400G Aoc Cable Qsfp-Dd To Qsfp-Dd Active Optical Cable Om3 Multimode
SPECIFICATIONS | |
Connector - A | QSFP-DD SR8 |
Connector - B | QSFP-DD SR8 |
Cable Assembly Type | Active Optical Cable |
Cable Type | OM3/OM4 Multimode |
Jacket Material | PVC (OFNP) |
Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
TX/RX | VCSEL/PIN |
Max Data Rate | 400Gbps |
Brand | JTOPTICS® |
JTOPTICS® 400G QSFP-DD AOC (active optical cable) is a 400 Gb/s parallel active optical cable, which transmits parallel 8×50 Gb/s PAM4 signals over multi-mode fiber (MMF) cables up to 100m. It is compliant with QSFP-DD MSA and the CMIS 4.0. The 400G QSFP56-DD AOC cables supports eight electrical interface lanes, each of which operate in the data rate of 53.125G, with an overall aggregate bandwidth up to 425Gb/s. These modules of cables are designed to operate over multi-mode fiber systems using a nominal wavelength of 850nm.The electrical interface uses a 76 contact edge type connector. This active optical cable is compliant with IEEE 802.3cd, OIF-CEI-04.0, QSFP-DD MSA, and QSFP-DD-CMIS-rev4p0.
Hot-pluggable QSFP-DD active optical cable assemblies
8x 50G PAM4 electrical interface
8x 50G PAM4 optical interface
Data rate up to 53.125Gbps per channel.
8-channels 850nm VCSEL array and PIN photo-detector array
Compliant with QSFP-DD MSA, CMIS and IEEE 802.3
Low power dissipation
Compliant with IEEE 802.3cd 200GBASE-SR4 and InfiniBand HDR/HDR100
MMF cable with customizable length up to 70m (OM3) or 100m (OM4/OM5)
10W maximum power dissipation per 400G QSFP-DD SR8 module
Commercial case operating temp. range
Single 3.3V power supply
Built-in digital diagnostic functionality
RoHS compliant (lead free)
All our own products can be purchased direct online or via our sales team.
E-Mail: sales@jtoptics.com
Phone: +91-8693099309 / 9699789777