-50 %
-50 %
JTOPTICS® 400G QSFP-DD AOC (active optical cable) is a 400 Gb/s parallel active optical cable, which transmits parallel 8×50 Gb/s PAM4 signals over multi-mode fiber (MMF) cables up to 100m. It is compliant with QSFP-DD MSA and the CMIS 4.0. The 400G QSFP56-DD AOC cables supports eight electrical int..
-50 %
-50 %
JTOPTICS 400G OSFP DAC (Passive Direct Attach Copper) enables high bandwidth 400G links and supports 400G Ethernet rate. It is high-speed, cost-effective alternatives to fiber optics in 400G Ethernet applications. The 400G OSFP DAC cable contains 16 high-speed copper pairs, each operating at data ra..
Hot
-50 %
-50 %
JTOPTICS Fiber Optical Attenuator is used in fiber optic communications to reduce optical fiber power at a certain level. The most commonly used type is female to male plug type fiber optic attenuator, and it has male fiber Connector at one side and the other side is a female type fiber optic adapt..
-50 %
-50 %
JTOPTICS Fiber Optical Attenuator is used in fiber optic communications to reduce optical fiber power at a certain level. The most commonly used type is female to male plug type fiber optic attenuator, and it has male fiber Connector at one side and the other side is a female type fiber optic adapt..
-50 %
-50 %
JTOPTICS Fiber Optical Attenuator is used in fiber optic communications to reduce optical fiber power at a certain level. The most commonly used type is female to male plug type fiber optic attenuator, and it has male fiber Connector at one side and the other side is a female type fiber optic adapt..
-50 %
-50 %
JTOPTICS Fiber Optical Attenuator is used in fiber optic communications to reduce optical fiber power at a certain level. The most commonly used type is female to male plug type fiber optic attenuator, and it has male fiber Connector at one side and the other side is a female type fiber optic adapt..
-40 %
-40 %
JTOPTICS MPO breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. JTOPTICS MPO harness cables reduce the overall cost and setup time for complex high-density networking and used in data center, telecom and backbone applicat..
-35 %
-35 %
JTOPTICS
OSFP 2*FR4 transceiver is a high-quality optical transceiver designed for 800
Gigabit Ethernet links over 2 km of single-mode fiber. This 800G FR 2km
transceiver features 8 independent electrical input/output channels, each
operating at speeds up to 106.25 Gbps. Comprising two transmitter/r..
-35 %
-35 %
JTOPTICS
800GBASE-2LR4 OSFP transceiver supports link lengths of up to 10 km over
single-mode fiber (SMF) via dual LC connectors. It complies with IEEE 802.3ck,
OSFP MSA, and CMIS Rev 5.0 standards. The transceiver features built-in digital
diagnostics monitoring (DDM) for real-time access to operat..
-35 %
-35 %
JTOPTICS® 800G OSFP DR8 InfiniBand NDR and Ethernet transceiver is a high-quality optical transceiver designed for
800 Gigabit Ethernet links over 500 meters of single-mode fiber. It features 8
independent electrical input/output channels, each operating at speeds up to
106.25 Gbps. T..
-35 %
-35 %
800G Osfp Optical Transceiver 800Gbase-Sr8 Osfp Pam4 850Nm 100M Dom 2xMtp®/Mpo-12 Mmf Optical Module
JTOPTICS® 800G OSFP SR8 100m InfiniBand NDR and Ethernet Transceiver is a high-quality optical module designed for
utilization in 800 Gigabit Ethernet links over multimode fiber. The module
features 8 independent electrical input/output channels, operating at
106.25Gbps per channel. This t..
-60 %
-60 %
The Arista AOC-D-D-400G is a 400G Active Optical Cable (AOC) designed for high-speed data transfer between QSFP-DD (Quad Small Form-Factor Pluggable Double Density) ports. Utilizing OM3 multimode fiber, it supports 400Gbps Ethernet for short-range connections in data centers and high-performance net..