AOC Cable

AOC Cable

JTOPTICS® Active Optical Cable (AOC) cable assemblies are designed to meet data center, networking and high-performance computing application needs for a high-density cabling interconnect system. We can customize the cable compatibility for major brands like Cisco, Juniper, Arista, Dell, HPE, Extreme, Brocade, Mellanox, H3C, Intel, IBM, Nokia, Zte, Ciena, Huawei, Ixia etc.



Show:
Sort By:

JTOPTICS 800G AOC Cable QSFP-DD to QSFP-DD Active Optical Cable OM3 Multimode cable

JTOPTICS® 800G QSFP-DD AOC (active optical cable) is a 800 Gb/s parallel active optical cable, which transmits parallel 8×100 Gb/s PAM4 signals over multi-mode fiber (MMF) cables up to 30m. It is compliant with QSFP-DD MSA. The 800G QSFP-DD AOC cables supports eight electrical interface lanes, each of which operate in the data rate of 106.25G/s, with an overall aggregate bandwidth up to 850Gb/s. These modules of cables are designed to operate over multi-mode fiber systems using a nominal wavelength of 850nm. This cable is compliant with IEEE 802.3ck, QSFP-DD HW Specification Rev 6.3, and CMIS Rev 5.0. The built-in digital diagnostics monitoring (DDM) allows access to real-time operating parameters.Hot-pluggable QSFP-DD AOC assemblies8x 100G PAM4 electrical interface8x 100G PAM4 optical interfaceData rate up to 106.25Gbps per channelCompliant with QSFP-DD MSA, CMIS and IEEE 802.3Low power dissipationCommercial Case Temperature 0°C to 70°CSingle 3.3V power supplyBuilt-in digital diagnost..

₹ 142,662.00 Ex Tax: ₹ 120,900.00

JTOPTICS 200G AOC Cable QSFP56 to 2xQSFP28 Active Optical Cable 1 Meter OM3 Multimode cable

JTOPTICS® 200G QSFP28-DD Breakout AOC is a QSFP56 VCSEL-based (Vertical Cavity Surface-Emitting Laser), cost effective 200Gb/s to 2 x 100Gb/s active optical splitter cable (AOC) designed for use in 200G/2x100G Ethernet and InfiniBand EDR applications. It is compliant with QSFP28 and QSFP-DD MSA specifications. It provides connectivity between system units with a 200Gb/s QSFP-DD connector on one side and two separate 100Gb/s QSFP28 connectors on the other side, such as link between a switch and two servers. The cable connects data signals of 8x25G NRZ from one single QSFP-DD end to two QSFP28 ends, which operates 4 x25G NRZ signals each.Hot Pluggable QSFP-DD and QSFP28 MSA Compliant4-channel 850nm VCSEL array and PIN photo-detector arraySupports 200G to 2x 100G Ethernet Interoperability8x 25G NRZ electrical interface8x 25G NRZ optical interfaceData rate up to 25.78125Gbps per channel.Compliant with QSFP-DD MSA, CMIS and IEEE 802.3Low power dissipationMax. Power Consumption 4WCommercial ..

₹ 62,882.20 Ex Tax: ₹ 53,290.00

JTOPTICS 200G AOC Cable QSFP56 to 4xSFP56 Active Optical Cable 1 Meter OM3 Multimode cable

JTOPTICS® 200G QSFP56 Breakout AOC is a QSFP56 VCSEL-based (Vertical Cavity Surface-Emitting Laser), cost effective 200Gb/s to 4 x 50Gb/s active optical splitter cable (AOC) designed for use in 200Gb/s Ethernet and InfiniBand HDR (High Data Rate) systems. It is compliant with SFF-8665 for the QSFP56 MSA specifications. It provides connectivity between system units with a 200Gb/s QSFP56 connector on one side and four separate 50Gb/s SFP56 connectors on the other side, such as a link between a switch and two servers. The cable connects the data signals of 4x50G PAM4 from one single QSFP56 end to four SFP56 ends, each of which transmit 2x50G PAM4 signals.Hot-pluggable QSFP56 form factor full-duplex transceiver assembly4-channel 850nm VCSEL array and PIN photo-detector arrayData rate up to 53.125Gbps (26.5625GBd PAM4) per channel.Supports 200G to 4x 50G Ethernet Interoperability200GAUI-4 electrical interfaceCompliant with QSFP56 MSA, CMIS 4.0 and IEEE 802.3cd 200GBASE-SR4Built-in 200G PAM4..

