Qsfp-Dd 400G Sr8 Optical Transceiver 400Gbase-Sr8 Qsfp-Dd Pam4 850Nm 100M Dom Mtp®/Mpo-16 Apc Multimode Module
SPECIFICATIONS | |
Connector | MTP/MPO-16 |
DDM/DOM | Supported |
Wavelength | 850nm |
Form Factor | QSFP-DD |
Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
TX Power | -6~4dBm |
Max Data Rate | 400Gbps |
Media | MMF |
Application | 400GBASE Ethernet |
Max Cable Distance | 70m@OM3/100m@OM4 |
Modulation Format | PAM4 |
Protocols | QSFP-DD MSA Compliant |
Receiver Type | PIN |
Receiver Sensitivity | <-7.9dBm |
Transimitter Type | VCSEL 850nm |
Power Consumption | <10W |
JTOPTICS® 400GBASE SR8 100m is designed to operate over multimode fiber systems using a nominal wavelength of 850nm (MMF). It is compliant with the QSFP28 MSA and IEEE 802.3bm 100GBASE SR4. It integrates eight data lanes in each direction with 8x26.5625G. The electrical interface uses a 76 contact edge type connector. The optical interface uses a 16 fiber MTP (MPO) connector.It is compliant to IEEE 802.3bs protocol and 400GAUI 8/CEI 56G VSR PAM4 standard.
8 channels full duplex transceiver modules
Transmission data rate up to 53Gbps per channel
8x53Gbps PAM4 transmitter and PAM4 receiver
8 channels 850nm VCSEL array
8 channels PIN photo detector array
Internal CDR circuits on both receiver and transmitter
Power consumption <8.5W
Hot Pluggable QSFP DD form factor
Max. link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
MPO 16 APC connector receptacle
Built in digital diagnostic functions
Operating case temperature 0°C to +70°C
3.3V power supply voltage
RoHS compliant(lead free)
All our own products can be purchased direct online or via our sales team.
E-Mail: sales@jtoptics.com
Phone: +91-8693099309 / 9699789777