100G Qsfp28 Sr4 Transceiver 100Gbase-Sr4 Qsfp28 850Nm 100M Dom Mtp®/Mpo-12 Multimode Optical Transceiver Module
| SPECIFICATIONS | |
| CDR | TX & RX Built-in CDR |
| Connector | MTP/MPO-12 |
| DDM/DOM | Supported |
| Wavelength | 850nm |
| Form Factor | QSFP28 |
| Extinction Ratio | 2dB |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| TX Power | -8.4~2.4dBm |
| Max Data Rate | 103.125Gbps (4x 25.78Gbps) |
| Media | MMF |
| Max Cable Distance | 70m@OM3/100m@OM4 |
| Modulation Format | NRZ |
| Power budget | 1.9dB |
| Protocols | QSFP28 MSA Compliant |
| Receiver Type | PIN |
| Receiver Sensitivity | <-10.3dBm |
| Transimitter Type | VCSEL 850nm |
| Power Consumption | 3.5W |
| Transmit and Dispersion Penalty | 5dB |
JTOPTICS® 100GBASE SR4 100m QSFP28 optical transceiver, 100G QSFP28 SR4 (JT 100G QSFP28 MPO SR4) is designed for use in 100 Gigabit Ethernet links up to 100m over Multi Mode Fiber (MMF). It is compliant with the QSFP28 MSA and IEEE 802.3bm 100GBASE SR4. It integrates 4 data lanes in each direction with 4×25.78125Gb/s bandwidth. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP/MPO connector.
Hot pluggable QSFP28 form factor
4 channels full duplex transceiver module
Supports 103.1Gb/s aggregate bit rate.
Max. link length of 70m on OM3 & 100m on OM4 (MMF)
4x25Gb/s 850nm VCSEL based transmitter
4 channels PIN photo detect.
Internal CDR circuits (receiver and transmitter channels)
Support CDR bypass
Data rate up to 25.78125Gbps or 28.05Gbps per channel.
Supports MPO/MTP 12 Connector
3.5 W maximum power dissipation
Single 3.3V power supply
Comply with IEEE 802.3bm 100GBASE SR4 and CAUI 4 standard.
RoHS 6 compliant
All our own products can be purchased direct online or via our sales team.
E-Mail: sales@jtoptics.com
Phone: +91-8693099309 / 9699789777
Guaranteed Compatible
Industry Leading Lifetime Warranty
24x7 Technical Support
99.98% Reliability Rate
Savings of up to 90% off OEM Prices