₹ 324,358.40 Ex Tax: ₹ 274,880.00

JTOPTICS 200G AOC Cable QSFP56 to QSFP56 Active Optical Cable 1 Meter OM3 Multimode cable

JTOPTICS® 200G QSFP56 AOC is a QSFP56 VCSEL (Vertical Cavity Surface-Emitting Laser) based active optical cable (AOC) designed for use in 200Gb/s Ethernet or InfiniBand HDR systems. The 200G QSFP56 AOC offers high-end port density and configurability, and a much longer reach than passive copper cables in the data centers. 200G QSFP56 AOC has a standard SFF-8665 compliant QSFP56 port on the electrical side towards the host system. It contains four channels multi-mode fibers (MMF) optic transceivers per end, each channel of transceivers operates data rates up to 50Gb/ with PAM4 modulated signals (4x 50G PAM4). Assembled with fixed length of fiber cable, the AOC is easy to install and replace. Hot-pluggable QSFP56 form factor full-duplex transceiver assembly4-channel 850nm VCSEL array and PIN photo-detector arrayData rate up to 53.125Gbps (26.5625GBd PAM4) per channel.200GAUI-4 electrical interfaceCompliant with QSFP56 MSA, CMIS 4.0 and IEEE 802.3cd 200GBASE-SR4Compliant with IEEE 80..

₹ 42,008.00 Ex Tax: ₹ 35,600.00

JTOPTICS 400G AOC Cable QSFP-DD to QSFP-DD Active Optical Cable 1 Meter OM3 Multimode cable

JTOPTICS® 400G QSFP-DD AOC (active optical cable) is a 400 Gb/s parallel active optical cable, which transmits parallel 8×50 Gb/s PAM4 signals over multi-mode fiber (MMF) cables up to 100m. It is compliant with QSFP-DD MSA and the CMIS 4.0. The 400G QSFP56-DD AOC cables supports eight electrical interface lanes, each of which operate in the data rate of 53.125G, with an overall aggregate bandwidth up to 425Gb/s. These modules of cables are designed to operate over multi-mode fiber systems using a nominal wavelength of 850nm.The electrical interface uses a 76 contact edge type connector. This active optical cable is compliant with IEEE 802.3cd, OIF-CEI-04.0, QSFP-DD MSA, and QSFP-DD-CMIS-rev4p0.Hot-pluggable QSFP-DD active optical cable assemblies8x 50G PAM4 electrical interface8x 50G PAM4 optical interfaceData rate up to 53.125Gbps per channel.8-channels 850nm VCSEL array and PIN photo-detector arrayCompliant with QSFP-DD MSA, CMIS and IEEE 802.3Low power dissipationCompliant with IEEE..

₹ 77,608.60 Ex Tax: ₹ 65,770.00

JTOPTICS 400G AOC Cable QSFP-DD to 4xQSFP28 Active Optical Cable 1 Meter OM3 Multimode cable

JTOPTICS® 400G QSFP-DD Breakout AOC (Active Optical Cable) assemblies include 400G QSFP-DD to 4x 100G QSFP56 breakout AOC. The module integrates eight parallel lanes on 400G end and fan-out to four parallel lanes on each 100G end. Each lane operate 53.125Gb/ps PAM4 modulation signal. These 400G parallel breakout Active Optical Cable (AOC) assemblies transmit parallel 8x 50G PAM4 signals over multi-mode fiber (MMF) cables up to 100m. Compliant with QSFP-DD/SFP MSA and CMIS 4.0. they are designed with high performance, high density and low power, which are suitable for short range interconnection for data center, high-performance computing networks,Hot-pluggable QSFP-DD/QSFP28 form factor full-duplex transceiver assembly8-channels 850nm VCSEL array and PIN photo-detector arrayData rate up to 53.125Gbps (26.5625GBd PAM4) per channel400GAUI-8 and 100GAUI-2 electrical interfacesCompliant with QSFP-DD MSA, CMIS 4.0 and IEEE 802.3cm 400GBASE-SR8Compliant with InfiniBand HDR/HDR100MMF cable wi..

