800G Dr8 Optical Transceiver 800Gbase-Dr8 Qdd-800 Pam4 1310Nm 500M Dom Mtp®/Mpo-16 Smf Module
| SPECIFICATIONS | |
| Connector | MTP/MPO-16 |
| DDM/DOM | Supported |
| Wavelength | 1310nm |
| Form Factor | QSFP-DD |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| TX Power | -2.9 ~ +4.0dBm |
| Max Data Rate | 850Gbps (8x 106.25Gbps) |
| Media | SMF |
| Application | 800GBASE-DR8 |
| Max Cable Distance | 500 meter |
| Modulation Format | PAM4 |
| Protocols | QSFP-DD MSA Compliant |
| Receiver Type | PIN |
| Receiver Sensitivity | <-10.3dBm |
| Transimitter Type | EML |
| Power Consumption | ≤16.5W |
JTOPTICS® QSFPDD 800GBASE DR8 is offers a transmission distance of up to 500m over a single mode fiber link. Quad Small Form Factor Pluggable Double Density (QSFP DD) transceiver with optical MPO16/MTP-16 connector is designed for long range single mode 800 Gigabit Ethernet (800GbE) high speed applications of up to 800 gigabits per second. The 800 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane. It can be used as 8x100G breakout to QSFP28 100G. It supports link lengths of up to 500m parallel SMF with MTP/MPO 16 connector. It is compliant to QSFP DD MSA, IEEE 802.3 protocol and 400GAUI 8 standards.
QSFP DD MSA and CMIS compliant
Compliant to 802.3 800GBASE DR8
8x106.25Gbps(53.125GBd PAM4) electrical interface
8x106.25Gbps(53.125GBd PAM4) Optics architecture
Power consumption <16.5W
Maximum link length of 500m SMF with KP FEC
MPO 16 receptacles ,Built in digital diagnostic functions
Operating case temperature 0°C to +70°C
3.3V power supply voltage RoHS compliant (lead free)
All our own products can be purchased direct online or via our sales team.
E-Mail: sales@jtoptics.com
Phone: +91-8693099309 / 9699789777
Guaranteed Compatible
Industry Leading Lifetime Warranty
24x7 Technical Support
99.98% Reliability Rate
Savings of up to 90% off OEM Prices
