Your shopping cart is empty!
Your shopping cart is empty!
JTOPTICS® 400Gbps LR4 transceiver module is a 400Gb/s Quad Small Form Factor Pluggable double density (QSFP DD) optical module designed for 10km optical communication applications. The module converts 8 channels of 50Gb/s (PAM4) electrical input data to 4 channels of CWDM optical signals, and multiplexes them into a single channel for 400Gb/s optical transmission. Reversely, on the receiver side, the module optically de multiplexes a 400Gb/s optical input into 4 channels of CWDM optical signals, and converts them to 8 channels of 50Gb/s (PAM4) electrical output data. The module offers very high functionality and feature integration, accessible via a two wire serial interface.QSFP DD MSA and CMIS compliant Compliant to 400G LR4 Technical Specification 8x53.125Gbit/s PAM4 electrical interface(400GAUI 8) 4x106.25Gbps(53.125GBd PAM4)Optics architecture Power consumption <12W Maximum link length of 10Km G.652 SMF with KP FEC Full Duplex LC connector&nb..
₹ 111,864.00 Ex Tax: ₹ 94,800.00
JTOPTICS® 400Gb/s FR4 transceiver module is designed for high speed, long range 400 Gigabit Ethernet applications of up to 400 gigabits per second. The JT QSFP 400G FR4 is offered with optical LC Duplex Connector. This module utilizes the 400GBASE FR4 technology for transmission. With this transceiver, two Ethernet switches can be connected through two single mode fiber cores. The JT QSFPDD 400G FR4 supports a transmission distance of up to 2 kilometers. It is compliant to IEEE 802.3bs, 400GBASE FR4 Spec of 100G Lambda MSA group, and 400GAUI 8/CEI 56G VSR PAM4 standards.4 channels full duplex transceiver modulesTransmission data rate up to 100Gbps per channel4x100Gbps PAM4 transmitter and PAM4 receiverCompliant with IEEE 802.3bs standard4 channels 1310nm EML arrayInternal CDR circuits on both receiver and transmitterPower consumption < 10WReach up to 2 Km SMFLC connector receptacleBuilt in digital diagnostic functionsOperating case temperature range 0°C to +70°C3.3V power supp..
₹ 111,864.00 Ex Tax: ₹ 94,800.00
JTOPTICS® QSFPDD 400GBASE DR4 is offers a transmission distance of up to 500 meter over a single mode fiber link. Quad Small Form Factor Pluggable Double Density (QSFP DD) transceiver with optical MPO 12/MTP 12 connector is designed for long range single mode 400 Gigabit Ethernet (400GbE) high speed applications of up to 400 gigabits per second. The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane. It can be used as 4x100G breakout to QSFP28 DR 100G. It supports link lengths of up to 500m parallel SMF with MTP/MPO 12 connector. It is compliant to QSFP DD MSA, IEEE 802.3bs protocol and 400GAUI 8 standards. It can be used as 4x100G breakout to QSFP28 DR 100G..QSFP DD MSA and CMIS compliant Compliant to 802.3bs 400GBASE DR4 8x53.125Gbit/s PAM4 electrical interface(400GAUI 8) 4x106.25Gbps(53.125GBd PAM4) Optics architecture Power consumption <10W Maximum link length of 500m G.652 SMF with KP FEC&n..
₹ 108,111.60 Ex Tax: ₹ 91,620.00
JTOPTICS® 400GBASE SR8 100m is designed to operate over multimode fiber systems using a nominal wavelength of 850nm (MMF). It is compliant with the QSFP28 MSA and IEEE 802.3bm 100GBASE SR4. It integrates eight data lanes in each direction with 8x26.5625G. The electrical interface uses a 76 contact edge type connector. The optical interface uses a 16 fiber MTP (MPO) connector.It is compliant to IEEE 802.3bs protocol and 400GAUI 8/CEI 56G VSR PAM4 standard. 8 channels full duplex transceiver modules Transmission data rate up to 53Gbps per channel 8x53Gbps PAM4 transmitter and PAM4 receiver 8 channels 850nm VCSEL array 8 channels PIN photo detector array Internal CDR circuits on both receiver and transmitter Power consumption <8.5W Hot Pluggable QSFP DD form factor Max. link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC MPO 16 APC connector receptacle&n..
₹ 50,740.00 Ex Tax: ₹ 43,000.00
