MPO Break Out Cables - JTOPTICS

MPO Break Out Cables - JTOPTICS

High Density MPO-LC Harness Break-Out Cable


MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 40G / 100G /200G/ 400G connectivity.


JTOPTICS MPO cable is designed for high-density application which offers excellent benefits in terms of installation time and space saving. The cable assemblies are used in data centre, telecom, and backbone application for 40-100-400G connectivity.


OM3 & OM4 types MPO-LC breakout cable are very popular in markets. You might see both aqua and violet colours are used for OM4 cable, it’s just choice by different markets. MPO/MTP breakout cable offers up to 144 fibers, but most common versions are 8, 12 and 24. 8F is usually with 4 LC duplex connectors, because they connect with SFP transceivers, which normally have small LC duplex ports. Each pair of fibers for TX & RX of 10G.


MPO/MTP to LC breakout cable fan out a single 40Gbps connection from a 40GBase-SR4 QSFP+ optical transceiver module to four 10Gbps LC SFP+ optical transceiver modules, while 12 fiber type mpo is used in 10G networks. The MPO to LC breakout cable is also an economical solution for a smaller network environment in which you don’t need complicated equipment. 


JTOPTICS MPO breakout cables are factory pre-terminated, tested and packed along with test reports. They are built with high-quality components of Japanese MT ferrules and own brand connector kits. The fan-out cable assemblies are composed of high quality LSZH/OFNP jacketed fiber optic cables



Low insertion loss 0.35dB for MM MPO

JTOPTICS MPO connector features the industry’s highest-precision thermoplastic MT ferrule, designed to 0.35dB IL for elite. Standard loss 0.6dB.



100% 3D Interferometer Test

Besides insertion loss, 3D geometry data affects the performances for MPO cable assemblies. 3D control for MT ferrule is more complex than normal ceramic ferrule. However, it’s so important that JTOPTICS tests 3D 100% for all MPO cables strictly.

High Standard Cable

Bend sensitive fiver G657A single mode, OM3 & OM4 multimode fiber, LSZH/PVC, OFNR/OFNP jacket. We make MPO patch cord with high quality Fiber cables.



Show:
Sort By:

12 Fiber Sm Mpo Lc Break Out Cable, 12f Mpo Female to 4 X Lc Duplex Fan Out / Harness Cable, Low Loss OFNR (Riser), G.657A1 Single Mode, Yellow, Polarity B, For Psm4/Lr4/Fr4/Dr4 Transceiver

MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 40G / 100G /400G / 400G connectivity. 40G parallel optics transceivers (40GBASE-XR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. 8 Fiber MPO Fan out Assemblies provide connections between QSFP+ to 4 x SFP+, QSFP28 to 4 x SFP28 and QSFP-DD to 4 x QSFP-28 with PSM4 / LR / FR / DR Transceiver Modules.FEATURES•       Lower Insertion Loss & Higher Performance•       Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942•       Low IL and stable signal transmission ensuring your ..

12 Fiber Mm Om3 Mpo Lc Break Out Cable, 12f Mpo Female to 4 X Lc Duplex Fan Out / Harness Cable, Low Loss OFNP (Plenum), Om3 Multimode, Aqua, Polarity B, For Sr4 40g 100g Transceiver

MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 40G / 100G /400G / 400G connectivity. 40G parallel optics transceivers (40GBASE-XR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. 8 Fiber MPO Fan out Assemblies provide connections between QSFP+ to 4 x SFP+, QSFP28 to 4 x SFP28 and QSFP-DD to 4 x QSFP-28 with SR4 Transceiver Modules.FEATURES•       Lower Insertion Loss & Higher Performance•       Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942•       Low IL and stable signal transmission ensuring your network safety•&nb..

12 Fiber Mm Om4 Mpo Lc Break Out Cable, 12f Mpo Female to 4 X Lc Duplex Fan Out / Harness Cable, Low Loss OFNP (Plenum), Om4 Multimode, Aqua, Polarity B, For For Sr4 100g 400g Transceiver

MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 40G / 100G /400G / 400G connectivity. 40G parallel optics transceivers (40GBASE-XR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. 8 Fiber MPO Fan out Assemblies provide connections between QSFP+ to 4 x SFP+, QSFP28 to 4 x SFP28 and QSFP-DD to 4 x QSFP-28 with SR4 Transceiver Modules.FEATURES•       Lower Insertion Loss & Higher Performance•       Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942•       Low IL and stable signal transmission ensuring your network safety•&nb..

