OFC Media Converter

OFC Media Converter

Our media converters provide an easy and economical solution to upgrade a copper based network to fiber optic to extend the signal reach, or to bridge copper and optical fiber cabling by converting an electrical signal to an optical signal. Their plug-and-play design enables a quick and easy installation. JTOPTICS offer a large selection of professional fiber optic media converters for Fast Ethernet, Gigabit Ethernet network for different applications and environment.

JTOPTICS Power over Ethernet (PoE) is a technology that enables the safe transfer of Direct Current (DC) electrical power along with data over standard network cabling. Both the data and the power may share the same wire, and each is independent and unaffected by the other. PoE media converters function like other media converters that convert copper to fiber, but they also inject power over the UTP cabling.

JTOPTICS 
Fiber Optic Video Transmitter for CCTV Cameras Series support 1-64 Channels 8-bit digitally encoded broadcast quality video, data and 10M/100M IP Ethernet over one multi-mode fiber optic cable or single-mode fiber optic cable. The modules are directly compatible with NTSC, PAL, and SECAM camera systems and support RS-485, RS-232, and RS-422 data protocols. 
JTOPTICS Industrial Data converter provides electrical to optical conversion of electronic communication and data signals for transmission using fiber optic cable assemblies. The fiber optic modems simultaneously receive incoming optical signals over fiber optic cables and convert them back to the original electronic form signal for full duplex transmission.


Show:
Sort By:

JTOPTICS 10/100base-tx to 100base-fx Industrial Ethernet Media Converter Single Mode SM Dual Fiber, 1310nm, Sc, 20km Unmanaged

JTOPTICS Industrial Ethernet Media Converters address the need for transparently connecting 10/100 Ethernet equipment that operate in extreme temperatures to fiber optic cable. Our Media Converters will operate in industrial grade temperatures of -40F to +167F (-40C to +75C). Built-in 10/100 switch enables the fiber able connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub.10/100BaseT(X) auto-negotiation and auto-MDILink Fault Pass-Through (LFP)Power failure, port break alarm by relay output-40 to 75°C operating temperature range (T models)Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx)Reliable and stable performance..

₹ 5,664.00 Ex Tax: ₹ 4,800.00

JTOPTICS Gigabite Industrial Ethernet Media Converter SM Dual Fiber, 1310nm, Single Mode, Sc, 20km Unmanaged

JTOPTICS Gigabit Industrial Fiber Media Converter is a kind of 1000Mbps intelligent adaptive gigabit Ethernet to fiber converter. Industrial media converters are specially designed for the harsh environment applications. It can convert and transmit Gigabit Ethernet networks into Gigabit fiber optic networks, and it is applied in Gigabit Ethernet as copper to fiber conversion equipment. Industrial Temperature Media Converters address the need for transparently connecting 10/100/1000 Ethernet equipment that operate in extreme temperatures to fiber optic cable. Our Media Converters will operate in industrial grade temperatures of -40F to +167F (-40C to +75C). 10/100/1000BaseT(X) auto-negotiation and auto-MDILink Fault Pass-Through (LFP)Power failure, port break alarm by relay output-40 to 75°C operating temperature range (T models)Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx)Reliable and stable performance..

₹ 6,726.00 Ex Tax: ₹ 5,700.00

JTOPTICS 100base-t to 100base-fx Ethernet Media Converter Single Mode Single Fiber, Sc, 1310nm, 20km Unmanaged Pair

JTOPTICS Single fiber media converter, also referred to as BiDi or simplex media converter, can make the customers to extend the Ethernet connections across a single fiber link. JTOPTICS BIDI Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port with Auto-MDIX capability for more convenient connection on single fiber. Built-in 10/100 switch enables the fiber able connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network.Complied with IEEE802.3 10Base-T, IEEE802.3u 100Base-T and 100Base-FXAuto-adaptation                                                                Support Full/half-duplex mode at twisted pair portSupport Auto MDI/MDIX without need of cable selectionUp to 6 LEDs for status indicationExternal and built-in DC power supplies128 kb data integra..

₹ 2,832.00 Ex Tax: ₹ 2,400.00

JTOPTICS Gigabit Ethernet Media Converter Single Mode Single Fiber, SM, Sc, 1310nm, 20km Unmanaged Pair

JTOPTICS Gigabit Ethernet to single fiber converter can convert and transmit Gigabit Ethernet networks into Gigabit fiber optic networks on single fiber, it is used in Gigabit Ethernet as copper to fiber conversion equipment. Each Media Converter provides a 10/100/1000BaseT/TX auto-negotiating RJ-45 twisted-pair connector port with Auto-MDIX capability for more convenient connection. Built-in 10/100/1000 switch enables the fiber able connection to operate at 1000 Mbps connected to either a 10BaseT or 100BaseTX or 1000BaseTX network, while remaining completely 1000BaseFX standard-compliant.10/100/1000Mbps auto-negotiationIEEE 802.3x full-duplex flow control and back pressure half-duplex flow controlSupports MAC self-learningStandards: Complied with IEEE802.3 10Base-T, IEEE802.3u 100Base-T IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-FX                                           ..

