8 Fiber Single Mode Mpo Lc Fan Out Cable With Mpo Female Push-Pull To 4 Lc Duplex Uniboot Connector
Click Image for Gallery
SPECIFICATIONS | |
Connector A | MPO Female (12 Fiber) Push-Pull |
Cable Jacket | Plenum (OFNP) |
MPO Connector IL | 0.35dB Max |
Wavelength | 1310/1550nm |
MPO Connector RL | ≥60dB |
Jacket OD | 3.0mm |
Fiber Count | 8 Fibers |
Installation Tensile Load | 100 N |
Operating Temp Range | -10°C to +70°C |
Fiber Mode | OS2 SMF 9/125μm |
Connector Make | JTOPTICS / NISSIN |
Connector B | LC PC Uniboot Push-Pull |
LC Connector IL | ≤0.2dB |
Storage Temp Range | -40°C to +85°C |
LC Connector RL | ≥50dB |
Fan-Out Diameter | 2.0mm |
Long-Term Tensile Load | 50 N |
Connector Quality | Standard |
JTOPTICS MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 40G / 100G /200G/ 400G connectivity. 8/12 Fiber MPO Fanout G207:G208Assemblies provide connections between QSFP+ to 4 x SFP+, QSFP28 to 4 x SFP28 and QSFP-DD to 4 x QSFP-28 Transceiver Modules.
JTOPTICS MPO harness cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and JTOPTICS brand connector kits. The trunk cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables
High performance in IL & RL
Low Insertion Loss
100% 3D Tested
Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942
Compliant for MPO/MTP interfaces
Corning Bend Insensitive Fiber with Min. Bend Radius
All our own products can be purchased direct online or via our sales team.
E-Mail: sales@jtoptics.com
Phone: +91-8693099309 / 9699789777