JTOPTICS® 10Gb/s transceiver module supports up to 10km link lengths over LC duplex SMF fiber. Digital diagnostics monitoring is available via a 2 wire serial interface, as specified in SFF 8472. Each SFP+ transceiver module is individually tested to be used on a series of Cisco switches, rout..
JTOPTICS®
10Gb/s (JT 10G SFPP RJ) standards as specified in IEEE Std 802.3. 10GBASE T SFP+
copper transceivers use the SFP's RX_LOS pin for link indication. If pull up SFP's
TX_DISABLE pin, PHY GBASE T SFP+ copper transceivers are based on the SFP Multi
Source Agreement (MSA). They are compatible wi..
JTOPTICS®
SFPP 10GBASE LR SFP+ transceiver supports up to 20km link lengths over LC duplex
SMF fiber. Digital diagnostics monitoring is available via a 2 wire serial interface,
as specified in SFF 8472. Each SFP+ transceiver module is individually tested to
be used on a series of Cisco switches, rou..
Hot
JTOPTICS® 10GBASE SR 300m SFPP optical transceiver, 10G SFPP SR(JT 10G SFPP DD SR) SFP+ transceiver supports up to 400m link lengths over OM4 MMF (300m over OM3 MMF) via an LC duplex connector. Digital diagnostics monitoring is available via a 2 wire serial interface, as specified in SFF 8472. Each ..
JTOPTICS® SFPP 10GBASE LR SFP+ transceiver supports up to 10km link lengths over LC duplex SMF fiber. Digital diagnostics monitoring is available via a 2 wire serial interface, as specified in SFF 8472. Each SFP+ transceiver module is individually tested to be used on a series of Cisco switches, rou..
JTOPTICS®
10GBASE ZR SFP+ transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers
designed for use in 10 Gigabit multi rate links up to 100km of G.652 single mode
fiber. They support 10G Ethernet ZR and 10G Fibre Channel. Digital diagnostics functions
are available via a 2 wire seria..
JTOPTICS® Trunk cable assemblies are composed of high-quality OFNP
jacketed fiber optic cables used in data centers, telecom, and backbone
applications for 400G / 800G connectivity. MPO Trunk Cables are built with the
highest quality components. 16 Fiber OM4 MPO Cable 16F MPO Female to 16F MPO
F..
JTOPTICS® Trunk cable
assemblies are composed of high-quality OFNP jacketed fiber optic cables used
in data centers, telecom, and backbone applications for 400G / 800G
connectivity. MPO Trunk Cables are built with the highest quality components.
16 Fiber OM5 MPO Cable 16F MPO Female to 16F MPO F..
JTOPTICS breakout cable assemblies are composed of high quality OFNP jacketed fiber optic cables used in data center, telecom and backbone application for 400G / 800G connectivity.
16 Fiber MPO harness patch cord assemblies are used to interconnect QSFP-DD and QSFP-DD800 transceivers. QSFP-DD to 8..
JTOPTICS® 200G QSFP56 Breakout AOC is a QSFP56 VCSEL-based (Vertical Cavity Surface-Emitting Laser), cost effective 200Gb/s to 4 x 50Gb/s active optical splitter cable (AOC) designed for use in 200Gb/s Ethernet and InfiniBand HDR (High Data Rate) systems. It is compliant with SFF-8665 for the QSFP56..
-to-4-x-12f-mpo-(f)--om5-distribution-cable-300x300.png "48 Fiber Multimode Om5 Breakout Mpo Trunk Cable 4 x 12F Mpo (F) to 4 x 12F Mpo (F) Om5 Distribution Cable")
JTOPTICS® 48 core MPO/MTP Trunk Fiber Optic Cable ribbon and trunk mulitcore cable assemblies facilitate rapid deployment of high-density backbone cabling in data centers and other high fiber environment, reducing network installation or reconfiguration time and cost. MTP/MPO are used to interconnec..
New
The HPE Aruba Q9S72A is a versatile 100G DAC (Direct Attach Copper) breakout cable designed for efficient connectivity in high-performance networking environments. It features a QSFP28 connector on one end that splits into four QSFP28 connectors, allowing seamless connections between a 100G device a..