
SPECIFICATIONS | |
Connector | CS to CS |
Insertion Loss | ≤0.2dB |
Polish | UPC to UPC |
Wavelength | 1310/1550nm |
Jacket Material | LSZH |
Return Loss | ≥55dB |
Jacket OD | 2.0mm |
Operating Temp Range | -40~70°C |
Polarity | A(Tx) to B(Rx) |
Minimum Bend Radius | 10D (installed) - 20D (loaded) |
Fiber Type | 9/125μm, SM G652D |
Jacket Color | Yellow |
Storage Temp Range | -45~85°C |
Cable Retention | 90N |
Strength Member | Aramid |
Enhanced optical performance to meet telecom requirement
Cable with IEC 60332-3-24 fire
performance
IEC, EIA/TIA and Telcordia compliant
RoHS, REACH and SvHC compliant
High-quality connectors and Zirconia
Ceramic Ferrule
Low insertion Loss and High Return Loss
Enhanced optical performance to meet
telecom requirement.
Comply to TIA/EIA, FOCIS10, GR-326
EIA/TIA-604-10, IEC61754-20 and JIS C5973
- Stock: In Stock
- Model: JTPCCSPCSPOS2DXLZXXUBP
- MPN: JTPCCSPCSPOS2DXLZXXUBP
Available Options
JTOPTICS® High Quality 4F CS - CS Fiber Patch Cord uses Senko’s new CS connector which is specifically designed for Data Centre 400G optimization. To accommodate the “lightspeed” upgrades currently taking place in hyperscale DCs, the reduced size CS Connector is not only capable of delivering low insertion and high return loss comparable to existing LC connectors, but with significantly reduced footprint.
JTOPTICS® CS connector meets the requirement for 2x100G/200G CWDM4 transceivers requiring two pairs of TX/RX. Our CS Cable Assembly support next-generation 200/400 Gbps QSFP-DD and OSFP transceivers with optimized performance and comply with TIA 604 (FOCIS), IEC 61754 and YD/T industry standards.
SPECIFICATIONS | |
Connector | CS to CS |
Insertion Loss | ≤0.2dB |
Polish | UPC to UPC |
Wavelength | 1310/1550nm |
Jacket Material | LSZH |
Return Loss | ≥55dB |
Jacket OD | 2.0mm |
Operating Temp Range | -40~70°C |
Polarity | A(Tx) to B(Rx) |
Minimum Bend Radius | 10D (installed) - 20D (loaded) |
Fiber Type | 9/125μm, SM G652D |
Jacket Color | Yellow |
Storage Temp Range | -45~85°C |
Cable Retention | 90N |
Strength Member | Aramid |