₹ 2,832.00 Ex Tax: ₹ 2,400.00

JTOPTICS Ethernet Media Converter 100base-t to 100base-fx Single Mode Dual fiber, SM, 1310nm, Sc, 20km Unmanaged

JTOPTICS Ethernet to Dual fiber converter can convert and transmit Ethernet networks into fiber optic networks on dual fiber, it is used in Ethernet as copper to fiber conversion equipment. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port with Auto-MDIX capability for more convenient connection. Built-in 10/100 switch enables the fiber able connection to operate at 100 Mbps connected to either a 10BaseT or 100BaseTX network, while remaining completely 100BaseFX standard-compliantComplied with IEEE802.3 10Base-T, IEEE802.3u 100Base-T and 100Base-FXAuto-adaptation                                                                Support Full/half-duplex mode at twisted pair portSupport Auto MDI/MDIX without need of cable selectionUp to 6 LEDs for status indicationExternal and buil..

₹ 1,416.00 Ex Tax: ₹ 1,200.00

JTOPTICS Multimode to Single Mode Media Converter, MM to SM Optical Fiber Converter, Sc Dual fiber , 20km Unmanaged

JTOPTICS Single mode to Multimode Media Optical Converter is a device to conduct the transparent conversion between the media of single mode and multimode optical fiber. It is used in the applications where media conversion required between multimode segments separated by long distances. We offer different single mode to multimode media converters from 850nm to 1310nm wavelengths. Multimode to Single mode Converters provide efficient solutions for interconnecting multimode fiber LANs over longer distances by integrating single mode fiber optic cable into the LAN. The converter also enables Ethernet LAN and WAN connectivity, by providing a multimode interface to single mode fiber carrier demarcation points.Extend a Ethernet backbone connection up to 20 km for MAN applicationsConverts Multimode  to Single mode  (and vice versa)Converts Single mode to Single mode or Multimode to MultimodeIncreases Distance Between NodesCross Connects Fiber TypesPerforms Optical Repeater Function..

₹ 1,652.00 Ex Tax: ₹ 1,400.00

JTOPTICS Sfp Based Ethernet Media Converter Without SFP Module Unmanaged

JTOPTICS SFP based Ethernet to Fiber Converters provide an economical path to extend the distance of an existing network, the life of non-fiber based equipment, or the distance between two devices.  The pluggable fiber optics port allows for flexible network configurations using SFP transceivers supplied by us or other manufacturers of MSA compliant SFPs. For steady and reliable performance it is designed in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission.Complied with IEEE802.3 10Base-T, IEEE802.3u 100Base-TIEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-FXAuto-adaptation rateSupport Full/half-duplex mode at twisted pair portSupport Auto MDI/MDIX without need of cable selectionUp to 6 LEDs for status indicationExternal and built-in DC power suppliesSupport up to 1024 MAC addresses512 kb data integrated storage..

₹ 1,239.00 Ex Tax: ₹ 1,050.00

JTOPTICS 1 Channel Ahd Hdcvi Hdtvi Camera Video Fiber Optical Transmitter Receiver With Rs485 Return Data, 1080P, Smf, Fc, 20Km Pair

HDTVI/HDCVI/AHD Video to Optical fiber converter required to transmit HDTVI/HDCVI/AHD Camera Video to long distance (Up to 80km) over optical fiber. 1 Channel HDTVI/HDCVI/AHD to Fiber Converter can simultaneously transmit 1 channels of HDTVI/HDCVI/AHD Video over one single-mode optical fiber. LED indicators are provided for instantly monitoring system status. Compatible with HDTVI/HDCVI/AHD-H, HDTVI/HDCVI/AHD-M , HDTVI/HDCVI/AHD-L. Lossless non-compression real time transmission. Electronic and optical adjustments are never required. Compatible with 1080P/50,1080P/60 Lossless non-compression real time transmission.10-bit digitally encoded and non-compression broadcast quality video transmissionDirectly compatible with NTSC, PAL, and SECAM CCTV camera systemsSupport analog video signal VIDEO : 1080P/50,1080P/60Video Supported: 1-ch unidirectional, Data: 1-ch reverse RS485..

₹ 10,148.00 Ex Tax: ₹ 8,600.00

JTOPTICS 1000base-t to 1000base-fx Ethernet Optical Media Converter Single Mode Dual fiber, 1310nm, Sc, 20km Unmanaged

JTOPTICS Gigabit Ethernet to Dual fiber converter can convert and transmit Gigabit Ethernet networks into Gigabit fiber optic networks on dual fiber, it is used in Gigabit Ethernet as copper to fiber conversion equipment. Each Media Converter provides a 10/100/1000BaseT/TX auto-negotiating RJ-45 twisted-pair connector port with Auto-MDIX capability for more convenient connection. Built-in 10/100/1000 switch enables the fiber able connection to operate at 1000 Mbps connected to either a 10BaseT or 100BaseTX or 1000BaseTX network, while remaining completely 1000BaseFX standard-compliant10/100/1000Mbps auto-negotiationIEEE 802.3x full-duplex flow control and back pressure half-duplex flow controlSupports MAC self-learningStandards: Complied with IEEE802.3 10Base-T, IEEE802.3u 100Base-T IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-FX                                            &nb..