₹ 124,431.00 Ex Tax: ₹ 105,450.00

JTOPTICS 400G AOC Cable QSFP-DD to 2xQSFP56 Active Optical Cable OM3 Multimode cable

JTOPTICS® 400G QSFP-DD Breakout AOC (Active Optical Cable) assemblies include 400G QSFP-DD to 2x 200G QSFP56 breakout AOC. The module integrates eight parallel lanes on 400G end and fan-out to  two parallel lanes on each 200G end. Each lane operate 53.125Gb/ps PAM4 modulation signal. These 400G parallel breakout Active Optical Cable (AOC) assemblies transmit parallel 8x 50G PAM4 signals over multi-mode fiber (MMF) cables up to 100m. Compliant with QSFP-DD/SFP MSA and CMIS 4.0. They are designed with high performance, high density and low power, which are suitable for short range interconnection for data center, high-performance computing networks.Hot-pluggable QSFP-DD/QSFP56 form factor full-duplex transceiver assembly8-channels 850nm VCSEL array and PIN photo-detector arrayData rate up to 53.125Gbps (26.5625GBd PAM4) per channel.400GAUI-8 and 200GAUI-4 electrical interfacesCompliant with QSFP-DD MSA, CMIS 4.0 and IEEE 802.3cm 400GBASE-SR8Compliant with QSFP56 MSA and IEEE 802.3cd..

₹ 166,498.00 Ex Tax: ₹ 141,100.00

JTOPTICS 400G AOC Cable QSFP-DD to 8xSFP56 Active Optical Cable 1 Meter OM3 Multimode cable

JTOPTICS® 400G QSFP-DD to 8x50G SFP56 breakout active optical cables operate over multi-mode fibers (MMF). This breakout cable is compliant with QSFP-DD MSA/SFP28 MSA and IEEE 802.3cd Standards. Thin and lightweight AOC cables simplify cable management, enabling an efficient system airflow, which is critical in high-density racks. It is used extensively in cloud and supercomputers due to its low cost, high-value proposition, and increased reliability.JTOPTICS 400G QSFP-DD to 8x 50G SFP56 Breakout AOC (Active Optical Cable) assemblies are designed to support 400G/4x50G Ethernet and InfiniBand HDR/HDR100, suitable for data center and HPC (High-Performance Computing) links up to 100m over multi-mode fiber.Hot Pluggable QSFP-DD and SFP56 MSA Compliant8-channels 850nm VCSEL array and PIN photo-detector arrayData rate up to 53.125Gbps (26.5625GBd PAM4) per channel.400GAUI-8 electrical interfacesCompliant with QSFP-DD MSA, CMIS 4.0 and IEEE 802.3cm 400GBASE-SR8Supports 400G to 8x 50G Ethernet..

₹ 401,164.60 Ex Tax: ₹ 339,970.00

JTOPTICS 100G AOC Cable QSFP28 to QSFP28 Active Optical Cable 1 Meter OM3 Multimode cable

JTOPTICS® 100G QSFP28 AOC is a 4x25Gb/s active optical cable, which is designed for 100G Ethernet (100GbE) and InfiniBand FDR/EDR applications. They are composed of QSFP28 transceivers in both ends and OM3(OM4) multi-mode fiber cable. It has four channels in each direction with 100Gb/s total bandwidth. Each channel operates up to 25Gb/s. The 100G QSFP28 AOC cables is fully compliant with QSFP28 MSA of IEEE 802.3bm 100GBASE-SR4 and CAUI-4 specifications. With lighter weight and smaller bend radius, the 100G QSFP28 AOC cables provide an ideal alternative solution for the 100G QSFP28 DAC (passive direct attach copper cables) and QSFP28 transceivers in high-performance computing (HPC), data center and storage networks applications.4 channels full-duplex transceiver modules Supports 100Gbps total data rate. 4 channels 850nm VCSEL array 4 channels PIN photo detector array MMF cable with customizable length up to 70m (OM3) 4x 25G NRZ electrical interface4x 25G NRZ opt..