400G/800G 12 Fiber Mpo Break-Out Cable With Mpo Female And 4 X Lc/Pc Duplex Om5 Multimode Green Color (Ofnp) Low Loss Plenum Cable

MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 40G / 100G /400G / 400G connectivity. OM5 fibers are 100% standards compliant meeting all OM3 and OM4 specifications, with an additional requirement for Differential Mode Delay (DMD) that compensates for modal and chromatic dispersion. And they include additional bandwidth characterization at 953 nm to support extended distances when using SWDM. OM5 fibers apply to data centers which require quick infrastructure deployment with extended reach that want to maintain bandwidth throughout the infrastructure. 8 Fiber MPO Fan out Assemblies used for connections between QSFP28 to 4 x SFP28 , QSFP-DD to 4 x QSFP-28 and QSFP-DD800 to QSFP-56 with SR4 Transceiver Modules.FEATURESLowe..

24 Fiber Mm Om3 Mpo Lc Break Out Cable, 24f Mpo Female to 12 X Lc Duplex Fan Out / Harness Cable, Low Loss OFNP (Plenum), Om3 Multimode, Aqua, Polarity A, For Cxp Cfp 100g Transceiver

MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high density networking and used in data center, telecom and backbone application for 100G connectivity. 100G parallel optics transceivers (100GBASE-XR10) can support 10x10G modes this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. 24 fiber MPO to LC Fan out Assemblies provide connections between single CFP/CXP (100G transceiver with MPO interface) and 10 x SFP+ (10G transceivers with LC Duplex Interface). FEATURES•       Lower Insertion Loss & Higher Performance•       Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942•       Low IL and stable signal transmission ensuring your netwo..

24 Fiber Mm Om4 Mpo Lc Break Out Cable, 24f Mpo Female to 12 X Lc Duplex Fan Out / Harness Cable, Low Loss OFNP (Plenum), Om4 Multimode, Aqua, Polarity A, For Cxp Cfp Qsfp-dd 100g 400g Transceiver

MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high density networking and used in data center, telecom and backbone application for 100G connectivity. 100G parallel optics transceivers (100GBASE-XR10) can support 10x10G modes this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. 24 fiber MPO to LC Fan out Assemblies provide connections between single CFP/CXP (100G transceiver with MPO interface) and 10 x SFP+ (10G transceivers with LC Duplex Interface). FEATURES•       Lower Insertion Loss & Higher Performance•       Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942•       Low IL and stable signal transmission ensuring your netwo..

24 Fiber Sm Mpo Lc Break Out Cable, 24f Mpo Female to 12 X Lc Duplex Fan Out / Harness Cable, Low Loss OFNR (Riser), G.657A1 Single Mode, Yellow, Polarity A, For Cxp Cfp 100g Transceiver

MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high density networking and used in data center, telecom and backbone application for 100G connectivity. 100G parallel optics transceivers (100GBASE-XR10) can support 10x10G modes this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. 24 fiber MPO to LC Fan out Assemblies provide connections between single CFP/CXP (100G transceiver with MPO interface) and 10 x SFP+ (10G transceivers with LC Duplex Interface). FEATURES•       Lower Insertion Loss & Higher Performance•       Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942•       Low IL and stable signal transmission ensuring your netwo..

400G/800G 16 Fiber Mpo Break-Out Cable With Mpo Female And 8 X Lc/Pc Duplex Om5 Multimode Green Color (Ofnp) Low Loss Plenum Cable

MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone application for 40G / 100G /400G / 400G connectivity. OM5 fibers are 100% standards compliant meeting all OM3 and OM4 specifications, with an additional requirement for Differential Mode Delay (DMD) that compensates for modal and chromatic dispersion. And they include additional bandwidth characterization at 953 nm to support extended distances when using SWDM. OM5 fibers apply to data centers which require quick infrastructure deployment with extended reach that want to maintain bandwidth throughout the infrastructure. 16 Fiber MPO trunk patch cord assemblies are used to interconnect QSFP-DD and QSFP-DD800 transceivers. QSFP-DD to 8 x SFP-56 and QSFP-DD800 to QSFP-28 with SR8 Transceiver Module..

