800G Osfp Optical Transceiver 800Gbase-Dr8 Osfp Pam4 1310Nm 500M Dom Mtp®/Mpo-16 Smf Optical Module
SPECIFICATIONS | |
Connector | MTP/MPO-16 |
DDM/DOM | Supported |
Wavelength | 1310nm |
Form factor | OSFP |
Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
TX Power | -2.9 ~ +4.0dBm |
Max Data Rate | 850Gbps (8x 106.25Gbps) |
Media | SMF |
Application | 800GBASE-DR8 |
Max Cable Distance | 500 meter |
Modulation Format | PAM4 |
Protocols | OSFP MSA Compliant |
Receiver Type | PIN |
Receiver Sensitivity | <-10.3dBm |
Transimitter Type | EML |
Power Consumption | ≤16.5W |
JTOPTICS
800G OSFP DR8 transceiver is a high-quality optical transceiver designed for
800 Gigabit Ethernet links over 500 meters of single-mode fiber. It features 8
independent electrical input/output channels, each operating at speeds up to
106.25 Gbps. The transceiver includes two transmitter/receiver units, each
functioning on a set of wavelengths on the ITU G.694.2 CWDM grid at 1310 nm.
Its electrical interface complies with the 800GAUI-8 standard defined by IEEE
802.3ck and is also compliant with the OSFP MSA. This transceiver is suitable
for various network applications, including Internet Protocol switches and
routers.
Hot-pluggable
OSFP form factor
Supports
850Gb/s aggregate bit rate
Power
dissipation <16W
Commercial
case temperature range of 0°C to 70°C
Single
3.3V power supply
Maximum
link length of 500m on Single Mode Fiber (SMF)
Aligned
with IEEE 802.3bs
8x100G
PAM4 EML-based 1310nm transmitter
8x100G
PAM4 retimed 800GAUI-8 electrical interface
MPO-16
receptacles
I2C
management interface
RoHS
compliant
All our own products can be purchased direct online or via our sales team.
E-Mail: sales@jtoptics.com
Phone: +91-8693099309 / 9699789777