₹ 9,381.00 Ex Tax: ₹ 7,950.00

JTOPTICS 100G AOC Cable QSFP28 to 4xSFP28 Breakout Active Optical Cable 1 Meter OM3 Multimode cable

JTOPTICS® 100G QSFP28 breakout AOC (active optical cable) is designed for the interconnection between 100G Ethernet (100GbE) and 4x 25G Ethernet (25GbE). The QSFP28 to 4x SFP28 AOC cable is also known as 100G QSFP28 hybrid optical cable, 100G QSFP28 splitter AOC or 100G QSFP28 Fan-out AOC. The 100G QSFP28 breakout AOC offers four parallel, bi-directional channels each operating at up to 25 Gbps. Using industry-leading COB technology and high-performance optical engine of VCSEL laser and OM3 multi-mode fiber, this AOC breakout cables provide a highly cost-effective and low-power consumption connectivity for the high-performance computing (HPC), data center and storage networks applications. Hot Pluggable QSFP28 and SFP28 MSA Compliant4 channels full-duplex transceiver modules Supports 100Gbps total data rate. 4 channels 850nm VCSEL array 4 channels PIN photo detector array MMF cable with customizable length up to 70m (OM3) Electrical interface compliant to ..

₹ 16,862.20 Ex Tax: ₹ 14,290.00

JTOPTICS 40G AOC Cable QSFP+ to QSFP+ Active Optical Cable 1 Meter OM3 Multimode cable

JTOPTICS® 40G QSFP+ AOC (Active Optical Cable) cables are compliant with 40G QSFP+ MSA, they are designed to support 40G Ethernet and InfiniBand SDR/DDR/QDR. The 40G QSFP+ AOC integrated 4x10Gb/s data in one single OM3/OM4 cable with smart optics design. Compared to the connection between 2 QSFP+ transceivers and MPO/MPT cables. The 40G QSFP+ AOC uses COB technology and assembled with 40G optical engine for lower cost and power consumption. It is an ideal optical interconnect solution for large data centers, cloud computing and other applications that require large amounts of high-speed data transmission.Hot-pluggable QSFP+ AOC assemblies4x 10G NRZ electrical interface4x 10G NRZ optical interfaceData rate up to 10.3125Gbps per channelCompliant with QSFP+ MSA, 40GBASE-SR4 Ethernet and InfiniBand QDR850nm VCSEL laser • PIN photodetector. Low power consumption < 1W per end Compliant with InfiniBand QDR Length up to 100m using OM3 MMF  Operating case temp. range..

₹ 8,295.40 Ex Tax: ₹ 7,030.00

JTOPTICS 40G AOC Cable QSFP+ to 4xSFP+ Active Optical Cable 1 Meter OM3 Multimode cable

JTOPTICS® 40G QSFP+ AOC (active optical cables) breakout cables are designed for interconnection between the network equipment with QSFP+ ports and 10G SFP+ ports. QSFP+ AOC breakout cables could also be called QSFP+ splitter AOC or QSFP+ Fan-out AOC cables. The QSFP+ to 4x SFP+ breakout AOC offers four parallel bi-directional channels which operating at 10.3125 Gbps. It is built one end with one 40G QSFP+ module and the other ends with 4 10G SFP+ modules, which are connected with fixed length OM3/OM4 fiber cables. It is lighter, softer and more flexible than QSFP+ copper breakout cables, making it ideal for installation in tight spaces and over longer distances. Hot-pluggable QSFP+/SFP+ form factor full-duplex AOC assembly 4-channel 850nm VCSEL and PIN photo-detector.Data rate up to 10.3125Gbps per channel.Compliant with QSFP+ MSA (SFF-8436) and SFP+ MSA (SFF-8431) Compliant with SFF-8432 and SFF-8472 Compliant with IEEE 802.3ba 40GBASE-SR4 and IEEE 802.3ae 10GBASE..

