics monitoring is available via a 2 wire serial interface, as specified in SFF 8472. Each SFP+ transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface card (NICs) etc. Featuring low power consumption, high speed, this 10G SFP+ transceiver is ideal for data center, enterprise wiring closet, service provider transport application, Radio & Baseband Unit, etc.Operating Data Rate up to 1.25Gbps1550nm DFB Laser Transmitter40km with 9/125 µm SMFSingle 3.3V Power SupplyHot Pluggable SFP FootprintDuplex LC Connector InterfaceCompliant with MSA SFP SpecificationCompliant with SFF 8472..
₹ 1,923.40 Ex Tax: ₹ 1,630.00
JTOPTICS® 1Gb/s transceiver module supports up to 20km link lengths over LC duplex SMF fiber. Featuring low power consumption, the hot swappable 1G SFP transceiver is ideal for Internet Service Provider (ISP) Gigabit Ethernet communication links, Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks and other optical links. Featuring low power consumption, high speed, this 10G SFP+ transceiver is ideal for data center, enterprise wiring closet, service provider transport application, Radio & Baseband Unit, etc.Dual data rate of 1.25Gbps/1.063Gbps operation1310nm FP laser and PIN photo detector for 20km Compliant with SFP MSA and SFF 8472 with duplex LC receptacleComplied with RoHS20km with 9/125 µm SMFHot Pluggable SFP Footprint Duplex LC Connector InterfaceSingle 3.3V Power SupplyClass 1 FDA and IEC60825 1 Laser Safety Compliant..
₹ 708.00 Ex Tax: ₹ 600.00
JTOPTICS OM3 Multimode patch cords are designed for low loss data center applications. They provide flexible interconnection to active equipment, passive optical devices and cross-connects. JTOPTICS patch cords are terminated with standard grade zirconia ferrule connectors which help assure high transmission quality. All cables conform to IEC, EIA TIA or Telcordia standards. ..
₹ 413.00 Ex Tax: ₹ 350.00
JTOPTICS MTP® breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MTP® harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 40G / 100G /200G/ 400G connectivity. 8/12 Fiber MTP® Fanout Assemblies provide connections between QSFP+ to 4 x SFP+, QSFP28 to 4 x SFP28 and QSFP-DD to 4 x QSFP-28 Transceiver Modules. JTOPTICS MTP® harness cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables..
₹ 5,369.00 Ex Tax: ₹ 4,550.00
JTOPTICS® 1GBASE SX SFP transceivers s are small form factor pluggable module for bi directional serial optical data communications such as Gigabit Ethernet 1000BASE SX and Fiber Channel FC PH 2 for 100 M5 SN 1 and 100 M6 SN 1. . It is with the SFP 20 pin connector to allow hot plug capability.This module is designed for multi mode fiber and operates at a nominal wavelength of 850nm. Operating Data Rate up to 1.25Gbps850nm VCSEL Laser Transmitter550m with 50/125µm MMF300m on 62.5/125µm MMFHot Pluggable SFP Footprint Duplex LC Connector InterfaceSingle 3.3V Power SupplyCompliant with MSA SFP Specification..
₹ 2,242.00 Ex Tax: ₹ 1,900.00
JTOPTICS OM3 Multimode patch cords are designed for low loss data center applications. They provide flexible interconnection to active equipment, passive optical devices and cross-connects. JTOPTICS patch cords are terminated with standard grade zirconia ferrule connectors which help assure high transmission quality. All cables conform to IEC, EIA TIA or Telcordia standards. ..
₹ 413.00 Ex Tax: ₹ 350.00
JTOPTICS MTP® breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MTP® harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 40G / 100G /200G/ 400G connectivity. 8/12 Fiber MTP® Fanout Assemblies provide connections between QSFP+ to 4 x SFP+, QSFP28 to 4 x SFP28 and QSFP-DD to 4 x QSFP-28 Transceiver Modules. JTOPTICS MTP® harness cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables...
₹ 5,522.40 Ex Tax: ₹ 4,680.00
