Qsfp-Dd 400G Dr4 Optical Transceiver 4X100Gbase-Dr4 Pam4 1310Nm 500M Dom Mtp®/Mpo-12 Apc Smf Module
| SPECIFICATIONS | |
| Connector | MTP/MPO-12 |
| DDM/DOM | Supported |
| Wavelength | 1310nm |
| Electric Signal | 8x50G |
| Form Factor | QSFP-DD |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| TX Power | -2.9~4.0dBm |
| Max Data Rate | 400Gbps |
| Media | SMF |
| Application | 400GBASE Ethernet |
| Max Cable Distance | 500m |
| Modulation Format | PAM4 |
| Optical Signal | 4x100G |
| Protocols | QSFP-DD MSA Compliant |
| Receiver Type | PIN |
| Receiver Sensitivity | <-5.9dBm |
| Transimitter Type | 1310nm EML |
| Power Consumption | <12W |
JTOPTICS® QSFPDD 400GBASE DR4 is offers a transmission distance of up to 500 meter over a single mode fiber link. Quad Small Form Factor Pluggable Double Density (QSFP DD) transceiver with optical MPO 12/MTP 12 connector is designed for long range single mode 400 Gigabit Ethernet (400GbE) high speed applications of up to 400 gigabits per second. The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane. It can be used as 4x100G breakout to QSFP28 DR 100G. It supports link lengths of up to 500m parallel SMF with MTP/MPO 12 connector. It is compliant to QSFP DD MSA, IEEE 802.3bs protocol and 400GAUI 8 standards. It can be used as 4x100G breakout to QSFP28 DR 100G..
QSFP DD MSA and CMIS compliant
Compliant to 802.3bs 400GBASE DR4
8x53.125Gbit/s PAM4 electrical interface(400GAUI 8)
4x106.25Gbps(53.125GBd PAM4) Optics architecture
Power consumption <10W
Maximum link length of 500m G.652 SMF with KP FEC
MPO 12 receptacles
Built in digital diagnostic functions
Operating case temperature 0°C to +70°C
3.3V power supply voltage
RoHS compliant(lead free)
All our own products can be purchased direct online or via our sales team.
E-Mail: sales@jtoptics.com
Phone: +91-8693099309 / 9699789777
Guaranteed Compatible
Industry Leading Lifetime Warranty
24x7 Technical Support
99.98% Reliability Rate
Savings of up to 90% off OEM Prices