₹ 13,381.20 Ex Tax: ₹ 11,340.00

JTOPTICS 25G AOC Cable SFP28 to SFP28 Active Optical Cable 1 Meter OM3 Multimode cable

JTOPTICS® 25G SFP28 AOC (Active Optical Cable) is a SFP28 MSA compliant, low power consumption and lightweight solution for 25G high speed interconnect applications over multi-mode fibers. It meets 25G Ethernet, InfiniBand EDR and CPRI/eCPRI protocols and is widely used in data centers, HPC (High-performance computing) and 5G fronthaul applications. The 25G SFP28 AOC cables provide an ideal alternative option to SFP28 direct attach copper cables (DAC) and SFP28 optical transceiver connections of short reach. The 25G SFP28 AOC cables are composed of SFP28 optical transceivers at both ends and OM3 or OM4 multi-mode fiber cable of different cable lengths. Hot-pluggable SFP28 AOC assemblies1x 25G NRZ electrical interface1x 25G NRZ optical interfaceData rate up to 25.78125Gbps per channel.Compliant with SFP28 MSA, 25GBASE-SR Ethernet and InfiniBand EDR850nm VCSEL laser • PIN photodetector. Low power consumption < 1W per end Compliant with InfiniBand QDR Length up to 3..

₹ 4,283.40 Ex Tax: ₹ 3,630.00

JTOPTICS 50G AOC Cable SFP56 to SFP56 Active Optical Cable 1 Meter OM3 Multimode cable

50G SFP56 Active Optical Cables (AOCs) are direct-attach fiber assemblies with SFP56 connectors, compliant with 50G Ethernet IEEE 802.3ba 56GBASE-SR standard. They are suitable for short distances and offer a cost-effective solution to connect within racks and across adjacent racks. The length is up to 70 meters using OM3 MMF. The 50G SFP56 AOC is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 20-contact edge type connector. Hot-pluggable SFP56 form-factor connectorsFull-duplex active optical cables850nm VCSEL array and PIN photo-detector arrayInternal CDR circuits on both receiver and transmitter channelsSupport CDR bypassCompliant with SFP56 MSA and IEEE 802.3cd 50GBASE-SRData rate up to 53.125GbpsPower consumption < 2W per endLength up to 70m (OM3) or 100m (OM4) over MMFOperating case temperature range from 0°C to 70°C3.3V power supply voltageRoHS compliant (lead free)..

₹ 125,516.60 Ex Tax: ₹ 106,370.00

JTOPTICS 10G AOC Cable 10GBASE-CR SFP+ Active Optical Cable 1 Meter OM3 Multimode cable

JTOPTICS® SFP+ Active Optical Cable (AOC) is designed to support single channel, high speed data link applications. This cable is a full duplex construction capable of transmitting data at rates up to 10Gb/s and supporting signal transmission at distances between 1m and 100m. It is fully compatible with industry standard SFF-8431 Pluggable (SFP+) interface requirements and performance. 10G SFP+ Active Optical Cables (AOCs) are direct-attach fiber assemblies with SFP+ connectors. They are suitable for short distances and offer a cost-effective solution to connect within racks and across adjacent racks. The length is up to 300 meters using OM3 MMF. SFF-8431 compliant SFP+ form-factor connectors 1x 10G NRZ electrical interface1x 10G NRZ optical interfaceHot-pluggable electrical interface Transmission data rate up to 10.3Gbps  850nm VCSEL laser • PIN photo-detector. Low power consumption < 1W per end Compliant with InfiniBand QDR Length up to..

₹ 2,466.20 Ex Tax: ₹ 2,090.00

Talk to an expert


+91-86-9309-9309

+91-79-7755-7756

Email us for expert advice


info@jtoptics.com

sales@jtoptics.com

Live Chat


Our Help Desk center is the most extensive information resource

WhatsApp


+91-8693099309

+91-9699789777

Track Order