24 fiber mpo (f) 10xlc dx single mode os2 fan-out patch cable for 100g-10g lr10 connectivity

24 fiber mpo (f) 10xlc dx single mode os2 fan-out patch cable for 100g-10g lr10 connectivity

Certified Quality

Our quality policy is maintained throughout our business in accordance with our commitment to customer and regulatory requirements.

MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high density networking and used in data center, telecom and backbone application for 100G connectivity. 100G parallel optics transceivers (100GBASE-XR10) can support 10x10G modes this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. 24 fiber MPO to LC Fan out Assemblies provide connections between single CFP/CXP (100G transceiver with MPO interface) and 10 x SFP+ (10G transceivers with LC Duplex Interface). 


FEATURES

       Lower Insertion Loss & Higher Performance

       Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942

       Low IL and stable signal transmission ensuring your network safety

       High-quality MPO connectors and guaranteed by 3D interferometer

       100% factory tested

APPLICATIONS

       CFP to SFP+ Connection

       CXP to SFP+ Connection

       CFP+ to SFP+ Connection

       100GE to 10GE Interconnection




SPECIFICATIONS
Connector AMPO Female (24 Fiber)
Cable JacketPlenum (OFNP)
MPO Connector IL0.35dB Max
Wavelength1310/1550nm
MPO Connector RL≥60dB
Jacket OD3.5mm
Fiber Count24 Fibers
Installation Tensile Load100 N
Operating Temp Range-10°C to +70°C
Fiber ModeOS2 SMF 9/125μm
Connector MakeNissin/Senko
Connector BLC PC Duplex
LC Connector IL≤0.2dB
Storage Temp Range-40°C to +85°C
LC Connector RL≥50dB
Fan-Out Diameter2.0mm
Long-Term Tensile Load50 N
Connector QualityStandard

Write a review

Note: HTML is not translated!
    Bad           Good

Free Shipping

On Order Above Rs 5000 **

Bulk Order

Upto 30% Discount on Bulk Order

  • Views: 2506
  • Product Code: JTMPS224MOSFLCPXX 
  • Availability: In Stock

Available Options

Tags:mpo lc sm break out cable, mpo-lc breakout cable, mtp lc harness cable, mtp breakout cable, 1000g to 10g cable, cfp to sfp cable, cfpp to sfp cable, cxp to sfp cable, mpo sm lc cable, 100g cable, single mode mpo

MPO adapter works for any MTP / MPO Connector from 4 fiber to 72 fiber. Widely used in trunk cabling..
MPO Loopback Assemblies are designed for testing of MPO parallel links and for device burn-in. By cr..
MPO Cassette Modules are fitted with 24 Fibers breakout cable and have LC adapters on the front side..
Face Plate is used in rack mountable, LIU / ODF. Our high density adapter panel preloaded with fiber..
Fiber optical pigtails are used in telecom, Datacom networks and also used for high speed metropolit..
Optical Fiber Splice Tray is designed to safely route and store optical fiber and associated splices..
Track Order