Your shopping cart is empty!
MENU
Your shopping cart is empty!
Our media converters provide an easy and economical solution to upgrade a copper based network to fiber optic to extend the signal reach, or to bridge copper and optical fiber cabling by converting an electrical signal to an optical signal. Their plug-and-play design enables a quick and easy installation. JTOPTICS offer a large selection of professional fiber optic media converters for Fast Ethernet, Gigabit Ethernet network for different applications and environment.
JTOPTICS Power over Ethernet (PoE) is a technology that enables the safe transfer of Direct Current (DC) electrical power along with data over standard network cabling. Both the data and the power may share the same wire, and each is independent and unaffected by the other. PoE media converters function like other media converters that convert copper to fiber, but they also inject power over the UTP cabling.
Industrial Ethernet Media Converters address the need for transparently connecting 10/100 Ethernet equipment that operate in extreme temperatures to fiber optic cable. Our Media Converters will operate in industrial grade temperatures of -40F to +167F (-40C to +75C). Built-in 10/100 switch enables the fiber able connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub.FEATURES• 10/100BaseT(X) auto-negotiation and auto-MDI• Link Fault Pass-Through (LFP)• Power failure, port break alarm by relay output• -40 to 75°C operating temperature range (T models)• Designed for ..
Gigabit Industrial Fiber Media Converter is a kind of 1000Mbps intelligent adaptive gigabit Ethernet to fiber converter. Industrial media converters are specially designed for the harsh environment applications. It can convert and transmit Gigabit Ethernet networks into Gigabit fiber optic networks, and it is applied in Gigabit Ethernet as copper to fiber conversion equipment. Industrial Temperature Media Converters address the need for transparently connecting 10/100/1000 Ethernet equipment that operate in extreme temperatures to fiber optic cable. Our Media Converters will operate in industrial grade temperatures of -40F to +167F (-40C to +75C). FEATURES• 10/100/1000BaseT(X) auto-negotiation and auto-MDI• Link Fault Pass-Through (LFP)• Power failure, port break alarm by relay output• -40 to 75°C operating temperature ..
Single fiber media converter, also referred to as BiDi or simplex media converter, can make the customers to extend the Ethernet connections across a single fiber link. JTOPTICS BIDI Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port with Auto-MDIX capability for more convenient connection on single fiber. Built-in 10/100 switch enables the fiber able connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network.FEATURES• Complied with IEEE802.3 10Base-T, IEEE802.3u 100Base-T and 100Base-FX• Auto-adaptation &nb..
Gigabit Ethernet to single fiber converter can convert and transmit Gigabit Ethernet networks into Gigabit fiber optic networks on single fiber, it is used in Gigabit Ethernet as copper to fiber conversion equipment. Each Media Converter provides a 10/100/1000BaseT/TX auto-negotiating RJ-45 twisted-pair connector port with Auto-MDIX capability for more convenient connection. Built-in 10/100/1000 switch enables the fiber able connection to operate at 1000 Mbps connected to either a 10BaseT or 100BaseTX or 1000BaseTX network, while remaining completely 1000BaseFX standard-compliant. FEATURES• 10/100/1000Mbps auto-negotiation• IEEE 802.3x full-duplex flow control and back pressure half-duplex flow control• Supports MAC self-learning• Standards: Complied with IEEE802.3 10Base-T, IEEE802.3u 100Base-T IEEE802.3ab 1000Base-T a..
Ethernet to Dual fiber converter can convert and transmit Ethernet networks into fiber optic networks on dual fiber, it is used in Ethernet as copper to fiber conversion equipment. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port with Auto-MDIX capability for more convenient connection. Built-in 10/100 switch enables the fiber able connection to operate at 100 Mbps connected to either a 10BaseT or 100BaseTX network, while remaining completely 100BaseFX standard-compliantFEATURES• Complied with IEEE802.3 10Base-T, IEEE802.3u 100Base-T and 100Base-FX• Auto-adaptation &nbs..
Gigabit Ethernet to Dual fiber converter can convert and transmit Gigabit Ethernet networks into Gigabit fiber optic networks on dual fiber, it is used in Gigabit Ethernet as copper to fiber conversion equipment. Each Media Converter provides a 10/100/1000BaseT/TX auto-negotiating RJ-45 twisted-pair connector port with Auto-MDIX capability for more convenient connection. Built-in 10/100/1000 switch enables the fiber able connection to operate at 1000 Mbps connected to either a 10BaseT or 100BaseTX or 1000BaseTX network, while remaining completely 1000BaseFX standard-compliantFEATURES• 10/100/1000Mbps auto-negotiation• IEEE 802.3x full-duplex flow control and back pressure half-duplex flow control• Supports MAC self-learning• Standards: Complied with IEEE802.3 10Base-T, IEEE802.3u 100Base-T IEEE802.3ab 1000Base-T and IEEE802...
SFP based Ethernet to Fiber Converters provide an economical path to extend the distance of an existing network, the life of non-fiber based equipment, or the distance between two devices. The pluggable fiber optics port allows for flexible network configurations using SFP transceivers supplied by us or other manufacturers of MSA compliant SFPs. For steady and reliable performance it is designed in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission.FEATURES• Complied with IEEE802.3 10Base-T, IEEE802.3u 100Base-T• IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-FX• Auto-adaptation rate• Support Full/half-duplex mode at twisted pair port• &..
Single mode to Multimode Media Optical Converter is a device to conduct the transparent conversion between the media of single mode and multimode optical fiber. It is used in the applications where media conversion required between multimode segments separated by long distances. We offer different single mode to multimode media converters from 850nm to 1310nm wavelengths. Multimode to Single mode Converters provide efficient solutions for interconnecting multimode fiber LANs over longer distances by integrating single mode fiber optic cable into the LAN. The converter also enables Ethernet LAN and WAN connectivity, by providing a multimode interface to single mode fiber carrier demarcation points.FEATURES• Extend a Ethernet backbone connection up to 20 km for MAN applications• Converts Multimode to Single mode (and vice versa)• Converts Single mode to S..
2U 14 slot Rack Mount Media Converter Chassis provides higher rack mount media converter density. The chassis lets you install multiple media converters in an equipment. All the converters plugged into the chassis will share same power supply, so that they are easy to manage. 14 Slot can be used for 14 sets of 10/100M or 1000M or 10/100/1000M stand-alone media converters within a rack-mountable chassis which is supplied with unified power and simplify the structure. FEATURES• For up to 14 Single-mode and Multi-mode standalone fiber media converters• Hot Swap Support for the Converters to ensure a flexible connection• Redundant Power Supply for maximum stability and reliability• Reliable and stable performanceAPPLICATIONS• Data com Network• ..
