-40 %
-40 %
JTOPTICS® Trunk cable
assemblies are composed of high-quality OFNP jacketed fiber optic cables used
in data centers, telecom, and backbone applications for 400G / 800G
connectivity. 16 Fiber OM3 MPO Cable 16F MPO Female to 16F MPO Female OM3 Patch
Cord Low Loss OFNP (Plenum) Polarity trunk patch cor..
-40 %
-40 %
JTOPTICS breakout cable assemblies are composed of high quality OFNP jacketed fiber optic cables used in data center, telecom and backbone application for 400G / 800G connectivity.
16 Fiber MPO harness patch cord assemblies are used to interconnect QSFP-DD and QSFP-DD800 transceivers. QSFP-DD to 8 ..
-50 %
-50 %
JTOPTICS® 200G QSFP28-DD Breakout AOC is a QSFP56 VCSEL-based (Vertical Cavity Surface-Emitting Laser), cost effective 200Gb/s to 2 x 100Gb/s active optical splitter cable (AOC) designed for use in 200G/2x100G Ethernet and InfiniBand EDR applications. It is compliant with QSFP28 and QSFP-DD MSA spec..
-35 %
-35 %
JTOPTICS®
SFP28 25GBASE-ER transceiver supports data rates up to 25.78 Gb/s and link
lengths up to 40 km over single-mode fiber at 1310nm. It complies with SFP28
MSA, SFF-8472 Rev 12.2, SFF-8431 Rev 3.0, and SFF-8432, and is RoHS 2011/65/EU
compliant. Featuring a 20-contact edge connector, it is ide..
-35 %
-35 %
JTOPTICS® 25GBASE SR 100m SFP28 optical transceiver, is designed a high performance module for short range data communication and interconnect applications which operate at 25.78125 Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. This module is designed to operate over multimode fiber syst..
-35 %
-35 %
JTOPTICS® SFP28 25GBASE LR is designed for use in Ethernet links up to 25.78 Gb/s data rate and up to 10 km link length.hey are compliant with SFF 8472 Rev 12.2 and compatible with SFF 8432 and applicable portions of SFF 8431 Rev. 3.0. The optical transceiver is compliant per the RoHS Directive 2011..
-to-4-x-12f-mpo-(f)--om4-distribution-cable-300x300.png "48 Fiber Multimode Om4 Breakout Mpo Trunk Cable 4 x 12F Mpo (F) to 4 x 12F Mpo (F) Om4 Distribution Cable")
-20 %
-20 %
JTOPTICS® 48 core MPO/MTP Trunk Fiber Optic Cable ribbon and trunk mulitcore cable assemblies facilitate rapid deployment of high-density backbone cabling in data centers and other high fiber environment, reducing network installation or reconfiguration time and cost. MTP/MPO are used to interconnec..
-60 %
-60 %
The Arista CAB-Q-Q-100G is a high-performance 100G DAC (Direct Attach Copper) cable designed for seamless connectivity in modern networking environments. Featuring QSFP28 connectors on both ends, this passive twinax copper cable supports short-distance data transmission, typically up to 5 meters. It..
-60 %
-60 %
The Brocade 100G-Q28-Q28-C is a high-performance 100G DAC (Direct Attach Copper) cable designed for reliable connectivity in data-intensive networking environments. Equipped with QSFP28 connectors on both ends, this passive twinax copper cable is optimized for short-distance applications, typically ..
-60 %
-60 %
The Cisco QSFP-100G-CU is a high-performance 100G DAC (Direct Attach Copper) cable designed for efficient data transmission in networking environments. Featuring QSFP28 connectors on both ends, this passive twinax copper cable provides reliable connectivity for short-distance applications, typically..
-60 %
-60 %
The Dell 470-ACUC is a 200G Active Optical Cable (AOC) designed to connect a QSFP56 port to two QSFP28 ports, effectively allowing the aggregation of a 200Gbps connection into two separate 100Gbps links. Utilizing OM3 multimode fiber, this cable is ideal for high-speed data transmission in data cent..
-60 %
-60 %
The Dell DAC-Q28-100G is a high-quality 100G DAC (Direct Attach Copper) cable designed for seamless data transmission in high-performance networking environments. Featuring QSFP28 connectors on both ends, this passive twinax copper cable supports short-distance connections, typically up to 5 meters...