₹ 2,832.00 Ex Tax: ₹ 2,400.00

JTOPTICS 4 Channel Ahd Hdcvi Hdtvi Camera Video Fiber Optical Transmitter Receiver With Rs485 Return Data, 1080P, Smf, Fc, 20Km Pair

HDTVI/HDCVI/AHD Video to Optical fiber converter required to transmit HDTVI/HDCVI/AHD Camera Video to long distance over optical fiber. 4 Channel HDTVI/HDCVI/AHD to Fiber Converter can simultaneously transmit 4 channels of HDTVI/HDCVI/AHD Video over one single-mode optical fiber. LED indicators are provided for instantly monitoring system status. Compatible with HDTVI/HDCVI/AHD-H, HDTVI/HDCVI/AHD-M , HDTVI/HDCVI/AHD-L. Lossless non-compression real time transmission. Electronic and optical adjustments are never required. Compatible with 1080P/50,1080P/60 Lossless non-compression real time transmission. 10-bit digitally encoded and non-compression broadcast quality video transmissionDirectly compatible with NTSC, PAL, and SECAM CCTV camera systemsSupport analog video signal VIDEO : 1080P/50,1080P/60Video Supported: 4-ch unidirectional, Data: 1-ch reverse RS485..

₹ 14,868.00 Ex Tax: ₹ 12,600.00

JTOPTICS 8 Channel Ahd Hdcvi Hdtvi Camera Video Fiber Optical Transmitter Receiver With Rs485 Return Data, 1080P, Smf, Fc, 20Km Pair

HDTVI/HDCVI/AHD Video to Optical fiber converter required to transmit HDTVI/HDCVI/AHD Camera Video to long distance over optical fiber. 8 Channel HDTVI/HDCVI/AHD to Fiber Converter can simultaneously transmit 8 channels of HDTVI/HDCVI/AHD Video over one single-mode optical fiber. LED indicators are provided for instantly monitoring system status. Compatible with HDTVI/HDCVI/AHD-H, HDTVI/HDCVI/AHD-M , HDTVI/HDCVI/AHD-L. Lossless non-compression real time transmission. Electronic and optical adjustments are never required. Compatible with 1080P/50,1080P/60 Lossless non-compression real time transmission. 10-bit digitally encoded and non-compression broadcast quality video transmissionDirectly compatible with NTSC, PAL, and SECAM CCTV camera systemsSupport analog video signal VIDEO : 1080P/50,1080P/60Video Supported: 8-ch unidirectional, Data: 1-ch reverse RS485..

₹ 19,352.00 Ex Tax: ₹ 16,400.00

JTOPTICS Hdmi Video Transmitter and Receiver Over Single Mode Optical Fiber Upto 10Km, Single fiber, SM, 1080p, Sc, 1310nm, 10km Pair

Full digital video  (HDMI) to Optical transceiver, it designed on real-time synchronize one-way high-definition HDMI video and data/ switching value in single-core optical fiber and achieve lossless and high-quality transfer. Advanced high-stability components are used in optic circuit and core circuit of JT high-definition full digital video optical transmitter and receiver, and all optical/electric interfaces are in accordance with international standards, free from prior adjustment to mounting and applicable in various operating environments. FS3511-T/R supports WUXGA (1920 x 1200 @ 60 Hz) or 1080P/1080i/1080pSupport HDTV highest resolution 1080P3Support HDMI interface, compatible with HDMI 1.2a standardSupport input and output signal indicatingPlug and PlayVIDEO SPEC: 1080P 30 H..

₹ 16,520.00 Ex Tax: ₹ 14,000.00

JTOPTICS Vga Video Transmitter and Receiver Over Single Mode Optical Fiber Upto 10Km, Single fiber, SM, 1080p, Sc, 1310nm, 10km Pair

VGA to Fiber Optics Transmitter/Receiver digitally transmits high-resolution VGA/RGB (up to WXGA) and stereo audio over one single-core fiber, single-mode, 1310 nm wavelength. Ideal for point-to-point, point-to-multipoint and drop-and-repeat applications, it supports VGA, SVGA, XGA and WXGA (640 x 480, 1024*768, and 1280*1024, up to 1366 x 768) or RGBHV formatAudio Channel: 1 channel bidirectional stereo AudioVideo Channel: 1 channel UnidirectionalTransmission Distance:10kmFiber Type: Single-mode SimplexCRAFT: uncompressed technologyHighest resolution: 1920x1080@60..

₹ 15,930.00 Ex Tax: ₹ 13,500.00

Talk to an expert


+91-86-9309-9309

+91-79-7755-7756

Email us for expert advice


info@jtoptics.com

sales@jtoptics.com

Live Chat


Our Help Desk center is the most extensive information resource

WhatsApp


+91-8693099309

+91-9699789777

Track Order