
SPECIFICATIONS | |
Approx. Diameter Cable (mm) | 12.0 |
Cable Length | 5 Meter |
Cable Nominal Conductor Size (Sq. mm) | 3 Core x 2.5 Sq. mm 1 Core x 0.5 Sq. mm |
Cable Outer Sheathing | Thermoplastic polyurethane (TPU) / TPE (FR) |
Contact Pin | Copper Alloy, Silver or Nickel Plating |
Contact Resistance | 0.5 megohm MAX |
Flame Retardant Grade | UL94 V-0 |
IC-CPD Enclosure Material | ABS |
IC-CPD LCD Display | YES |
IC-CPD Operating Voltage | 100-250V |
IC-CPD Protection Degree | IP 65 |
IC-CPD Rated Current (Max) | 16A |
IC-CPD Standard | IEC 62752 |
Impact Insertion Force: | >300N |
Insulation Resistance | >1000ohm (DC500V) |
Mating Cycles | >10000 |
No Of Phase | Single |
Operating Temperature | -30C to +65C |
Operation Voltage | 100-250V |
Overcurrent Protection | YES |
Overvoltage Protection | YES |
Plug Protection Degree | IP55 - Mated |
Plug Type | Type-2 Female |
Rated current | 16A |
Sealing gasket | Rubber or silicon rubber |
Shell material | Thermoplastic |
Short-circuit Protection | YES |
Standard | IEC 62196-2 |
Supply Connector | 3 Pin (16Amp) / Type-M |
Temperature Resistance | <50K |
Used at | Vehicle Side |
- Stock: In Stock
- Model: JTCCM2T2EU1P1A05-1
- MPN: JTCCM2T2EU1P1A05-1
The JT Mobility Type-2 IEC 62196-2 Portable EV Charger boasts a compact and modularized design, catering to various Electric Vehicle (EV) interfaces. Featuring an overheating protection mechanism and an IP65/Type-M 3-Pin enclosure rating for outdoor use, this EV portable charger stands as a secure and efficient charging solution for EVs. Users are assured ample protection against potential fire hazards, electrical shocks, and hand burns due to charger overheating.
Smartly designed, the Type 2 IEC 62196-2 Portable Chargers facilitate on-the-go charging from various socket types, including standard outlets. These chargers correctly and effectively charge all EVs manufactured based on the Type-2 standard (Europe/India), ensuring high compatibility. Equipped with protective elements, these chargers prioritize the complete safety of both the car and the charging unit.
Enhanced by a TPU sheath cable for improved bending life and wear resistance, these chargers are built to endure regular use. The robust shell is adept at insulating against water, heightening safety levels even in adverse weather conditions or special circumstances.
IEC 62196-2 Plug, Portable EV Charger, Home Charger 16A, IP65, AC, EV Plug, 5m Length
Designed with AC charging mode for convenient charging of electric vehicles (EV) and electric vehicles supply equipment (EVSE), Charging Everywhere
Charge coupler compliant with IEC 62196-2
Ergonomic design and impact resistant
Mechanical Lifespan: Over 10,000 mating cycles
Overheating protection mechanism
Over Voltage, Over Current, Earthing Protection
Short Circuit Protection
IP65 ingress protection rating.
Adopt a bright and smooth panel design with built-in LED indicators.
Easy to use.
SPECIFICATIONS | |
Approx. Diameter Cable (mm) | 12.0 |
Cable Length | 5 Meter |
Cable Nominal Conductor Size (Sq. mm) | 3 Core x 2.5 Sq. mm 1 Core x 0.5 Sq. mm |
Cable Outer Sheathing | Thermoplastic polyurethane (TPU) / TPE (FR) |
Contact Pin | Copper Alloy, Silver or Nickel Plating |
Contact Resistance | 0.5 megohm MAX |
Flame Retardant Grade | UL94 V-0 |
IC-CPD Enclosure Material | ABS |
IC-CPD LCD Display | YES |
IC-CPD Operating Voltage | 100-250V |
IC-CPD Protection Degree | IP 65 |
IC-CPD Rated Current (Max) | 16A |
IC-CPD Standard | IEC 62752 |
Impact Insertion Force: | >300N |
Insulation Resistance | >1000ohm (DC500V) |
Mating Cycles | >10000 |
No Of Phase | Single |
Operating Temperature | -30C to +65C |
Operation Voltage | 100-250V |
Overcurrent Protection | YES |
Overvoltage Protection | YES |
Plug Protection Degree | IP55 - Mated |
Plug Type | Type-2 Female |
Rated current | 16A |
Sealing gasket | Rubber or silicon rubber |
Shell material | Thermoplastic |
Short-circuit Protection | YES |
Standard | IEC 62196-2 |
Supply Connector | 3 Pin (16Amp) / Type-M |
Temperature Resistance | <50K |
Used at | Vehicle Side |