1 channel analog camera video with ptz data to single mode optical fiber converter, fc, 1310nm, 20km Pair
Certified Quality
Our quality policy is maintained throughout our business in accordance with our commitment to customer and regulatory requirements.
1 channel video multiplexers can simultaneously transmit 1 channels of 10-bit digitally encoded broadcast quality video and return data unidirectional or bidirectional over one single mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Our Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. These transmitter & receiver used to transmit Analog Camera Video to long distance.
| FEATURES | • 10-bit digitally encoded and non-compression broadcast quality video transmission • Directly compatible with NTSC, PAL, and SECAM CCTV camera systems • Support analog video signal • Automatic compatible PAL, NTSC and SECAM video system |
| APPLICATIONS | • CCTV • Video Transmission • Video monitor • CATV |
| SPECIFICATIONS | |
| Video Channel | 1 |
| Video Format | PAL, NTSC, SECAM |
| Bandwidth | 6.5MHZ |
| Wavelength | 1310nm/1550nm |
| Number of Data Channel | 1 Return Data |
| Optical connector | FC upc |
| Transmission Distance | 0- 20km over single mode fiber |
| Differential Gain | < 1.5% |
| Operating Temp Range | -45°C~+85 °C |
| Input/output Voltage | 1.0 Volt p-p |
| MTBF | >100,000 hours |
| Bit Resolution | 8-Bit Digital Transmission |
| Data Format | Reverse RS485 |
| Video Interface | BNC 75Ω |
| Differential Phase | < 1.5° |
| Signal-to-Noise Ratio(SNR) | > 67 dB |
| Relative Humidity | 0%~95% (Non-condensing) |
| Wall-link-type (stand-alone) | 11.1(L)×10.7(W)×2.8(H) cm |