12 Fiber Sm Mpo Lc Break Out Cable With Pulling Eye, 12f Mpo Female to 6 X Lc Duplex Fan Out, Low Loss OFNR (Riser), G.657A1 Single Mode, Push Pull Uniboot Connector, Yellow, Polarity B, For Psm4/Lr4/Fr4/Dr4 Transceiver

MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high density networking and used in data center, telecom and backbone application for 40G / 100G connectivity. 40G parallel optics transceivers (40GBASE-LR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. 8 Fiber MPO QSFP+ to SFP+ Fan out Assemblies provide connections between single QSFP+ (40G transceiver with MPO interface) and 4 x SFP+ (10G transceivers with LC Duplex Interface). FEATURES•       Lower Insertion Loss & Higher Performance•       Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942•       Low IL and stable signal transmission ensuring..

12 Fiber Mm Om3 Mpo Lc Break Out Cable With Pulling Eye, 12f Mpo Female to 6 X Lc Duplex Fan Out, Low Loss OFNP (Plenum), Om3 Multimode, Aqua, Push Pull Uniboot Connector, Polarity B, For Sr4 40g 100g Transceiver

MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high density networking and used in data center, telecom and backbone application for 40G / 100G connectivity. 40G parallel optics transceivers (40GBASE-SR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. 8 Fiber MPO QSFP+ to SFP+ Fan out Assemblies provide connections between single QSFP+ (40G transceiver with MPO interface) and 4 x SFP+ (10G transceivers with LC Duplex Interface). FEATURES•       Lower Insertion Loss & Higher Performance•       Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942•       Low IL and stable signal transmission ensuring..

24 Fiber Sm Mpo Lc Break Out Cable With Pulling Eye, 24f Mpo Female to 12 X Lc Duplex Fan Out, Low Loss OFNR (Riser), G.657A1 Single Mode, Yellow, Push Pull Uniboot Connector, Polarity A, For Cxp Cfp 100g Transceiver

MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high density networking and used in data center, telecom and backbone application for 100G connectivity. 100G parallel optics transceivers (100GBASE-XR10) can support 12x10G modes this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. 24 fiber MPO to LC Fan out Assemblies provide connections between single CFP/CXP (100G transceiver with MPO interface) and 12 x SFP+ (10G transceivers with LC Duplex Interface). FEATURES•       Lower Insertion Loss & Higher Performance•       Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942•       Low IL and stable signal transmission ensuring your n..

24 Fiber Mm Om3 Mpo Lc Break Out Cable With Pulling Eye, 24f Mpo Female to 12 X Lc Duplex Fan Out, Low Loss OFNP (Plenum), Om3 Multimode, Aqua, Push Pull Uniboot Connector, Polarity A, For Cxp Cfp 100g Transceiver

MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high density networking and used in data center, telecom and backbone application for 100G connectivity. 100G parallel optics transceivers (100GBASE-XR10) can support 10x10G modes this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. 24 fiber MPO to LC Fan out Assemblies provide connections between single CFP/CXP (100G transceiver with MPO interface) and 12 x SFP+ (10G transceivers with LC Duplex Interface). FEATURES•       Lower Insertion Loss & Higher Performance•       Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942•       Low IL and stable signal transmission ensuring your n..

24 Fiber Sm Mtp Lc Break Out Cable, 24f Mtp Female to 12 X Lc Duplex Fan Out / Harness Cable, Low Loss OFNR (Riser), G.657A1 Single Mode, Yellow, Polarity A, For Cxp Cfp 100g Transceiver

MTP breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MTP harness cables reduce the overall cost and setup time for complex high density networking and used in data center, telecom and backbone application for 100G connectivity. 100G parallel optics transceivers (100GBASE-XR10) can support 10x10G modes this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. 24 fiber MTP to LC Fan out Assemblies provide connections between single CFP/CXP (100G transceiver with MTP interface) and 10 x SFP+ (10G transceivers with LC Duplex Interface). FEATURES•       Lower Insertion Loss & Higher Performance•       Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942•       Low IL and stable signal transmission ensuring your netwo..

