SPECIFICATIONS | |
CDR | TX and RX |
Connector | MTP/MPO-12 |
DDM/DOM | Supported |
Wavelength | 1310nm |
Form factor | QSFP28 |
Extinction Ratio | 3.5dB |
Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
TX Power | -9.4~2dBm |
Max Data Rate | 103.125Gbps (4x 25.78Gbps) |
Media | SMF |
Max Cable Distance | 500m |
Modulation Format | NRZ |
Power budget | 3.2dB |
Protocols | QSFP28 MSA Compliant |
Receiver Type | PIN |
Receiver Sensitivity | <-12.66dBm |
Transimitter Type | 4x DFB |
Power Consumption | 3.5W |
Transmit and Dispersion Penalty | 2.9dB |
JTOPTICS® QSFP28 100GBASE PSM4 is a Four Channel, Pluggable, Parallel, Fiber Optic transceiver support InfiniBand DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications. It integrates four data lanes in each direction with 104 Gbps bandwidth. Each lane can operate at 26Gbps up to 2km over Single mode fiber. These modules are designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector.
Hot pluggable QSFP28 form factor
4 channels full duplex transceiver module
Supports 103.1Gb/s aggregate bit rate.
Max. link length Up to 2km over single mode fiber
4 channels 1310nm DFB
4 channels PIN photo detector array
Internal CDR circuits (receiver and transmitter channels)
Support CDR bypass
Transmission data rate up to 26Gbps per channel.
Supports SM MPO/MTP 12 (APC) Connector
3.5 W maximum power dissipation
Single 3.3V power supply
Comply with IEEE 802.3bm 100G PSM4 MSA standard.
RoHS 6 compliant
All our own products can be purchased direct online or via our sales team.
E-Mail: sales@jtoptics.com
Phone: +91-8693099309 / 9699789777