Menu
Your Cart

Type-2 Female Inlet Socket With 0.5 Meter Cable For Evse Comply To Iec 62196-2 Single/Three Phase 32Amp

JTEVS32A3PT2FC EV Products
Secured
Advanced Security
Free Shipping
Free delivery over ₹100,000
Free Returns
Hassle free returns
Type-2 Female Inlet Socket With 0.5 Meter Cable For Evse Comply To Iec 62196-2 Single/Three Phase 32Amp
The JT Mobility Type 2 socket (Female) is designed for installation in a charging point with a maximum rating of 3-phase 32A. It should be used exclusively in combination with an Electric Vehicle Supply Equipment (EVSE) controller. The socket features a high-quality insulating thermoplastic coating ..
SPECIFICATIONS
16A / 250VAC Cable 3*2.5 mm? + 2*0.5 mm?
16A / 480VAC Cable 5*2.5 mm? + 2*0.5 mm?
32A / 250VAC Cable 3*6 mm? + 2*0.5 mm?
32A / 480VAC Cable 5*6 mm? + 2*0.5 mm?
Cable Length 0.5 meter
Contact Pin Copper Alloy, Silver or Nickel Plating
Contact Resistance 0.5m ohm Max
Flame Retardant Grade UL94 V-0
Impact Insertion Force >300N
Insulation resistance >1000Mohm (DC500V)
No Of Phase Three
Number of contacts 7
Operating temperature -30C to +65C
Operation Voltage AC 250V
Protection Degree IP55 (Working Condition)
Rated current 32A
Sealing gasket Rubber or silicon rubber
Shell material Thermoplastic
Standard IEC 62196-2
Temperature Resistance <50K
All our own products can be purchased direct online or via our sales team. E-Mail: sales(@)jtoptics.com Phone: +91-8693099309 / 9699789777
  • Stock: In Stock
  • Model: JTEVS32A3PT2FC
  • MPN: JTEVS32A3PT2FC
₹ 5,000.00

The JT Mobility Type 2 socket (Female) is designed for installation in a charging point with a maximum rating of 3-phase 32A. It should be used exclusively in combination with an Electric Vehicle Supply Equipment (EVSE) controller. The socket features a high-quality insulating thermoplastic coating that ensures IP55 protection against dust and water ingress from all sides, along with a water drainage hole. It is prepared for 4-point fixing, and the screw end is wire-type, with an optional 0.5-meter wire.



Type 2 IEC 62196-2 Female Inlet Socket  for EVSE with 0.5 meter cable

IP55 Rated

Unique Integrated Design

Mounted on the side of the vehicle/EVSE.

High strength flame retardant nylon

Pin Material: Copper Alloy & Silver Plating

Better Conductivity and Higher Energy Transmission

Excellent protection performance resistance to vibration, moisture, dust, and salt spray.

Insulator in flammability UL94 V-0

Comply to IEC 62196 standard.

Nice appearance, hand-held ergonomic design, easy plug

Mechanical life No-load plug in/pull out >10000 times.

SPECIFICATIONS
16A / 250VAC Cable 3*2.5 mm? + 2*0.5 mm?
16A / 480VAC Cable 5*2.5 mm? + 2*0.5 mm?
32A / 250VAC Cable 3*6 mm? + 2*0.5 mm?
32A / 480VAC Cable 5*6 mm? + 2*0.5 mm?
Cable Length 0.5 meter
Contact Pin Copper Alloy, Silver or Nickel Plating
Contact Resistance 0.5m ohm Max
Flame Retardant Grade UL94 V-0
Impact Insertion Force >300N
Insulation resistance >1000Mohm (DC500V)
No Of Phase Three
Number of contacts 7
Operating temperature -30C to +65C
Operation Voltage AC 250V
Protection Degree IP55 (Working Condition)
Rated current 32A
Sealing gasket Rubber or silicon rubber
Shell material Thermoplastic
Standard IEC 62196-2
Temperature Resistance <50K

Write a review

All our own products can be purchased direct online or via our sales team. E-Mail: sales(@)jtoptics.com Phone: +91-8693099309 / 9699789777
Cookie Notification
We use cookies to enhance your experience on our website. By continuing to browse, you consent to our use of cookies. For more information, please see our [Privacy Policy]. https://jtoptics.com/privacy-policy