12 Fiber Mm Om3 Mtp Lc Break Out Cable, 12f Mtp Female to 4 X Lc Duplex Fan Out / Harness Cable, Low Loss OFNP (Plenum), Om3 Multimode, Aqua, Polarity B, For Sr4 40g 100g Transceiver

MTP breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MTP harness cables reduce the overall cost and setup time for complex high density networking and used in data center, telecom and backbone application for 40G / 100G connectivity. 40G parallel optics transceivers (40GBASE-XR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. 8 Fiber MTP QSFP+ to SFP+ Fan out Assemblies provide connections between single QSFP+ (40G transceiver with MTP interface) and 4 x SFP+ (10G transceivers with LC Duplex Interface). FEATURES•       Lower Insertion Loss & Higher Performance•       Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942•       Low IL and stable signal transmission ensuring your..

12 Fiber Mm Om4 Mtp Lc Break Out Cable, 12f Mtp Female to 4 X Lc Duplex Fan Out / Harness Cable, Low Loss OFNP (Plenum), Om4 Multimode, Aqua, Polarity B, For For Sr4 100g 400g Transceiver

MTP breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MTP harness cables reduce the overall cost and setup time for complex high density networking and used in data center, telecom and backbone application for 40G / 100G connectivity. 40G parallel optics transceivers (40GBASE-XR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. 8 Fiber MTP QSFP+ to SFP+ Fan out Assemblies provide connections between single QSFP+ (40G transceiver with MTP interface) and 4 x SFP+ (10G transceivers with LC Duplex Interface). FEATURES•       Lower Insertion Loss & Higher Performance•       Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942•       Low IL and stable signal transmission ensuring your..

12 Fiber Sm Mtp Lc Break Out Cable, 12f Mtp Female to 4 X Lc Duplex Fan Out / Harness Cable, Low Loss OFNR (Riser), G.657A1 Single Mode, Yellow, Polarity B, For Psm4/Lr4/Fr4/Dr4 Transceiver

MTP breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MTP harness cables reduce the overall cost and setup time for complex high density networking and used in data center, telecom and backbone application for 40G / 100G connectivity. 40G parallel optics transceivers (40GBASE-XR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. 8 Fiber MTP QSFP+ to SFP+ Fan out Assemblies provide connections between single QSFP+ (40G transceiver with MTP interface) and 4 x SFP+ (10G transceivers with LC Duplex Interface). FEATURES•       Lower Insertion Loss & Higher Performance•       Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942•       Low IL and stable signal transmission ensuring your..

24 Fiber Mm Om3 Mtp Lc Break Out Cable, 24f Mtp Female to 12 X Lc Duplex Fan Out / Harness Cable, Low Loss OFNP (Plenum), Om3 Multimode, Aqua, Polarity A, For Cxp Cfp 100g Transceiver

MTP breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MTP harness cables reduce the overall cost and setup time for complex high density networking and used in data center, telecom and backbone application for 100G connectivity. 100G parallel optics transceivers (100GBASE-XR10) can support 10x10G modes this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. 24 fiber MTP to LC Fan out Assemblies provide connections between single CFP/CXP (100G transceiver with MTP interface) and 10 x SFP+ (10G transceivers with LC Duplex Interface). FEATURES•       Lower Insertion Loss & Higher Performance•       Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942•       Low IL and stable signal transmission ensuring your netwo..

24 Fiber Mm Om4 Mtp Lc Break Out Cable, 24f Mtp Female to 12 X Lc Duplex Fan Out / Harness Cable, Low Loss OFNP (Plenum), Om4 Multimode, Aqua, Polarity A, For Cxp Cfp Qsfp-dd 100g 400g Transceiver

MTP breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MTP harness cables reduce the overall cost and setup time for complex high density networking and used in data center, telecom and backbone application for 100G connectivity. 100G parallel optics transceivers (100GBASE-XR10) can support 10x10G modes this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. 24 fiber MTP to LC Fan out Assemblies provide connections between single CFP/CXP (100G transceiver with MTP interface) and 10 x SFP+ (10G transceivers with LC Duplex Interface). FEATURES•       Lower Insertion Loss & Higher Performance•       Complied to ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942•       Low IL and stable signal transmission ensuring your netwo..

Track Order